No, I'm pretty sure this boat had the plastic nameplate when new. I don't have any photos of her from that time to confirm this.
One of the past owners had the deck completely redone. I assume these plates were mad up at that time. Ken H. On 13 January 2016 at 12:27, Gary Russell via CnC-List < cnc-list@cnc-list.com> wrote: > Ken, > Is that an original setup? > Gary > > ~~~~~~~_/)~~~~~~ > > > On Wed, Jan 13, 2016 at 11:00 AM, Ken Heaton via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Mine are held on with two screws. >> >> A couple of photos of mine here (before I repainted the infill): >> >> https://goo.gl/photos/pfgf9C6cMP35cnL28 >> >> https://goo.gl/photos/3Gh7ysq54Y3eHaoG8 >> >> Ken H. >> >> >> On 13 January 2016 at 11:48, Mitchell's via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> Gary&Josh, >>> I have been holding off until the final prototype has been completed and >>> the price has been established. The Canadian peso and where they are built >>> is a factor too. My polycarbonate name plate is like new considering it >>> lives under the dodger in the summer sun. That said, I am also interested, >>> there may not be another opportunity to buy a new set at a group purchase >>> price. My concern is the mounting of the plates and possible need to remove >>> the old one. How are Ken's fastened and where? Has anyone removed theirs >>> and how were they originally fastened? Window epoxy? >>> I want to take a picture of mine under the winter cover but we are >>> getting a good winter snow storm so maybe later this week. >>> >>> Gary, Thanks for your time and including the list! >>> >>> Len Mitchell >>> CRAZY LEGS >>> 1989 37+ >>> Midland Ontario >>> >>> >>> >>> Sent from my mobile device. >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
