Need it for single POE, any other suggestions besides Texas WISP? From: AF <af-boun...@af.afmug.com> On Behalf Of Jesse DuPont Sent: Wednesday, February 13, 2019 8:43 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Looking for PS and POE
For Mode A/Mode B stuff (UBNT, Cambium, Mikrotik), I prefer these. They have a ground wire which provides grounding for the cable shielding when using shielded connectors. (Not sure about all of Cambium's gear, but Cambium ePMP 1000 are polarity insensitive because they use bridge rectifiers on the input). https://www.amazon.com/dp/B00FYF8IKK/ref=cm_sw_em_r_mt_dp_U_olozCb2Q62CAF Jesse DuPont Network Architect email: jesse.dup...@celeritycorp.net<mailto:jesse.dup...@celeritycorp.net> Celerity Networks LLC Celerity Broadband LLC Like us! facebook.com/celeritynetworksllc [cid:image001.png@01D4C466.2F6C9320] Like us! facebook.com/celeritybroadband [X] On 2/13/19 6:27 PM, Sterling Jacobson wrote: I'm looking for a new/good supplier of a Gigabit POE injector that has the female DC receptacle on it and is known to work well. Also looking for good PS too, 24v around 1.8A would be nice, again with the round DC male end on about 6' cord from a wall wart is fine. For some reason can't seem to find a good vendor of either of those items, that are known good over time and decent price.
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
