I imagine it is to power froth gear from the inside of the house. Sent from my iPhone
> On Feb 13, 2019, at 8:42 PM, Jesse DuPont <jesse.dup...@celeritycorp.net> > wrote: > > For Mode A/Mode B stuff (UBNT, Cambium, Mikrotik), I prefer these. They have > a ground wire which provides grounding for the cable shielding when using > shielded connectors. (Not sure about all of Cambium's gear, but Cambium ePMP > 1000 are polarity insensitive because they use bridge rectifiers on the > input). > > https://www.amazon.com/dp/B00FYF8IKK/ref=cm_sw_em_r_mt_dp_U_olozCb2Q62CAF > > > Jesse DuPont > > Network Architect > email: jesse.dup...@celeritycorp.net > Celerity Networks LLC > > Celerity Broadband LLC > Like us! facebook.com/celeritynetworksllc > > <celeritynetworks-GIF.gif> > Like us! facebook.com/celeritybroadband > > >> On 2/13/19 6:27 PM, Sterling Jacobson wrote: >> I’m looking for a new/good supplier of a Gigabit POE injector that has the >> female DC receptacle on it and is known to work well. >> >> Also looking for good PS too, 24v around 1.8A would be nice, again with the >> round DC male end on about 6’ cord from a wall wart is fine. >> >> For some reason can’t seem to find a good vendor of either of those items, >> that are known good over time and decent price. >> >> >> >> > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
