Thank you for the response. Sir, both of my ports are "Gigabit Ethernet," so I was hoping two N200 might respond on ping in the windows command window since I have changed the IP of both N-200 to "192.168.10.1" and "192.168.10.2". Is there any way to connect multiple N-series in windows with my setting or a way to resolve the issue?
If two USRP are recognized by PC, the rest is easy to use in MATLAB. On Mon, Apr 3, 2023 at 12:26 AM Marcus D. Leech <patchvonbr...@gmail.com> wrote: > On 02/04/2023 13:34, Arhum Ahmad wrote: > > Respected sir, > > > > I am trying to connect multiple USRP N200 simultaneously to the same > > system to use in MATLAB. However, It is not recognized by the system. > > My PC has 2 ethernet ports (10 and 5 Gbit). N-200 connects via a > > 10Gbit port but not by 5 Gbit. I have changed the IP of N-200, but it > > doesn't work. I have tried to use a router to make a local LAN to > > connect the PC to 2 N-200, but it did not work either. Is there any > > specific way to connect multiple N-200 in the PC and use it in MATLAB > > for simultaneous operation?It will be very helpful for my experiment. > The N200 ONLY supports 1GBit connections. It doesn't autoconfigure. It > MUST use a standard 1GIGe connection. > > Each N200 will need to have a unique IP address. Your network ports > need to be configured accordingly. > > I'm doubting that your report of a successful connection to a *10Gbit* port > is actually correct. It must be a *1GiGe* port. > > I can't help with MATLAB. And indeed, there are only a handful of > MATLAB users on the usrp-users mailing list. > > > > -- *Thanks and Regards* *Arhum Ahmad* Ph.D. Scholar, Electrical Engineering Department, IIT Ropar +91- <+91-7015802356>7974897279 | arhum.19eez0...@iitrpr.ac.in <2016eez0...@iitrpr.ac.in> Lab No. 323, Communication Research Lab, J.C.Bose Building -- **CONFIDENTIALITY NOTICE: The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibited.* *
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
