Hi Jim, This sounds like a pretty big issue. I haven't chimed in because I couldn't say for sure if timed commands were working for me or not in UHD 4.1. I am using N321s with shared LO, so the normal commands I use for setting frequency aren't critical (from a timed command perspective) except for how the DDC/DUC might be handling them. In any case, once you find out the issue, could you please share the solution here. If I get a chance, I will try this on some of my devices. Rob
On Wed, Feb 2, 2022 at 12:22 PM Jim Palladino <j...@gardettoengineering.com> wrote: > Just to add one more data point, I just ran test_timed_commands on a > different computer connected to an X310 -- still UHD 4.1. I have the same > problem with that device where it looks like timed commands are not working > right. > > Thanks, > Jim > > ------------------------------ > *From:* Jim Palladino <j...@gardettoengineering.com> > *Sent:* Wednesday, February 2, 2022 10:44 AM > *To:* Marcus D. Leech <patchvonbr...@gmail.com>; > usrp-users@lists.ettus.com <usrp-users@lists.ettus.com> > *Subject:* Re: [USRP-users] Re: Timed Commands Not Working > > Correct -- I am using the stock FPGA image for the E320 and the N320. > > Thanks, > Jim > > ------------------------------ > *From:* Marcus D. Leech <patchvonbr...@gmail.com> > *Sent:* Wednesday, February 2, 2022 10:39 AM > *To:* Jim Palladino <j...@gardettoengineering.com>; > usrp-users@lists.ettus.com <usrp-users@lists.ettus.com> > *Subject:* Re: [USRP-users] Re: Timed Commands Not Working > > On 2022-02-02 10:21, Jim Palladino wrote: > > Thanks Marcus. Please let me know if R&D comes back with anything. I'm at > a bit of a loss . . . > > Thanks, > Jim > > ------------------------------ > > Just to clarify--this is with the stock FPGA image, correct? > > > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-le...@lists.ettus.com >
_______________________________________________ USRP-users mailing list -- usrp-users@lists.ettus.com To unsubscribe send an email to usrp-users-le...@lists.ettus.com
