Hello Joe, Any word on this?
I'm just curious to know how you are able to do Trunking on a 10-BaseT interface. I thought that wasn't possible. At least not on a 2610! I've tried with several IOS versions including the latest one (12.3.26) and the "encapsulation" command is not available. Please let me know. Thank you! --- On Wed, 7/1/09, Joe Astorino <[email protected]> wrote: From: Joe Astorino <[email protected]> Subject: Re: [OSL | CCIE_RS] Question about encapsulation dot1q Ethernet 10-BaseT interfaces To: "Carlos Valero" <[email protected]> Cc: [email protected] Date: Wednesday, July 1, 2009, 7:53 PM Hi Carlos, As soon as I can get access to a Proctor Labs rack, I will let you know. On Wed, Jul 1, 2009 at 7:50 PM, Carlos Valero <[email protected]> wrote: Hello Joe, Could you please tell me what IOS version you use in your 2610 BB Routers? Labs Vol 3.9 & 3.10 use encapsulation dot1q on the Ethernet interfaces on these Routers. But so far I have NOT found an IOS version that allows do1Q on an Ethernet interface. I thoughy you could only do that with a Fast Ethernet interface. Could you please let me know? Thank you! --- On Wed, 7/1/09, Joe Astorino <[email protected]> wrote: From: Joe Astorino <[email protected]> Subject: Re: [OSL | CCIE_RS] Question about topology To: "'Terry Vinson'" <[email protected]>, [email protected] Date: Wednesday, July 1, 2009, 2:06 PM Hey Terry, Well, in our topology we have Cat2-Cat4 as 3560 like you said. I would have to go through every lab and really see if there are any situations where you HAVE to have a 3560 to do something on a particular switch. Regards, Joe Astorino CCIE #24347 (R&S) Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Terry Vinson Sent: Wednesday, July 01, 2009 1:57 PM To: [email protected] Subject: [OSL | CCIE_RS] Question about topology Hi Guys, I use dynamips and 4 real switches in my personal rack. I have 2 3550's and 2 3560's. I see that the Version 11 Workbook 1 topology has 3 3560's, well that's not happening financially over here for quite sometime (if ever if my wife is to be believed). My question is where should I use the 2 3560's to get the best coverage of capabilities? I have to assume it will make a difference on some of the Switching labs, but I don't see a huge impact on the layer 3 stuff other than IPv6. Thanks, Terry Checked by AVG - www.avg.com Version: 8.5.375 / Virus Database: 270.13.0/2210 - Release Date: 07/01/09 05:53:00 -- Regards, Joe Astorino CCIE #24347 (R&S) Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com
