Great minds... Rich Knowles Indigo. LF38 Halifax
On 2013-04-25, at 11:12, Stevan Plavsa <stevanpla...@gmail.com> wrote: I was thinking the same thing but I'm probably going to use aluminum angle stock. I have to get some anyway for another project and it's easy to work with. Steve C&C 32 Toronto On Wed, Apr 24, 2013 at 4:21 PM, Knowles Rich <r...@sailpower.ca> wrote: > I think so. There should not be much heat as there are no drivers or other > dissipators. > > Rich Knowles > Indigo. LF38 > Halifax > > On 2013-04-24, at 17:19, Graham Collins <cnclistforw...@hotmail.com> wrote: > > That will work perfectly, with the bonus that it will also shed some heat. > > Graham Collins > Secret Plans > C&C 35-III #11 > > On 2013-04-24 11:11 AM, Knowles Rich wrote: > > I have some LED strip lights to install. I'm going to try mounting them on > > the web of some aluminum curtain rod cut to length with mounting screw > > holes at the ends. The strips should adhere to the aluminum, I hope, and > > the aluminum will improve the light distribution and provide a rigid > > mounting. Maybe.... > > > > Rich Knowles > > Indigo. LF38 > > Halifax > > > > > > _______________________________________________ > > This List is provided by the C&C Photo Album > > http://www.cncphotoalbum.com > > CnC-List@cnc-list.com > > > > > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
