Call Guido at Garhauer. He made the traveler for my 38 with a tall track and the car sized to fit the well in the bridge deck. The hole spacing was made to match the pattern of the OEM traveler track. The length was custom for the boat. The turning blocks and cleats for the 6:1 adjuster lines were angled to allow adjusting from the helm when single handing.
No extra charge for all the custom work. And it probably cost less than half the cost of the Lewmar traveler. Rick Brass Sent from my iPad > On Jul 11, 2017, at 10:11, Sean Richardson via CnC-List > <cnc-list@cnc-list.com> wrote: > > Hi Sylvain, > > > > I’m looking to upgrade the original pin stop traveler on my 27 mkIII. How > well did the Lewmar fit down in the original track recess and does it clear > the cockpit lockers on either side no problem? Would you happen to have any > pictures? > > > > > > Sean > > C&C 27 MKIII > > LYNX > > >> On Tue, May 2, 2017 at 7:37 PM, Sylvain Laplante via CnC-List >> <cnc-list@cnc-list.com> wrote: >> Hi, you may also want to take a look at Lewmar, their #1 model is fine on my >> 27 ( up to 36 feet supposedly), it runs on Torlon bearings an requires no >> drilling. Price was 400 can$ 3 years ago. >> Sylvain >> C&C 27 mkIII >> >> >> Envoyé de mon iPhone >> >>> Le 2 mai 2017 à 07:58, Joel Aronson via CnC-List <cnc-list@cnc-list.com> a >>> écrit : >>> >>> I had a Harken. Garhauer is 1/3 the price. >>> >>> Joel >>>> On Tue, May 2, 2017 at 12:30 AM Jim Watts via CnC-List >>>> <cnc-list@cnc-list.com> wrote: >>>> Harken Big Boat Traveler system, if you have a spare G-note or two lying >>>> in between the cushions on your couch. The original Schaefer stuff is >>>> obsolete at best, and not worth repairing. >>>> >>>> Jim Watts >>>> Paradigm Shift >>>> C&C 35 Mk III >>>> Victoria, BC >>>> >>>>> On 1 May 2017 at 19:10, Jean-Guy Nadeau via CnC-List >>>>> <cnc-list@cnc-list.com> wrote: >>>>> My track slide is very difficult to move. The wheels are worn and do not >>>>> turn easily any more. Has anyone found a suitable replacement system or >>>>> parts to repair the existing system? >>>>> >>>>> Cheers, J-G >>>>> >>>>> _______________________________________________ >>>>> >>>>> This list is supported by the generous donations of our members. If you >>>>> wish to make a contribution to offset our costs, please go to: >>>>> https://www.paypal.me/stumurray >>>>> >>>>> All Contributions are greatly appreciated! >>>> >>>> _______________________________________________ >>>> >>>> This list is supported by the generous donations of our members. If you >>>> wish to make a contribution to offset our costs, please go to: >>>> https://www.paypal.me/stumurray >>>> >>>> All Contributions are greatly appreciated! >>> >>> -- >>> Joel >>> 301 541 8551 >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you wish >> to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
