Thanks, Rob. I always appreciate when you "chime in". Hopefully, someone can try the uhd "test_timed_commands" example in 4.1 to help confirm whether or not it's a problem with something on my end or with UHD. Marcus already confirmed its working for him with an N310 and UHD 3.15.
Thanks, Jim ________________________________ From: Rob Kossler <rkoss...@nd.edu> Sent: Wednesday, February 2, 2022 3:26 PM To: Jim Palladino <j...@gardettoengineering.com> Cc: Marcus D. Leech <patchvonbr...@gmail.com>; usrp-users@lists.ettus.com <usrp-users@lists.ettus.com> Subject: Re: [USRP-users] Re: Timed Commands Not Working Hi Jim, This sounds like a pretty big issue. I haven't chimed in because I couldn't say for sure if timed commands were working for me or not in UHD 4.1. I am using N321s with shared LO, so the normal commands I use for setting frequency aren't critical (from a timed command perspective) except for how the DDC/DUC might be handling them. In any case, once you find out the issue, could you please share the solution here. If I get a chance, I will try this on some of my devices. Rob On Wed, Feb 2, 2022 at 12:22 PM Jim Palladino <j...@gardettoengineering.com<mailto:j...@gardettoengineering.com>> wrote: Just to add one more data point, I just ran test_timed_commands on a different computer connected to an X310 -- still UHD 4.1. I have the same problem with that device where it looks like timed commands are not working right. Thanks, Jim ________________________________ From: Jim Palladino <j...@gardettoengineering.com<mailto:j...@gardettoengineering.com>> Sent: Wednesday, February 2, 2022 10:44 AM To: Marcus D. Leech <patchvonbr...@gmail.com<mailto:patchvonbr...@gmail.com>>; usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> Subject: Re: [USRP-users] Re: Timed Commands Not Working Correct -- I am using the stock FPGA image for the E320 and the N320. Thanks, Jim ________________________________ From: Marcus D. Leech <patchvonbr...@gmail.com<mailto:patchvonbr...@gmail.com>> Sent: Wednesday, February 2, 2022 10:39 AM To: Jim Palladino <j...@gardettoengineering.com<mailto:j...@gardettoengineering.com>>; usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> Subject: Re: [USRP-users] Re: Timed Commands Not Working On 2022-02-02 10:21, Jim Palladino wrote: Thanks Marcus. Please let me know if R&D comes back with anything. I'm at a bit of a loss . . . Thanks, Jim ________________________________ Just to clarify--this is with the stock FPGA image, correct? _______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> To unsubscribe send an email to usrp-users-le...@lists.ettus.com<mailto:usrp-users-le...@lists.ettus.com>
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
