Hello Joe,
Could you please tell me what IOS version you use in your 2610 BB Routers?
Labs Vol 3.9 & 3.10 use encapsulation dot1q on the Ethernet interfaces on
these Routers.
But so far I have NOT found an IOS version that allows do1Q on an Ethernet
interface.
I thoughy you could only do that with a Fast Ethernet interface.
Could you please let me know?
Thank you!
--- On Wed, 7/1/09, Joe Astorino <[email protected]> wrote:
From: Joe Astorino <[email protected]>
Subject: Re: [OSL | CCIE_RS] Question about
topology
To: "'Terry Vinson'" <[email protected]>, [email protected]
Date: Wednesday, July 1, 2009, 2:06 PM
Hey Terry,
Well, in our topology we have Cat2-Cat4 as 3560 like you said. I would have
to go through every lab and really see if there are any situations where you
HAVE to have a 3560 to do something on a particular switch.
Regards,
Joe Astorino
CCIE #24347 (R&S)
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
-----Original Message-----
From: [email protected]
[mailto:[email protected]]
On Behalf Of Terry Vinson
Sent: Wednesday, July 01, 2009 1:57 PM
To: [email protected]
Subject: [OSL | CCIE_RS] Question about topology
Hi Guys,
I use dynamips and 4 real switches in my personal rack. I have 2 3550's
and 2 3560's. I see that the Version 11 Workbook 1 topology has 3
3560's, well that's not happening financially over here for quite
sometime (if ever if my wife is to be believed). My question is where
should I use the 2 3560's to get the best coverage of capabilities? I
have to assume it will make a difference on some of the Switching labs,
but I don't see a huge impact on the layer 3 stuff other than IPv6.
Thanks,
Terry
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.0/2210 - Release Date:
07/01/09
05:53:00
