Hello,
in case it would help i am also attaching the dmesg output from the usrp.
best,
Pavlos.
On Wed, Jul 15, 2020 at 5:14 PM Pavlos Basaras <pbasa...@gmail.com> wrote:
> Hello,
>
> that would be great!
>
> cheers,
> Pavlos.
>
> On Wed, Jul 15, 2020 at 5:07 PM Marcus D. Leech <patchvonbr...@gmail.com>
> wrote:
>
>> On 07/15/2020 10:02 AM, Pavlos Basaras wrote:
>> > Hello,
>> >
>> > thank you very much for your prompt reply.
>> >
>> > i copied the .mender file by using the "scp" command.
>> > Yes, i am running the command on the USRP.
>> >
>> > I am not sure if this is a problem but --initially when i created the
>> > .mender file, the host was running the UHD 3.14.0.0 and the USRP had
>> > 3.14.1.0. This is when the problem appeared first.
>> > Then i changed the uhd to 3.14.1.0 on the host to match exactly the
>> > UHD on the usrp, but the error still persists (or course i deleted the
>> > old file from the usrp).
>> >
>> > any ideas?
>> >
>> > best,
>> > P.
>> >
>> I'll have to bug some R&D people and get back to you.
>>
>>
>>
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.15.18-yocto-standard (oe-user@oe-host) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Fri Aug 16 19:51:00 UTC 2019
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: NI Ettus Research Project Sulfur SDR Rev3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39692 r8192 d21748 u69632
[ 0.000000] pcpu-alloc: s39692 r8192 d21748 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rw rootwait uio_pdrv_genirq.of_id=usrp-uio
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1023252K/1048576K available (8192K kernel code, 684K rwdata, 2472K rodata, 1024K init, 593K bss, 25324K reserved, 0K cma-reserved, 262144K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0x(ptrval) - 0x(ptrval) (9184 kB)
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 685 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 594 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 30122 entries in 89 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] slcr mapped to (ptrval)
[ 0.000000] L2C: platform modifies aux control register: 0x02060000 -> 0x02460000
[ 0.000000] L2C: DT/platform modifies aux control register: 0x02060000 -> 0x02460000
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46460001
[ 0.000000] zynq_clock_init: clkc starts at (ptrval)
[ 0.000000] Zynq clock init
[ 0.000011] sched_clock: 64 bits at 399MHz, resolution 2ns, wraps every 4398046511103ns
[ 0.000032] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns
[ 0.000062] Switching to timer-based delay loop, resolution 2ns
[ 0.000427] Console: colour dummy device 80x30
[ 0.001157] console [tty0] enabled
[ 0.001194] Calibrating delay loop (skipped), value calculated using timer frequency.. 799.99 BogoMIPS (lpj=3999999)
[ 0.001237] pid_max: default: 32768 minimum: 301
[ 0.001369] Security Framework initialized
[ 0.001557] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001591] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002340] CPU: Testing write buffer coherency: ok
[ 0.002652] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.040240] Setting up static identity map for 0x100000 - 0x100060
[ 0.060195] Hierarchical SRCU implementation.
[ 0.100196] smp: Bringing up secondary CPUs ...
[ 0.170503] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.170658] smp: Brought up 1 node, 2 CPUs
[ 0.170705] SMP: Total of 2 processors activated (1599.99 BogoMIPS).
[ 0.170729] CPU: All CPU(s) started in SVC mode.
[ 0.171843] devtmpfs: initialized
[ 0.176246] random: get_random_u32 called from bucket_table_alloc+0x1d0/0x210 with crng_init=0
[ 0.176645] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.177036] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.177086] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.177367] xor: measuring software checksum speed
[ 0.270176] arm4regs : 1200.000 MB/sec
[ 0.370183] 8regs : 916.800 MB/sec
[ 0.470176] 32regs : 968.400 MB/sec
[ 0.470200] xor: using function: arm4regs (1200.000 MB/sec)
[ 0.470230] pinctrl core: initialized pinctrl subsystem
[ 0.471197] NET: Registered protocol family 16
[ 0.472081] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.473184] cpuidle: using governor menu
[ 0.474837] GPIO line 910 (ledn) hogged as output/high
[ 0.479822] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.479864] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.480146] zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
[ 0.480586] e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 25, base_baud = 6249999) is a xuartps
[ 0.958106] console [ttyPS0] enabled
[ 0.962097] e0001000.serial: ttyPS1 at MMIO 0xe0001000 (irq = 26, base_baud = 6249999) is a xuartps
[ 1.150299] raid6: int32x1 gen() 150 MB/s
[ 1.320258] raid6: int32x1 xor() 124 MB/s
[ 1.490491] raid6: int32x2 gen() 146 MB/s
[ 1.660244] raid6: int32x2 xor() 129 MB/s
[ 1.830206] raid6: int32x4 gen() 134 MB/s
[ 2.000371] raid6: int32x4 xor() 93 MB/s
[ 2.170232] raid6: int32x8 gen() 135 MB/s
[ 2.340364] raid6: int32x8 xor() 97 MB/s
[ 2.344582] raid6: using algorithm int32x1 gen() 150 MB/s
[ 2.349945] raid6: .... xor() 124 MB/s, rmw enabled
[ 2.354818] raid6: using intx1 recovery algorithm
[ 2.360570] SCSI subsystem initialized
[ 2.364475] usbcore: registered new interface driver usbfs
[ 2.369942] usbcore: registered new interface driver hub
[ 2.375304] usbcore: registered new device driver usb
[ 2.380440] usb_phy_generic phy0: phy0 supply vcc not found, using dummy regulator
[ 2.388198] Linux video capture interface: v2.00
[ 2.393047] EDAC MC: Ver: 3.0.0
[ 2.396599] FPGA manager framework
[ 2.400118] fpga-region fpga-full: FPGA Region probed
[ 2.405321] fpga-region amba:fpga-region@40000000: FPGA Region probed
[ 2.412167] random: fast init done
[ 2.416172] clocksource: Switched to clocksource arm_global_timer
[ 2.544131] NET: Registered protocol family 2
[ 2.549096] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 2.556201] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.562713] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.569098] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.575018] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.581671] NET: Registered protocol family 1
[ 2.586402] RPC: Registered named UNIX socket transport module.
[ 2.592286] RPC: Registered udp transport module.
[ 2.596932] RPC: Registered tcp transport module.
[ 2.601637] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.608593] hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing.
[ 2.616711] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 2.626193] Initialise system trusted keyrings
[ 2.630790] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 2.645197] NFS: Registering the id_resolver key type
[ 2.650260] Key type id_resolver registered
[ 2.654369] Key type id_legacy registered
[ 2.658374] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.665294] fuse init (API version 7.26)
[ 2.673409] Key type asymmetric registered
[ 2.677449] Asymmetric key parser 'x509' registered
[ 2.682403] bounce: pool size: 64 pages
[ 2.686225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.693587] io scheduler noop registered
[ 2.697456] io scheduler deadline registered
[ 2.702018] io scheduler cfq registered (default)
[ 2.706652] io scheduler mq-deadline registered
[ 2.711288] io scheduler kyber registered
[ 2.716885] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
[ 2.723573] dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 2.732479] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.742943] brd: module loaded
[ 2.764643] libphy: Fixed MDIO Bus: probed
[ 2.770306] CAN device driver interface
[ 2.775091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.781671] usbcore: registered new interface driver usb-storage
[ 2.787814] chipidea-usb2 e0002000.usb: e0002000.usb supply vbus not found, using dummy regulator
[ 2.810547] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.815388] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 2.850528] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.856675] hub 1-0:1.0: USB hub found
[ 2.860399] hub 1-0:1.0: 1 port detected
[ 2.866003] mousedev: PS/2 mouse device common for all mice
[ 2.871815] i2c /dev entries driver
[ 2.876005] cdns-i2c e0004000.i2c: 400 kHz mmio e0004000 irq 22
[ 2.888887] cros-ec-i2c 1-001e: Chrome EC device registered
[ 2.894522] cdns-i2c e0005000.i2c: 400 kHz mmio e0005000 irq 23
[ 2.903050] at24 2-0050: 256 byte 24c02 EEPROM, read-only, 0 bytes/write
[ 2.910373] i2c i2c-0: Added multiplexed i2c bus 3
[ 2.915366] i2c i2c-0: Added multiplexed i2c bus 4
[ 2.920382] i2c i2c-0: Added multiplexed i2c bus 5
[ 2.925557] pca953x 6-0022: 6-0022 supply vcc not found, using dummy regulator
[ 2.937115] i2c i2c-0: Added multiplexed i2c bus 6
[ 2.971088] tpm tpm0: starting up the TPM manually
[ 3.061372] i2c i2c-0: Added multiplexed i2c bus 7
[ 3.067617] rtc-ds1374 8-0068: rtc core: registered ds1374 as rtc0
[ 3.074450] i2c i2c-0: Added multiplexed i2c bus 8
[ 3.080039] at24 9-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.087271] pca953x 9-0020: 9-0020 supply vcc not found, using dummy regulator
[ 3.096388] i2c i2c-0: Added multiplexed i2c bus 9
[ 3.102020] at24 10-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.109299] pca953x 10-0020: 10-0020 supply vcc not found, using dummy regulator
[ 3.118583] i2c i2c-0: Added multiplexed i2c bus 10
[ 3.123460] pca954x 0-0070: registered 8 multiplexed busses for I2C switch pca9548
[ 3.132609] lm75 9-0048: hwmon0: sensor 'lm75'
[ 3.138077] lm75 10-0048: hwmon1: sensor 'lm75'
[ 3.153504] watchdog: cdns_wdt watchdog: cannot register miscdev on minor=130 (err=-16).
[ 3.161563] watchdog: cdns_wdt watchdog: a legacy watchdog module is probably present.
[ 3.169606] cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer at (ptrval) with timeout 10s
[ 3.178552] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-de...@redhat.com
[ 3.187273] EDAC MC: ECC not enabled
[ 3.190972] Xilinx Zynq CpuIdle Driver started
[ 3.195735] sdhci: Secure Digital Host Controller Interface driver
[ 3.201871] sdhci: Copyright(c) Pierre Ossman
[ 3.206181] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.270575] mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using ADMA
[ 3.278931] usbcore: registered new interface driver usbhid
[ 3.285498] usbhid: USB HID core driver
[ 3.291435] cros-ec-i2c 1-001e: request of size 194 is too big (max: 120)
[ 3.298157] cros-ec-i2c 1-001e: request of size 194 is too big (max: 120)
[ 3.304972] cros-ec-i2c 1-001e: request of size 194 is too big (max: 120)
[ 3.311734] cros-ec-i2c 1-001e: request of size 194 is too big (max: 120)
[ 3.318486] cros-ec-i2c 1-001e: request of size 194 is too big (max: 120)
[ 3.325273] cros-ec-i2c 1-001e: request of size 194 is too big (max: 120)
[ 3.332047] cros-ec-i2c 1-001e: request of size 194 is too big (max: 120)
[ 3.351382] fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
[ 3.358081] oprofile: using arm/armv7-ca9
[ 3.362141] u32 classifier
[ 3.364771] Actions configured
[ 3.368388] NET: Registered protocol family 17
[ 3.372836] can: controller area network core (rev 20170425 abi 9)
[ 3.379037] NET: Registered protocol family 29
[ 3.383434] can: raw protocol (rev 20170425)
[ 3.387663] can: broadcast manager protocol (rev 20170425 t)
[ 3.393357] can: netlink gateway (rev 20170425) max_hops=1
[ 3.399043] Key type dns_resolver registered
[ 3.403499] Registering SWP/SWPB emulation handler
[ 3.408895] Loading compiled-in X.509 certificates
[ 3.415314] Btrfs loaded, crc32c=crc32c-generic
[ 3.420800] Key type encrypted registered
[ 3.433635] libphy: MACB_mii_bus: probed
[ 3.437716] mmc0: new high speed SDHC card at address 0007
[ 3.444128] mmcblk0: mmc0:0007 APUSD 14.9 GiB
[ 3.449532] mmcblk0: p1 p2 p3 p4
[ 3.541387] Marvell 88E1510 e000b000.ethernet-ffffffff:00: attached PHY driver [Marvell 88E1510] (mii_bus:phy_addr=e000b000.ethernet-ffffffff:00, irq=POLL)
[ 3.555287] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 27 (00:80:2f:28:3e:2b)
[ 3.565174] console [netcon0] enabled
[ 3.568764] netconsole: network logging started
[ 3.573811] input: gpio-keys as /devices/soc0/gpio-keys/input/input0
[ 3.580836] rtc-ds1374 8-0068: setting system clock to 2020-07-16 05:40:43 UTC (1594878043)
[ 3.589132] of_cfs_init
[ 3.591651] of_cfs_init: OK
[ 3.594956] md: Waiting for all devices to be available before autodetect
[ 3.601790] md: If you don't use raid, use raid=noautodetect
[ 3.608202] md: Autodetecting RAID arrays.
[ 3.612287] md: autorun ...
[ 3.615027] md: ... autorun DONE.
[ 3.620978] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 3.630225] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 4.250604] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.258687] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 4.269183] devtmpfs: mounted
[ 4.278044] Freeing unused kernel memory: 1024K
[ 4.660466] systemd[1]: systemd 237 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 4.682459] systemd[1]: Detected architecture arm.
[ 4.690697] random: crng init done
[ 4.731109] systemd[1]: Set hostname to <ni-n3xx-31B4030>.
[ 4.745914] systemd[1]: Hardware watchdog 'DS1374 WTD', version 0
[ 4.752920] systemd[1]: Set hardware watchdog to 10s.
[ 4.757943] rtc_ds1374: enable watchdog
[ 4.974891] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 4.991991] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 5.131931] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 5.173921] systemd[1]: Reached target Swap.
[ 5.200449] systemd[1]: Reached target Remote File Systems.
[ 5.834732] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 6.532527] systemd-journald[84]: Received request to flush runtime journal from PID 1
[ 7.818307] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 8.021911] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[ 12.100942] macb e000b000.ethernet eth0: link up (100/Full)
[ 14.902634] fpga_manager fpga0: writing n310.bin to Xilinx Zynq FPGA Manager
[ 15.763960] libphy: nixge_mii_bus: probed
[ 15.791749] libphy: nixge_mii_bus: probed
[ 15.811583] nixge 40000000.ethernet sfp0: renamed from eth1
[ 16.051709] rfnoc_crossbar crossbar0: NI Platform RFNoC Crossbar registered
[ 16.066748] nixge 40008000.ethernet sfp1: renamed from eth1
[ 16.179330] usrp-dma-core: Registered rx-dma0
[ 16.196899] usrp-dma-core: Registered rx-dma1
[ 16.219497] usrp-dma-core: Registered rx-dma2
[ 16.248220] usrp-dma-core: Registered rx-dma3
[ 16.268524] usrp-dma-core: Registered rx-dma4
[ 16.281127] usrp-dma-core: Registered rx-dma5
[ 16.293945] usrp-dma-core: Registered rx-dma6
[ 16.316980] usrp-dma-core: Registered rx-dma7
[ 16.325523] usrp-dma-core: Registered rx-dma8
[ 16.341635] usrp-dma-core: Registered rx-dma9
[ 16.350328] usrp-dma-core: Registered tx-dma0
[ 16.362205] usrp-dma-core: Registered tx-dma1
[ 16.378923] usrp-dma-core: Registered tx-dma2
[ 16.399418] usrp-dma-core: Registered tx-dma3
[ 16.423651] usrp-dma-core: Registered tx-dma4
[ 16.440722] usrp-dma-core: Registered tx-dma5
[ 16.456677] usrp-dma-core: Registered tx-dma6
[ 16.462454] usrp-dma-core: Registered tx-dma7
[ 16.468171] usrp-dma-core: Registered tx-dma8
[ 16.474046] usrp-dma-core: Registered tx-dma9
[ 17.160536] nixge 40000000.ethernet sfp0: Link is Down
[ 17.320542] nixge 40008000.ethernet sfp1: Link is Up - 10Gbps/Full - flow control off
[ 19.500540] nixge 40008000.ethernet sfp1: Link is Down
[ 382.595918] cros-ec-ctl cros-ec-ctl.0.auto: Some logs may have been dropped...
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
