Dear Luka, Thanks for your revert. I have checked all ciscolive presentation before I have shooted question to the forum. I understand, LPM and LEM along with iTCAM support on C 540 does not exceed 400k but I was not getting details on rib/fib on ASR 1002-HX, in case you have found, please share with me.
Also, processing power of ASR vs C 540 is very different, one with quard core 1.2 GHz and another with 2.5 GHz, so I was also wondering if BGP scanner process will be good with which. If 540 can take care of scanning process!! Also internet does not inform about table-map (atleast, I couldn't find), on C 540, many thanks to Jason for details provided. Anyway, many thanks for the kind revert. Regards, Vikas On Thu, 9 Jul, 2020, 6:44 am Łukasz Bromirski, <[email protected]> wrote: > Vikas, > > First of all, NCS 540 ACC-SYS has 16GB of RAM. > > For NCS 540, slide 43: > > https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKSPG-2159.pdf > > Essentially, around 380k depending on prefix distribution. > > For ASR 1002-HX it’s here: > > https://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/datasheet-c78-731640.html#PerformanceandScaling > > Please use your favorite search engine first in future. > > — > ./ > > On 9 Jul 2020, at 02:48, Vikas Sharma <[email protected]> wrote: > > Many thanks Jason for your quick response. > > If possible please also confirm the rib/fib limits of ASR1002-HX. > > I have two choices to be used as IGW, ASR1002-HX or C 540 X and I want to > choose the best of the two options. > > Regards, > Vikas > > On Thu, 9 Jul, 2020, 12:52 am Jason Lixfeld, <[email protected]> wrote: > > Hi, > > I don’t know the exact RIB scale, if there is one, short of what available > memory will hold. That said, it’s got 8GB of memory, and I’ve seen 1.7M+ > BGP prefixes with the BGP process consuming about 1.9GB of memory. > > It won’t hold a full table in FIB. 350K max, protocol independent, > depending on the prefix size. > > SRD is implemented using table-policy. > > On Jul 8, 2020, at 3:02 PM, Vikas Sharma <[email protected]> wrote: > > Dear, > > Can someone please confirm how many routes are supported in above model > > in > > both rib and fib? > > Also, I am not able to find table-map command for this router. > > Any suggestions? > > Regards, > > Vikas > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
