On 02/04/2023 13:34, Arhum Ahmad wrote:
Respected sir,
I am trying to connect multiple USRP N200 simultaneously to the same
system to use in MATLAB. However, It is not recognized by the system.
My PC has 2 ethernet ports (10 and 5 Gbit). N-200 connects via a
10Gbit port but not by 5 Gbit. I have changed the IP of N-200, but it
doesn't work. I have tried to use a router to make a local LAN to
connect the PC to 2 N-200, but it did not work either. Is there any
specific way to connect multiple N-200 in the PC and use it in MATLAB
for simultaneous operation?It will be very helpful for my experiment.
The N200 ONLY supports 1GBit connections. It doesn't autoconfigure. It
MUST use a standard 1GIGe connection.
Each N200 will need to have a unique IP address. Your network ports
need to be configured accordingly.
I'm doubting that your report of a successful connection to a *10Gbit* port
is actually correct. It must be a *1GiGe* port.
I can't help with MATLAB. And indeed, there are only a handful of
MATLAB users on the usrp-users mailing list.
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
