I expect to have the first set of polycarbonate nameplates next week. Gary S/V High Maintenance '90 C&C 37+ East Greenwich, RI, USA
~~~~~~~_/)~~~~~~ On Thu, Jan 14, 2016 at 10:03 AM, Bill Coleman via CnC-List < cnc-list@cnc-list.com> wrote: > Check With Vanna, I am sure she can help! > > > > Bill Coleman > > C&C 39 Erie, PA > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Gary > Russell via CnC-List > *Sent:* Wednesday, January 13, 2016 4:46 PM > *To:* C&C List > *Cc:* Gary Russell > *Subject:* Re: Stus-List Name plates > > > > OK, so now I'm in need of an 'R'. Has anyone got a good picture of the > black plastic 'R' that I can use to model for our race version friends? > The picture needs to be pretty straight on. > > > > Gary > > > ~~~~~~~_/)~~~~~~ > > > > On Wed, Jan 13, 2016 at 11:40 AM, Ken Heaton via CnC-List < > cnc-list@cnc-list.com> wrote: > > No, I'm pretty sure this boat had the plastic nameplate when new. I don't > have any photos of her from that time to confirm this. > > > > One of the past owners had the deck completely redone. I assume these > plates were mad up at that time. > > > > Ken H. > > > > > > On 13 January 2016 at 12:27, Gary Russell via CnC-List < > cnc-list@cnc-list.com> wrote: > > Ken, > > Is that an original setup? > > Gary > > > ~~~~~~~_/)~~~~~~ > > > > On Wed, Jan 13, 2016 at 11:00 AM, Ken Heaton via CnC-List < > cnc-list@cnc-list.com> wrote: > > Mine are held on with two screws. > > > > A couple of photos of mine here (before I repainted the infill): > > > > https://goo.gl/photos/pfgf9C6cMP35cnL28 > > > > https://goo.gl/photos/3Gh7ysq54Y3eHaoG8 > > > > Ken H. > > > > > > On 13 January 2016 at 11:48, Mitchell's via CnC-List < > cnc-list@cnc-list.com> wrote: > > Gary&Josh, > I have been holding off until the final prototype has been completed and > the price has been established. The Canadian peso and where they are built > is a factor too. My polycarbonate name plate is like new considering it > lives under the dodger in the summer sun. That said, I am also interested, > there may not be another opportunity to buy a new set at a group purchase > price. My concern is the mounting of the plates and possible need to remove > the old one. How are Ken's fastened and where? Has anyone removed theirs > and how were they originally fastened? Window epoxy? > I want to take a picture of mine under the winter cover but we are getting > a good winter snow storm so maybe later this week. > > Gary, Thanks for your time and including the list! > > Len Mitchell > CRAZY LEGS > 1989 37+ > Midland Ontario > > > > Sent from my mobile device. > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
