I had Garhauer custom make a traveler for my LF38. Was about $500. Great investment. Turn time was about 3 weeks because I had my sailmaker handle it.
Sent from my T-Mobile 4G LTE DeviceDoug Mountjoy POYC Pegasus (for sale)Lf38 Significant Other LF39 -------- Original message --------From: Rick Brass via CnC-List <cnc-list@cnc-list.com> Date: 7/11/17 11:08 (GMT-08:00) To: cnc-list@cnc-list.com Cc: Rick Brass <rickbr...@earthlink.net> Subject: Re: Stus-List Traveler for C&C 35 Mk II Call Guido at Garhauer. He made the traveler for my 38 with a tall track and the car sized to fit the well in the bridge deck. The hole spacing was made to match the pattern of the OEM traveler track. The length was custom for the boat. The turning blocks and cleats for the 6:1 adjuster lines were angled to allow adjusting from the helm when single handing. No extra charge for all the custom work. And it probably cost less than half the cost of the Lewmar traveler. Rick Brass Sent from my iPad On Jul 11, 2017, at 10:11, Sean Richardson via CnC-List <cnc-list@cnc-list.com> wrote: Hi Sylvain, I’m looking to upgrade the original pin stop traveler on my 27 mkIII. How well did the Lewmar fit down in the original track recess and does it clear the cockpit lockers on either side no problem? Would you happen to have any pictures? Sean C&C 27 MKIII LYNX On Tue, May 2, 2017 at 7:37 PM, Sylvain Laplante via CnC-List <cnc-list@cnc-list.com> wrote: Hi, you may also want to take a look at Lewmar, their #1 model is fine on my 27 ( up to 36 feet supposedly), it runs on Torlon bearings an requires no drilling. Price was 400 can$ 3 years ago.Sylvain C&C 27 mkIII Envoyé de mon iPhone Le 2 mai 2017 à 07:58, Joel Aronson via CnC-List <cnc-list@cnc-list.com> a écrit : I had a Harken. Garhauer is 1/3 the price. Joel On Tue, May 2, 2017 at 12:30 AM Jim Watts via CnC-List <cnc-list@cnc-list.com> wrote: Harken Big Boat Traveler system, if you have a spare G-note or two lying in between the cushions on your couch. The original Schaefer stuff is obsolete at best, and not worth repairing. Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 1 May 2017 at 19:10, Jean-Guy Nadeau via CnC-List <cnc-list@cnc-list.com> wrote: My track slide is very difficult to move. The wheels are worn and do not turn easily any more. Has anyone found a suitable replacement system or parts to repair the existing system? Cheers, J-G _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! -- Joel 301 541 8551 _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
