Many thanks Jason for your quick response. If possible please also confirm the rib/fib limits of ASR1002-HX.
I have two choices to be used as IGW, ASR1002-HX or C 540 X and I want to choose the best of the two options. Regards, Vikas On Thu, 9 Jul, 2020, 12:52 am Jason Lixfeld, <[email protected]> wrote: > Hi, > > I don’t know the exact RIB scale, if there is one, short of what available > memory will hold. That said, it’s got 8GB of memory, and I’ve seen 1.7M+ > BGP prefixes with the BGP process consuming about 1.9GB of memory. > > It won’t hold a full table in FIB. 350K max, protocol independent, > depending on the prefix size. > > SRD is implemented using table-policy. > > > On Jul 8, 2020, at 3:02 PM, Vikas Sharma <[email protected]> wrote: > > > > Dear, > > > > Can someone please confirm how many routes are supported in above model > in > > both rib and fib? > > > > Also, I am not able to find table-map command for this router. > > > > Any suggestions? > > > > Regards, > > > > Vikas > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
