Certainly seems Garhauer is the way to go Rick. What was the turnaround time like on your order?
The Lewmar looks like it could be a quick “off the shelf” solution though. PS. The old pin stop is a PIA Sean C&C 27 MKIII LYNX On Tue, Jul 11, 2017 at 2:08 PM, Rick Brass via CnC-List < cnc-list@cnc-list.com> wrote: > Call Guido at Garhauer. He made the traveler for my 38 with a tall track > and the car sized to fit the well in the bridge deck. The hole spacing was > made to match the pattern of the OEM traveler track. The length was custom > for the boat. The turning blocks and cleats for the 6:1 adjuster lines were > angled to allow adjusting from the helm when single handing. > > No extra charge for all the custom work. > > And it probably cost less than half the cost of the Lewmar traveler. > > Rick Brass > > Sent from my iPad > > On Jul 11, 2017, at 10:11, Sean Richardson via CnC-List < > cnc-list@cnc-list.com> wrote: > > Hi Sylvain, > > > > I’m looking to upgrade the original pin stop traveler on my 27 mkIII. How > well did the Lewmar fit down in the original track recess and does it clear > the cockpit lockers on either side no problem? Would you happen to have any > pictures? > > > > > > Sean > > C&C 27 MKIII > > LYNX > > On Tue, May 2, 2017 at 7:37 PM, Sylvain Laplante via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Hi, you may also want to take a look at Lewmar, their #1 model is fine on >> my 27 ( up to 36 feet supposedly), it runs on Torlon bearings an requires >> no drilling. Price was 400 can$ 3 years ago. >> Sylvain >> C&C 27 mkIII >> >> >> Envoyé de mon iPhone >> >> Le 2 mai 2017 à 07:58, Joel Aronson via CnC-List <cnc-list@cnc-list.com> >> a écrit : >> >> I had a Harken. Garhauer is 1/3 the price. >> >> Joel >> On Tue, May 2, 2017 at 12:30 AM Jim Watts via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> Harken Big Boat Traveler system, if you have a spare G-note or two lying >>> in between the cushions on your couch. The original Schaefer stuff is >>> obsolete at best, and not worth repairing. >>> >>> Jim Watts >>> Paradigm Shift >>> C&C 35 Mk III >>> Victoria, BC >>> >>> On 1 May 2017 at 19:10, Jean-Guy Nadeau via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>>> My track slide is very difficult to move. The wheels are worn and do >>>> not turn easily any more. Has anyone found a suitable replacement system or >>>> parts to repair the existing system? >>>> >>>> Cheers, J-G >>>> >>>> _______________________________________________ >>>> >>>> This list is supported by the generous donations of our members. If you >>>> wish to make a contribution to offset our costs, please go to: >>>> https://www.paypal.me/stumurray >>>> >>>> All Contributions are greatly appreciated! >>>> >>>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >>> >> -- >> Joel >> 301 541 8551 <(301)%20541-8551> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> >> > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
