Buyer beware...
We had horrendous issues with Texas Wifi products. After Cambium stoped
producing th PhiHong POEs we found Texas Wifi and they made a comparable
solution that we purchased. Over time every single one of them failed. We
lost count above 500, and needless to say we moved on and went with the Cambium
POE.
Ryan Hill
Operations Manager
Amplex Internet
(419)837-5015 Ext 1047
www.amplex.net <http://www.amplex.net/>
> On Feb 14, 2019, at 1:03 PM, Sterling Jacobson <sterl...@avative.net> wrote:
>
> 33W using this version:
>
> https://mikrotik.com/product/rb4011igs_rm
> <https://mikrotik.com/product/rb4011igs_rm>
>
> From: AF <af-boun...@af.afmug.com> On Behalf Of Josh Luthman
> Sent: Thursday, February 14, 2019 10:49 AM
> To: AnimalFarm Microwave Users Group <af@af.afmug.com>
> Subject: Re: [AFMUG] Looking for PS and POE
>
> Max power is 23 watts. https://mikrotik.com/product/rb4011igs_5hacq2hnd_in
> <https://mikrotik.com/product/rb4011igs_5hacq2hnd_in>
>
> Assuming you're not powering anything besides the board you shouldn't have
> much to worry about.
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Thu, Feb 14, 2019 at 12:05 PM Sterling Jacobson <sterl...@avative.net
> <mailto:sterl...@avative.net>> wrote:
> Just found out about POE Texas, will be ordering some of their stuff soon.
>
> I’m interested in powering mikrotik RB4011 so I guess a 1A might cover it,
> but like to be able to give more power with 24v.
>
> From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com>> On Behalf
> Of Colin Stanners
> Sent: Wednesday, February 13, 2019 8:39 PM
> To: AnimalFarm Microwave Users Group <af@af.afmug.com
> <mailto:af@af.afmug.com>>
> Subject: Re: [AFMUG] Looking for PS and POE
>
> He may be doing similar to what our ham radio HSMM group did for some
> cost-effective setups, one (or 2 redundant, using a diode device) 24V supply
> feeding a 5$ standard 1:4 to 1:8 DC splitter (used for security camera
> systems) then to PoE injectors. We're doing that for Ubnt/MT radios using 4$
> 100mbit offbrand injectors and it's nice way to have something small and DC,
> with some redundancy, for cheap.
>
>
> On Wed, Feb 13, 2019, 9:24 PM Ken Hohhof <af...@kwisp.com
> <mailto:af...@kwisp.com> wrote:
> What are you powering? 24V at 1.8A is way more than most CPE, but most
> gigabit APs and backhauls want 48V not 24V.
>
> Also not sure why you want a separate wall wart and a round DC power plug
> rather than injector and power supply in one with an AC cord.
>
> There’s also the question of whether you’re looking for passive or 802.3af
> with signature detection and a status light.
>
> But you’d think between Tycon and POE Texas you could find whatever you want.
>
>
> From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com>> On Behalf
> Of Colin Stanners
> Sent: Wednesday, February 13, 2019 8:45 PM
> To: AnimalFarm Microwave Users Group <af@af.afmug.com
> <mailto:af@af.afmug.com>>
> Subject: Re: [AFMUG] Looking for PS and POE
>
> For gigabit PoE injector it all depends on the pinout that you need - what
> pinout/radio do you want to power? Why do the manufacturer solutions not work?
>
> For PS, do you need plastic-case "consumer" PSU or is a semi-open-frame OK?
>
>
>
> On Wed, Feb 13, 2019, 7:29 PM Sterling Jacobson <sterl...@avative.net
> <mailto:sterl...@avative.net> wrote:
> I’m looking for a new/good supplier of a Gigabit POE injector that has the
> female DC receptacle on it and is known to work well.
>
> Also looking for good PS too, 24v around 1.8A would be nice, again with the
> round DC male end on about 6’ cord from a wall wart is fine.
>
> For some reason can’t seem to find a good vendor of either of those items,
> that are known good over time and decent price.
>
>
> --
> AF mailing list
> AF@af.afmug.com <mailto:AF@af.afmug.com>
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
> --
> AF mailing list
> AF@af.afmug.com <mailto:AF@af.afmug.com>
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
> --
> AF mailing list
> AF@af.afmug.com <mailto:AF@af.afmug.com>
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com>--
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
