OK, so now I'm in need of an 'R'. Has anyone got a good picture of the black plastic 'R' that I can use to model for our race version friends? The picture needs to be pretty straight on.
Gary ~~~~~~~_/)~~~~~~ On Wed, Jan 13, 2016 at 11:40 AM, Ken Heaton via CnC-List < cnc-list@cnc-list.com> wrote: > No, I'm pretty sure this boat had the plastic nameplate when new. I don't > have any photos of her from that time to confirm this. > > One of the past owners had the deck completely redone. I assume these > plates were mad up at that time. > > Ken H. > > > On 13 January 2016 at 12:27, Gary Russell via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Ken, >> Is that an original setup? >> Gary >> >> ~~~~~~~_/)~~~~~~ >> >> >> On Wed, Jan 13, 2016 at 11:00 AM, Ken Heaton via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> Mine are held on with two screws. >>> >>> A couple of photos of mine here (before I repainted the infill): >>> >>> https://goo.gl/photos/pfgf9C6cMP35cnL28 >>> >>> https://goo.gl/photos/3Gh7ysq54Y3eHaoG8 >>> >>> Ken H. >>> >>> >>> On 13 January 2016 at 11:48, Mitchell's via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>>> Gary&Josh, >>>> I have been holding off until the final prototype has been completed >>>> and the price has been established. The Canadian peso and where they are >>>> built is a factor too. My polycarbonate name plate is like new considering >>>> it lives under the dodger in the summer sun. That said, I am also >>>> interested, there may not be another opportunity to buy a new set at a >>>> group purchase price. My concern is the mounting of the plates and possible >>>> need to remove the old one. How are Ken's fastened and where? Has anyone >>>> removed theirs and how were they originally fastened? Window epoxy? >>>> I want to take a picture of mine under the winter cover but we are >>>> getting a good winter snow storm so maybe later this week. >>>> >>>> Gary, Thanks for your time and including the list! >>>> >>>> Len Mitchell >>>> CRAZY LEGS >>>> 1989 37+ >>>> Midland Ontario >>>> >>>> >>>> >>>> Sent from my mobile device. >>>> _______________________________________________ >>>> >>>> Email address: >>>> CnC-List@cnc-list.com >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
