On Feb 14, 2019, at 1:45 PM, Sterling Jacobson <sterl...@avative.net
<mailto:sterl...@avative.net>> wrote:
Well that’s a horrible review.
Maybe I won’t use their products…
*From:*AF <af-boun...@af.afmug.com
<mailto:af-boun...@af.afmug.com>>*On Behalf Of*Ryan Hill
*Sent:*Thursday, February 14, 2019 11:17 AM
*To:*AnimalFarm Microwave Users Group <af@af.afmug.com
<mailto:af@af.afmug.com>>
*Subject:*Re: [AFMUG] Looking for PS and POE
Buyer beware...
We had horrendous issues with Texas Wifi products. After Cambium
stoped producing th PhiHong POEs we found Texas Wifi and they made a
comparable solution that we purchased. Over time every single one of
them failed. We lost count above 500, and needless to say we moved on
and went with the Cambium POE.
<image001.png>
/ Ryan Hill /
Operations Manager
*Amplex I**nternet*
(419)837-5015 Ext 1047
www.amplex.net <http://www.amplex.net/>
On Feb 14, 2019, at 1:03 PM, Sterling Jacobson
<sterl...@avative.net <mailto:sterl...@avative.net>> wrote:
33W using this version:
https://mikrotik.com/product/rb4011igs_rm
*From:*AF <af-boun...@af.afmug.com
<mailto:af-boun...@af.afmug.com>>*On Behalf Of*Josh Luthman
*Sent:*Thursday, February 14, 2019 10:49 AM
*To:*AnimalFarm Microwave Users Group <af@af.afmug.com
<mailto:af@af.afmug.com>>
*Subject:*Re: [AFMUG] Looking for PS and POE
Max power is 23 watts.
https://mikrotik.com/product/rb4011igs_5hacq2hnd_in
Assuming you're not powering anything besides the board you
shouldn't have much to worry about.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Feb 14, 2019 at 12:05 PM Sterling Jacobson
<sterl...@avative.net <mailto:sterl...@avative.net>> wrote:
Just found out about POE Texas, will be ordering some of their
stuff soon.
I’m interested in powering mikrotik RB4011 so I guess a 1A
might cover it, but like to be able to give more power with 24v.
*From:*AF <af-boun...@af.afmug.com
<mailto:af-boun...@af.afmug.com>>*On Behalf Of*Colin Stanners
*Sent:*Wednesday, February 13, 2019 8:39 PM
*To:*AnimalFarm Microwave Users Group <af@af.afmug.com
<mailto:af@af.afmug.com>>
*Subject:*Re: [AFMUG] Looking for PS and POE
He may be doing similar to what our ham radio HSMM group did
for some cost-effective setups, one (or 2 redundant, using a
diode device) 24V supply feeding a 5$ standard 1:4 to 1:8 DC
splitter (used for security camera systems) then to PoE
injectors. We're doing that for Ubnt/MT radios using 4$
100mbit offbrand injectors and it's nice way to have something
small and DC, with some redundancy, for cheap.
On Wed, Feb 13, 2019, 9:24 PM Ken Hohhof <af...@kwisp.com
<mailto:af...@kwisp.com>wrote:
What are you powering? 24V at 1.8A is way more than most
CPE, but most gigabit APs and backhauls want 48V not 24V.
Also not sure why you want a separate wall wart and a
round DC power plug rather than injector and power supply
in one with an AC cord.
There’s also the question of whether you’re looking for
passive or 802.3af with signature detection and a status
light.
But you’d think between Tycon and POE Texas you could find
whatever you want.
*From:*AF <af-boun...@af.afmug.com
<mailto:af-boun...@af.afmug.com>>*On Behalf Of*Colin Stanners
*Sent:*Wednesday, February 13, 2019 8:45 PM
*To:*AnimalFarm Microwave Users Group <af@af.afmug.com
<mailto:af@af.afmug.com>>
*Subject:*Re: [AFMUG] Looking for PS and POE
For gigabit PoE injector it all depends on the pinout that
you need - what pinout/radio do you want to power? Why do
the manufacturer solutions not work?
For PS, do you need plastic-case "consumer" PSU or is a
semi-open-frame OK?
On Wed, Feb 13, 2019, 7:29 PM Sterling Jacobson
<sterl...@avative.net <mailto:sterl...@avative.net>wrote:
I’m looking for a new/good supplier of a Gigabit POE
injector that has the female DC receptacle on it and
is known to work well.
Also looking for good PS too, 24v around 1.8A would be
nice, again with the round DC male end on about 6’
cord from a wall wart is fine.
For some reason can’t seem to find a good vendor of
either of those items, that are known good over time
and decent price.
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
