Two or three weeks IIRC. Be sure to check the hole spacing on the track. My OEM track was 4 inches. If you need to glass in the old holes and red rill, that can be a PITA.
Sent from my iPad > On Jul 11, 2017, at 15:00, Sean Richardson via CnC-List > <cnc-list@cnc-list.com> wrote: > > Certainly seems Garhauer is the way to go Rick. What was the turnaround time > like on your order? > > > > The Lewmar looks like it could be a quick “off the shelf” solution though. > > > > PS. The old pin stop is a PIA > > > > Sean > > C&C 27 MKIII > > LYNX > > >> On Tue, Jul 11, 2017 at 2:08 PM, Rick Brass via CnC-List >> <cnc-list@cnc-list.com> wrote: >> Call Guido at Garhauer. He made the traveler for my 38 with a tall track and >> the car sized to fit the well in the bridge deck. The hole spacing was made >> to match the pattern of the OEM traveler track. The length was custom for >> the boat. The turning blocks and cleats for the 6:1 adjuster lines were >> angled to allow adjusting from the helm when single handing. >> >> No extra charge for all the custom work. >> >> And it probably cost less than half the cost of the Lewmar traveler. >> >> Rick Brass >> >> Sent from my iPad >> >>> On Jul 11, 2017, at 10:11, Sean Richardson via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> >>> Hi Sylvain, >>> >>> >>> >>> I’m looking to upgrade the original pin stop traveler on my 27 mkIII. How >>> well did the Lewmar fit down in the original track recess and does it clear >>> the cockpit lockers on either side no problem? Would you happen to have any >>> pictures? >>> >>> >>> >>> >>> >>> Sean >>> >>> C&C 27 MKIII >>> >>> LYNX >>> >>> >>>> On Tue, May 2, 2017 at 7:37 PM, Sylvain Laplante via CnC-List >>>> <cnc-list@cnc-list.com> wrote: >>>> Hi, you may also want to take a look at Lewmar, their #1 model is fine on >>>> my 27 ( up to 36 feet supposedly), it runs on Torlon bearings an requires >>>> no drilling. Price was 400 can$ 3 years ago. >>>> Sylvain >>>> C&C 27 mkIII >>>> >>>> >>>> Envoyé de mon iPhone >>>> >>>>> Le 2 mai 2017 à 07:58, Joel Aronson via CnC-List <cnc-list@cnc-list.com> >>>>> a écrit : >>>>> >>>>> I had a Harken. Garhauer is 1/3 the price. >>>>> >>>>> Joel >>>>>> On Tue, May 2, 2017 at 12:30 AM Jim Watts via CnC-List >>>>>> <cnc-list@cnc-list.com> wrote: >>>>>> Harken Big Boat Traveler system, if you have a spare G-note or two lying >>>>>> in between the cushions on your couch. The original Schaefer stuff is >>>>>> obsolete at best, and not worth repairing. >>>>>> >>>>>> Jim Watts >>>>>> Paradigm Shift >>>>>> C&C 35 Mk III >>>>>> Victoria, BC >>>>>> >>>>>>> On 1 May 2017 at 19:10, Jean-Guy Nadeau via CnC-List >>>>>>> <cnc-list@cnc-list.com> wrote: >>>>>>> My track slide is very difficult to move. The wheels are worn and do >>>>>>> not turn easily any more. Has anyone found a suitable replacement >>>>>>> system or parts to repair the existing system? >>>>>>> >>>>>>> Cheers, J-G >>>>>>> >>>>>>> _______________________________________________ >>>>>>> >>>>>>> This list is supported by the generous donations of our members. If you >>>>>>> wish to make a contribution to offset our costs, please go to: >>>>>>> https://www.paypal.me/stumurray >>>>>>> >>>>>>> All Contributions are greatly appreciated! >>>>>> >>>>>> _______________________________________________ >>>>>> >>>>>> This list is supported by the generous donations of our members. If you >>>>>> wish to make a contribution to offset our costs, please go to: >>>>>> https://www.paypal.me/stumurray >>>>>> >>>>>> All Contributions are greatly appreciated! >>>>> >>>>> -- >>>>> Joel >>>>> 301 541 8551 >>>>> _______________________________________________ >>>>> >>>>> This list is supported by the generous donations of our members. If you >>>>> wish to make a contribution to offset our costs, please go to: >>>>> https://www.paypal.me/stumurray >>>>> >>>>> All Contributions are greatly appreciated! >>>> >>>> _______________________________________________ >>>> >>>> This list is supported by the generous donations of our members. If you >>>> wish to make a contribution to offset our costs, please go to: >>>> https://www.paypal.me/stumurray >>>> >>>> All Contributions are greatly appreciated! >>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you wish >> to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
