Thank you. Unfortunately, the font for the flat labels is different than those of the original plastic reliefs. It does give me a starting place, however. I've managed to get a pretty good 'R'.
Gary ~~~~~~~_/)~~~~~~ On Wed, Jan 13, 2016 at 8:40 PM, Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > Gary, > > I straightened and aligned the plates from Ken's links. You should be > able to pull an "R". A benefit of this is that you also get a "4" and a > "0". > > See attached. > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > On Jan 13, 2016 4:48 PM, "Gary Russell via CnC-List" < > cnc-list@cnc-list.com> wrote: > >> OK, so now I'm in need of an 'R'. Has anyone got a good picture of the >> black plastic 'R' that I can use to model for our race version friends? >> The picture needs to be pretty straight on. >> >> Gary >> >> ~~~~~~~_/)~~~~~~ >> >> >> On Wed, Jan 13, 2016 at 11:40 AM, Ken Heaton via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> No, I'm pretty sure this boat had the plastic nameplate when new. I >>> don't have any photos of her from that time to confirm this. >>> >>> One of the past owners had the deck completely redone. I assume these >>> plates were mad up at that time. >>> >>> Ken H. >>> >>> >>> On 13 January 2016 at 12:27, Gary Russell via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>>> Ken, >>>> Is that an original setup? >>>> Gary >>>> >>>> ~~~~~~~_/)~~~~~~ >>>> >>>> >>>> On Wed, Jan 13, 2016 at 11:00 AM, Ken Heaton via CnC-List < >>>> cnc-list@cnc-list.com> wrote: >>>> >>>>> Mine are held on with two screws. >>>>> >>>>> A couple of photos of mine here (before I repainted the infill): >>>>> >>>>> https://goo.gl/photos/pfgf9C6cMP35cnL28 >>>>> >>>>> https://goo.gl/photos/3Gh7ysq54Y3eHaoG8 >>>>> >>>>> Ken H. >>>>> >>>>> >>>>> On 13 January 2016 at 11:48, Mitchell's via CnC-List < >>>>> cnc-list@cnc-list.com> wrote: >>>>> >>>>>> Gary&Josh, >>>>>> I have been holding off until the final prototype has been completed >>>>>> and the price has been established. The Canadian peso and where they are >>>>>> built is a factor too. My polycarbonate name plate is like new >>>>>> considering >>>>>> it lives under the dodger in the summer sun. That said, I am also >>>>>> interested, there may not be another opportunity to buy a new set at a >>>>>> group purchase price. My concern is the mounting of the plates and >>>>>> possible >>>>>> need to remove the old one. How are Ken's fastened and where? Has anyone >>>>>> removed theirs and how were they originally fastened? Window epoxy? >>>>>> I want to take a picture of mine under the winter cover but we are >>>>>> getting a good winter snow storm so maybe later this week. >>>>>> >>>>>> Gary, Thanks for your time and including the list! >>>>>> >>>>>> Len Mitchell >>>>>> CRAZY LEGS >>>>>> 1989 37+ >>>>>> Midland Ontario >>>>>> >>>>>> >>>>>> >>>>>> Sent from my mobile device. >>>>>> _______________________________________________ >>>>>> >>>>>> Email address: >>>>>> CnC-List@cnc-list.com >>>>>> To change your list preferences, including unsubscribing -- go to the >>>>>> bottom of page at: >>>>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> >>>>> Email address: >>>>> CnC-List@cnc-list.com >>>>> To change your list preferences, including unsubscribing -- go to the >>>>> bottom of page at: >>>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>>> >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> >>>> Email address: >>>> CnC-List@cnc-list.com >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>>> >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
