usrp-users  

Messages by Thread

• [USRP-users] IP locked for X440 RFNoC build Eugene Grayver
  • [USRP-users] Re: IP locked for X440 RFNoC build Eugene Grayver
• [USRP-users] X440 - Phase alignment between two USRPs Eugene Grayver
  • [USRP-users] Re: X440 - Phase alignment between two USRPs Eugene Grayver
  • [USRP-users] Re: X440 - Phase alignment between two USRPs Chris Rogers
  • [USRP-users] Re: X440 - Phase alignment between two USRPs Michael Dickens
• [USRP-users] X440: Could not find appropriate gain for performing ADC self cal Eugene Grayver
  • [USRP-users] Re: X440: Could not find appropriate gain for performing ADC self cal Chris Rogers
  • [USRP-users] Re: [EXTERNAL] Re: X440: Could not find appropriate gain for performing ADC self cal Eugene Grayver
  • [USRP-users] Re: X440: Could not find appropriate gain for performing ADC self cal Anderseck, Martin via USRP-users
• [USRP-users] Bad channel on X440? Eugene Grayver
• [USRP-users] Save-the-Date: NEWSDR 2026 at WPI on June 4-5 Neel Pandeya
  • [USRP-users] Re: Save-the-Date: NEWSDR 2026 at WPI on June 4-5 Neel Pandeya
• [USRP-users] Suitable PC hardware for X440 Emanuel.Staudinger--- via USRP-users
  • [USRP-users] Re: Suitable PC hardware for X440 Ryan Wolfarth
  • [USRP-users] Re: Suitable PC hardware for X440 Marcus D. Leech
• [USRP-users] Sample Rate Forcing to 184.32 MSps on USRP-2952R (X310) for 122.88 MSps Request and Buffer Overflow issue P S Vishwanath Koushik
  • [USRP-users] Re: Sample Rate Forcing to 184.32 MSps on USRP-2952R (X310) for 122.88 MSps Request and Buffer Overflow issue Martin Braun
  • [USRP-users] Re: Sample Rate Forcing to 184.32 MSps on USRP-2952R (X310) for 122.88 MSps Request and Buffer Overflow issue P S Vishwanath Koushik
  • [USRP-users] Re: Sample Rate Forcing to 184.32 MSps on USRP-2952R (X310) for 122.88 MSps Request and Buffer Overflow issue Martin Braun
• [USRP-users] X410/ZBX Session-to-Session Phase Coherence with multi_usrp API Chris Wozny
  • [USRP-users] Re: X410/ZBX Session-to-Session Phase Coherence with multi_usrp API JOE QUATTROCHI via USRP-users
  • [USRP-users] Re: X410/ZBX Session-to-Session Phase Coherence with multi_usrp API Martin Braun
  • [USRP-users] Re: X410/ZBX Session-to-Session Phase Coherence with multi_usrp API Kaya, Altug
  • [USRP-users] Re: X410/ZBX Session-to-Session Phase Coherence with multi_usrp API Kaya, Altug
• [USRP-users] IF Filter Selection in X410/UHD Kaya, Altug
• [USRP-users] B210 GPIO SPI support using UHD Python API page heller
  • [USRP-users] Re: B210 GPIO SPI support using UHD Python API Martin Braun
• [USRP-users] Re: NI USRP 2950 FPGA Image pav . vieira
• [USRP-users] NI USRP 2950 FPGA Image Cornel Balint via USRP-users
  • [USRP-users] Re: NI USRP 2950 FPGA Image JOE QUATTROCHI via USRP-users
• [USRP-users] X440 Dual DDC per channel Eugene Grayver
  • [USRP-users] Re: X440 Dual DDC per channel Rob Kossler via USRP-users
  • [USRP-users] Re: X440 Dual DDC per channel Martin Braun
• [USRP-users] DUC set_freq() function Tommy Tsui
• [USRP-users] error when loading a bitfile with more than 8 eps Daniel Ozer
  • [USRP-users] Re: error when loading a bitfile with more than 8 eps Daniel Ozer
  • [USRP-users] Re: error when loading a bitfile with more than 8 eps Martin Braun
• [USRP-users] TX DRAM buffer Eugene Grayver
  • [USRP-users] Re: TX DRAM buffer Rob Kossler via USRP-users
  • [USRP-users] Re: [EXTERNAL] Re: TX DRAM buffer Eugene Grayver
  • [USRP-users] Re: [EXTERNAL] Re: TX DRAM buffer Rob Kossler via USRP-users
  • [USRP-users] Re: [EXTERNAL] Re: TX DRAM buffer Eugene Grayver
  • [USRP-users] Re: [EXTERNAL] Re: TX DRAM buffer Martin Braun
  • [USRP-users] Re: [EXTERNAL] Re: TX DRAM buffer Martin Braun
  • [USRP-users] Re: [EXTERNAL] Re: TX DRAM buffer Rob Kossler via USRP-users
  • [USRP-users] Re: [EXTERNAL] Re: TX DRAM buffer Martin Braun
• [USRP-users] How to disconnect streamers on RFNoC graph Yang, Nan via USRP-users
  • [USRP-users] Re: How to disconnect streamers on RFNoC graph Rob Kossler via USRP-users
  • [USRP-users] Re: [EXTERNAL] Re: How to disconnect streamers on RFNoC graph Yang, Nan via USRP-users
  • [USRP-users] Re: [EXTERNAL] Re: How to disconnect streamers on RFNoC graph Martin Braun
• [USRP-users] Re: Split x410 rx channels to separate hosts carmixdev
• [USRP-users] Split x410 rx channels to separate hosts carmixdev
  • [USRP-users] Re: Split x410 rx channels to separate hosts Anderseck, Martin via USRP-users
• [USRP-users] Re: GPSDO Lock slow on X310 carmixdev
  • [USRP-users] Re: GPSDO Lock slow on X310 Martin Braun
• [USRP-users] GPSDO Lock slow on X310 carmixdev
  • [USRP-users] Re: GPSDO Lock slow on X310 Marcus D. Leech
• [USRP-users] USRP N210 with LFTX / LFRX supported LabVIEW version Ravi Paswan via USRP-users
  • [USRP-users] Re: USRP N210 with LFTX / LFRX supported LabVIEW version Martin Braun
• [USRP-users] GPIO Support for RFNoC Blocks Martin Braun
• [USRP-users] Re: RFNOC Front Panel GPIO joerg.hofrichter--- via USRP-users
  • [USRP-users] Re: RFNOC Front Panel GPIO joerg.hofrichter--- via USRP-users
• [USRP-users] RFNOC Front Panel GPIO Jimenez Vargas, Juan - 0994 - MITLL
• [USRP-users] USRP-2952R (X310) PCIe interface issue with UHD (built from OAI source)on Ubuntu 22.04 P S Vishwanath Koushik
  • [USRP-users] Re: USRP-2952R (X310) PCIe interface issue with UHD (built from OAI source)on Ubuntu 22.04 Martin Braun
  • [USRP-users] Re: USRP-2952R (X310) PCIe interface issue with UHD (built from OAI source)on Ubuntu 22.04 Martin Braun
  • [USRP-users] Re: USRP-2952R (X310) PCIe interface issue with UHD (built from OAI source)on Ubuntu 22.04 Philipp Niedermayer
  • [USRP-users] Re: USRP-2952R (X310) PCIe interface issue with UHD (built from OAI source)on Ubuntu 22.04 Martin Braun
• [USRP-users] NI-RIO error using USRP X310 over MXI with PCIe-8371 adapter on Ubuntu 24.04 LTS Philipp Niedermayer
  • [USRP-users] Re: [EXTERNAL] NI-RIO error using USRP X310 over MXI with PCIe-8371 adapter on Ubuntu 24.04 LTS Amsel, Lars via USRP-users
  • [USRP-users] Re: NI-RIO error using USRP X310 over MXI with PCIe-8371 adapter on Ubuntu 24.04 LTS Martin Braun
• [USRP-users] Using USRP B206mini with Octoclock 10MHz+PPS David Raeman via USRP-users
  • [USRP-users] Re: Using USRP B206mini with Octoclock 10MHz+PPS Marcus D. Leech
  • [USRP-users] Re: Using USRP B206mini with Octoclock 10MHz+PPS Martin Braun
  • [USRP-users] Re: Using USRP B206mini with Octoclock 10MHz+PPS David Raeman via USRP-users
  • [USRP-users] Re: Using USRP B206mini with Octoclock 10MHz+PPS walter
• [USRP-users] Re: X440 X4_400 with DDC not working‏‏ niels.steffen.garibaldi--- via USRP-users
  • [USRP-users] Re: X440 X4_400 with DDC not working‏‏ Daniel Ozer
  • [USRP-users] Re: X440 X4_400 with DDC not working‏‏ niels.steffen.garibaldi--- via USRP-users
  • [USRP-users] Re: X440 X4_400 with DDC not working‏‏ Rob Kossler via USRP-users
• [USRP-users] X440 X4_400 with DDC not working‏‏ Daniel Ozer
• [USRP-users] Re: [UHD 4.8 / X410] YAML inheritance error when adding custom RFNoC block + need updated tutorial joerg.hofrichter--- via USRP-users
• [USRP-users] Using extension interface with RFNoC API Rob Kossler via USRP-users
  • [USRP-users] Re: Using extension interface with RFNoC API Anderseck, Martin via USRP-users
  • [USRP-users] Re: Using extension interface with RFNoC API Rob Kossler via USRP-users
• [USRP-users] Extensions & antenna mixin bug? Rob Kossler via USRP-users
• [USRP-users] Question about RFNoC Radio/DDC packet timing and spacing adri96roll
  • [USRP-users] Re: Question about RFNoC Radio/DDC packet timing and spacing Martin Braun
• [USRP-users] Re: N320 SMA model number jason
  • [USRP-users] Re: N320 SMA model number Lindstedt, Ralf
• [USRP-users] Re: importing ip cores generated by Simulink Peter Gu via USRP-users
• [USRP-users] IP locked in UHD 4.9 Peter Gu via USRP-users
• [USRP-users] N320 SMA model number jason
• [USRP-users] [UHD 4.8 / X410] YAML inheritance error when adding custom RFNoC block + need updated tutorial yunxi.chen--- via USRP-users
• [USRP-users] Deadlock in OOT RFNoC Block ryan . a . wolfarth
• [USRP-users] X410 RFNoC Image Builder Cannot Find x410_radio_base.yml During Inheritance yunxi.chen--- via USRP-users
• [USRP-users] Re: [help] Inquiry about DSP Resource Optimization for 5G PSS Detector RFNoC Block on X410 Martin Braun
• [USRP-users] Half duplex with USRP B2xx and GNU Radio Daniel Estévez
  • [USRP-users] Re: Half duplex with USRP B2xx and GNU Radio Marcus Müller
  • [USRP-users] Re: Half duplex with USRP B2xx and GNU Radio Martin Braun
  • [USRP-users] Re: Half duplex with USRP B2xx and GNU Radio Daniel Estévez
  • [USRP-users] Re: Half duplex with USRP B2xx and GNU Radio David Taylor (manx.net) via USRP-users
  • [USRP-users] Re: Half duplex with USRP B2xx and GNU Radio Ian Buckley
• [USRP-users] Re: USRP X410: sampling phase alignment - phase calibration atato
• [USRP-users] Accessing DDR within OOT RFNoC Block ryan . a . wolfarth
  • [USRP-users] Re: Accessing DDR within OOT RFNoC Block Brian Padalino
  • [USRP-users] Re: Accessing DDR within OOT RFNoC Block Martin Braun
• [USRP-users] USRP Integration with Xilinx/Vivado Ravi Paswan via USRP-users
  • [USRP-users] Re: USRP Integration with Xilinx/Vivado Martin Braun
• [USRP-users] Re: Accessing DDR within OOT RFNoC Block ryan . a . wolfarth
  • [USRP-users] Re: Accessing DDR within OOT RFNoC Block Martin Braun
  • [USRP-users] Re: Accessing DDR within OOT RFNoC Block Martin Braun
  • [USRP-users] Re: Accessing DDR within OOT RFNoC Block ryan . a . wolfarth
  • [USRP-users] Re: Accessing DDR within OOT RFNoC Block ryan . a . wolfarth
• [USRP-users] USRP X310 not transmitting Daniel Mayer
  • [USRP-users] Re: USRP X310 not transmitting Brian Padalino
  • [USRP-users] Re: USRP X310 not transmitting Daniel Mayer
  • [USRP-users] Re: USRP X310 not transmitting Rob Kossler via USRP-users
• [USRP-users] How to know streaming rate in arbitrary graph Rob Kossler via USRP-users
  • [USRP-users] Re: How to know streaming rate in arbitrary graph Martin Braun
  • [USRP-users] Re: How to know streaming rate in arbitrary graph Rob Kossler via USRP-users
• [USRP-users] Re: Getting Started RFNoC Peter Gu via USRP-users
  • [USRP-users] Re: Getting Started RFNoC Martin Braun
  • [USRP-users] Re: Getting Started RFNoC Peter Gu via USRP-users
  • [USRP-users] Re: Getting Started RFNoC Martin Braun
  • [USRP-users] Re: Getting Started RFNoC Peter Gu via USRP-users
  • [USRP-users] Re: Getting Started RFNoC Marcus Müller
• [USRP-users] Re: X440 Rebuilding boot.bin perper
  • [USRP-users] Re: X440 Rebuilding boot.bin perper
• [USRP-users] Getting Started RFNoC Peter Gu via USRP-users
  • [USRP-users] Re: Getting Started RFNoC Martin Braun
• [USRP-users] X440 Rebuilding boot.bin Brian Padalino
• [USRP-users] Rx antenna Tx/Rx with full duplex streaming state Rob Kossler via USRP-users
  • [USRP-users] Re: Rx antenna Tx/Rx with full duplex streaming state Anderseck, Martin via USRP-users
  • [USRP-users] Re: Rx antenna Tx/Rx with full duplex streaming state Rob Kossler via USRP-users
  • [USRP-users] Re: Rx antenna Tx/Rx with full duplex streaming state Martin Braun
• [USRP-users] Re: How to pin a specific UHD version across machines/devcontainers? ardelgado
  • [USRP-users] Re: How to pin a specific UHD version across machines/devcontainers? joerg.hofrichter--- via USRP-users
  • [USRP-users] Re: How to pin a specific UHD version across machines/devcontainers? ardelgado
  • [USRP-users] Re: How to pin a specific UHD version across machines/devcontainers? Martin Braun
• [USRP-users] How to pin a specific UHD version across machines/devcontainers? ardelgado
  • [USRP-users] Re: How to pin a specific UHD version across machines/devcontainers? Martin Braun
• [USRP-users] [GNURadio] Announcing GNURadio 3 binary installers with UHD 4.9 marian.koop--- via USRP-users
• [USRP-users] USRP E320 sporadically not autobooting David Raeman via USRP-users
  • [USRP-users] Re: USRP E320 sporadically not autobooting Martin Braun
• [USRP-users] usrp b210 triggering Navid Akbari via USRP-users
  • [USRP-users] Re: usrp b210 triggering Marcus D. Leech
• [USRP-users] [UHD] 4.9.0.0 Release Announcement marian.koop--- via USRP-users
• [USRP-users] Visualization of USRP Signals in C++ Application – Best Practices? Ravi Paswan via USRP-users
  • [USRP-users] Re: Visualization of USRP Signals in C++ Application – Best Practices? Marcus D. Leech
  • [USRP-users] Re: Visualization of USRP Signals in C++ Application – Best Practices? Philipp Niedermayer
• [USRP-users] Out-of-tree RFNoC modules on github Martin Braun
• [USRP-users] Re: PPS signal OctoClock-G dennis . joosens
  • [USRP-users] Re: PPS signal OctoClock-G John Ackermann N8UR via USRP-users
  • [USRP-users] Re: PPS signal OctoClock-G Marcus Müller
  • [USRP-users] Re: PPS signal OctoClock-G John Ackermann N8UR via USRP-users
• [USRP-users] Pymodule_library make install Target Specifics David
  • [USRP-users] Re: Pymodule_library make install Target Specifics Martin Braun
• [USRP-users] Error on USRP N320: EnvironmentError: IOError: socket closed Eugene Grayver
• [USRP-users] Re: Error with ettus x440: Failure to create rfnoc_graph. Rubén Serrano via USRP-users
  • [USRP-users] Re: Error with ettus x440: Failure to create rfnoc_graph. Anderseck, Martin via USRP-users
  • [USRP-users] Re: Error with ettus x440: Failure to create rfnoc_graph. Rubén Serrano via USRP-users
• [USRP-users] Re: tlast in the CHDR packet niels.steffen.garibaldi--- via USRP-users
  • [USRP-users] Re: tlast in the CHDR packet Jons
  • [USRP-users] Re: tlast in the CHDR packet niels.steffen.garibaldi--- via USRP-users
  • [USRP-users] Re: tlast in the CHDR packet Jons
• [USRP-users] tlast in the CHDR packet Jons
• [USRP-users] Error with ettus x440: Failure to create rfnoc_graph. Rubén Serrano via USRP-users
  • [USRP-users] Re: Error with ettus x440: Failure to create rfnoc_graph. Anderseck, Martin via USRP-users
• [USRP-users] Re: Overflow rx_streamer issue niels.steffen.garibaldi--- via USRP-users
• [USRP-users] Re: Replay Block Command Rate Bottleneck at High PRF niels.steffen.garibaldi--- via USRP-users
  • [USRP-users] Re: Replay Block Command Rate Bottleneck at High PRF Brian Padalino
• [USRP-users] Replay Block Command Rate Bottleneck at High PRF Arthur Gerst via USRP-users
  • [USRP-users] Re: Replay Block Command Rate Bottleneck at High PRF Brian Padalino
• [USRP-users] Ettus N210 has become unreachable through the network. shapkiquarry
  • [USRP-users] Re: Ettus N210 has become unreachable through the network. Marcus D. Leech
• [USRP-users] PPS signal OctoClock-G dennis . joosens
  • [USRP-users] Re: PPS signal OctoClock-G John Ackermann N8UR via USRP-users
• [USRP-users] X440 eth_100g PAUSE_EN and Dropped Packet Counts Brian Padalino
  • [USRP-users] Re: X440 eth_100g PAUSE_EN and Dropped Packet Counts Nikos Balkanas
  • [USRP-users] Re: X440 eth_100g PAUSE_EN and Dropped Packet Counts Brian Padalino
  • [USRP-users] Re: X440 eth_100g PAUSE_EN and Dropped Packet Counts Nikos Balkanas
  • [USRP-users] Re: X440 eth_100g PAUSE_EN and Dropped Packet Counts Brian Padalino
  • [USRP-users] Re: X440 eth_100g PAUSE_EN and Dropped Packet Counts Wade Fife
  • [USRP-users] Re: X440 eth_100g PAUSE_EN and Dropped Packet Counts Brian Padalino
  • [USRP-users] Re: X440 eth_100g PAUSE_EN and Dropped Packet Counts Brian Padalino
• [USRP-users] rfnoc block gain option IN_TREE_IP 285270
• [USRP-users] USRP B210 10 MHz Reference Input - Minimum Power Kazakoff, Peter (ASC/CSA)
  • [USRP-users] Re: USRP B210 10 MHz Reference Input - Minimum Power Marcus D. Leech
• [USRP-users] N3xx calibrator for Power Ref API Rob Kossler via USRP-users
  • [USRP-users] Re: N3xx calibrator for Power Ref API Martin Braun
• [USRP-users] N321 output power too low Eugene Grayver
  • [USRP-users] Re: N321 output power too low Nikos Balkanas
  • [USRP-users] Re: N321 output power too low Marcus D. Leech
• [USRP-users] Connecting an X410 to a 10 Gb SFP+ port Mann, John - 0662 - MITLL
  • [USRP-users] Re: Connecting an X410 to a 10 Gb SFP+ port Wade Fife
• [USRP-users] Re: "radio_tx_stb" input on radio_tx_core niels.steffen.garibaldi--- via USRP-users
  • [USRP-users] Re: [EXTERNAL]Re: "radio_tx_stb" input on radio_tx_core Kevin Williams
• [USRP-users] Non-Stationary TDOA Behavior using PCM Signals nirkicatal1

• Earlier messages