Gary, I straightened and aligned the plates from Ken's links. You should be able to pull an "R". A benefit of this is that you also get a "4" and a "0".
See attached. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Jan 13, 2016 4:48 PM, "Gary Russell via CnC-List" <cnc-list@cnc-list.com> wrote: > OK, so now I'm in need of an 'R'. Has anyone got a good picture of the > black plastic 'R' that I can use to model for our race version friends? > The picture needs to be pretty straight on. > > Gary > > ~~~~~~~_/)~~~~~~ > > > On Wed, Jan 13, 2016 at 11:40 AM, Ken Heaton via CnC-List < > cnc-list@cnc-list.com> wrote: > >> No, I'm pretty sure this boat had the plastic nameplate when new. I >> don't have any photos of her from that time to confirm this. >> >> One of the past owners had the deck completely redone. I assume these >> plates were mad up at that time. >> >> Ken H. >> >> >> On 13 January 2016 at 12:27, Gary Russell via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> Ken, >>> Is that an original setup? >>> Gary >>> >>> ~~~~~~~_/)~~~~~~ >>> >>> >>> On Wed, Jan 13, 2016 at 11:00 AM, Ken Heaton via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>>> Mine are held on with two screws. >>>> >>>> A couple of photos of mine here (before I repainted the infill): >>>> >>>> https://goo.gl/photos/pfgf9C6cMP35cnL28 >>>> >>>> https://goo.gl/photos/3Gh7ysq54Y3eHaoG8 >>>> >>>> Ken H. >>>> >>>> >>>> On 13 January 2016 at 11:48, Mitchell's via CnC-List < >>>> cnc-list@cnc-list.com> wrote: >>>> >>>>> Gary&Josh, >>>>> I have been holding off until the final prototype has been completed >>>>> and the price has been established. The Canadian peso and where they are >>>>> built is a factor too. My polycarbonate name plate is like new considering >>>>> it lives under the dodger in the summer sun. That said, I am also >>>>> interested, there may not be another opportunity to buy a new set at a >>>>> group purchase price. My concern is the mounting of the plates and >>>>> possible >>>>> need to remove the old one. How are Ken's fastened and where? Has anyone >>>>> removed theirs and how were they originally fastened? Window epoxy? >>>>> I want to take a picture of mine under the winter cover but we are >>>>> getting a good winter snow storm so maybe later this week. >>>>> >>>>> Gary, Thanks for your time and including the list! >>>>> >>>>> Len Mitchell >>>>> CRAZY LEGS >>>>> 1989 37+ >>>>> Midland Ontario >>>>> >>>>> >>>>> >>>>> Sent from my mobile device. >>>>> _______________________________________________ >>>>> >>>>> Email address: >>>>> CnC-List@cnc-list.com >>>>> To change your list preferences, including unsubscribing -- go to the >>>>> bottom of page at: >>>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> >>>> Email address: >>>> CnC-List@cnc-list.com >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>>> >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
