Dear community, i am using the usrp n310 device. I am following the start up guide from https://kb.ettus.com/USRP_N300/N310/N320/N321_Getting_Started_Guide#Setting_up_a_Serial_Console_Connection for the initial setup of the usrp.
I completed the installation instructions for the host from https://kb.ettus.com/Building_and_Installing_the_USRP_Open-Source_Toolchain_(UHD_and_GNU_Radio)_on_Linux everything seemed ok. I can connect to the device through both ssh and by the serial port. I am trying to use mender to update the filesystem at the usrp device. I executed the command: sudo uhd_images_downloader -t mender -t n3xx --yes at the host to obtain usrp_n3xx_fs.mender, which i then copied to the usrp. At the usrp i am using the command: mender -rootfs /home/root/usrp_n3xx_fs.mender to start the update of the system but i have the following incompatibility issue : ERRO[0000] Installation failed: installer: failed to read and install update: installer: image (device types [ni-sulfur-rev6-mender ni-sulfur-rev5-mender ni-sulfur-rev4-mender ni-sulfur-rev3-mender ni-sulfur-rev6 ni-sulfur-rev5 ni-sulfur-rev4 ni-sulfur-rev3]) not compatible with device ni-sulfur-rev11-mender module=rootfs ERRO[0000] installer: failed to read and install update: installer: image (device types [ni-sulfur-rev6-mender ni-sulfur-rev5-mender ni-sulfur-rev4-mender ni-sulfur-rev3-mender ni-sulfur-rev6 ni-sulfur-rev5 ni-sulfur-rev4 ni-sulfur-rev3]) not compatible with device ni-sulfur-rev11-mender module=main How can i resolve this? Details on the UHD intalled on both the host and the usrp device" HOST computer uhd: [INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800; UHD_3.14.1.HEAD-0-g0347a6d8 USRP uhd: [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106600; UHD_3.14.1.1-0-g0347a6d8 all the best, Pavlos.
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
