He may be doing similar to what our ham radio HSMM group did for some
cost-effective setups, one (or 2 redundant, using a diode device) 24V
supply feeding a 5$ standard 1:4 to 1:8 DC splitter (used for security
camera systems) then to PoE injectors. We're doing that for Ubnt/MT radios
using 4$ 100mbit offbrand injectors and it's nice way to have something
small and DC, with some redundancy, for cheap.


On Wed, Feb 13, 2019, 9:24 PM Ken Hohhof <af...@kwisp.com wrote:

> What are you powering?  24V at 1.8A is way more than most CPE, but most
> gigabit APs and backhauls want 48V not 24V.
>
>
>
> Also not sure why you want a separate wall wart and a round DC power plug
> rather than injector and power supply in one with an AC cord.
>
>
>
> There’s also the question of whether you’re looking for passive or 802.3af
> with signature detection and a status light.
>
>
>
> But you’d think between Tycon and POE Texas you could find whatever you
> want.
>
>
>
>
>
> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Colin Stanners
> *Sent:* Wednesday, February 13, 2019 8:45 PM
> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com>
> *Subject:* Re: [AFMUG] Looking for PS and POE
>
>
>
> For gigabit PoE injector it all depends on the pinout that you need - what
> pinout/radio do you want to power? Why do the manufacturer solutions not
> work?
>
>
>
> For PS, do you need plastic-case "consumer" PSU or is a semi-open-frame OK?
>
>
>
>
>
> On Wed, Feb 13, 2019, 7:29 PM Sterling Jacobson <sterl...@avative.net
> wrote:
>
> I’m looking for a new/good supplier of a Gigabit POE injector that has the
> female DC receptacle on it and is known to work well.
>
>
>
> Also looking for good PS too, 24v around 1.8A would be nice, again with
> the round DC male end on about 6’ cord from a wall wart is fine.
>
>
>
> For some reason can’t seem to find a good vendor of either of those items,
> that are known good over time and decent price.
>
>
>
>
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to