The sticker for sbx shows F33612 and F33814. How will this help ?
On Wed, Jul 17, 2019 at 1:50 PM Jason Matusiak < ja...@gardettoengineering.com> wrote: > Sumit, > > OK, the last idea I have: > > There is a sticker on the back of the N-series devices it *usually* says > the version there, but not always. This has a little info: > https://kb.ettus.com/About_the_Motherboard_and_Daughtercard_EEPROM_on_USRP_Devices#N200.2F210_EEPROM > > Do they match? > > ------------------------------ > *From:* Sumit Kumar <cog...@gmail.com> > *Sent:* Wednesday, July 17, 2019 7:45 AM > *To:* Jason Matusiak <ja...@gardettoengineering.com> > *Cc:* usrp-users@lists.ettus.com <usrp-users@lists.ettus.com> > *Subject:* Re: [USRP-users] Sequence Errors N200 > > Hi Jason, > > Yes they are consistent, I mean the output of uhd_usrp_probe for both N200 > is exactly the same (except the ip, serial and mac addr). > I do not know where the problem is! Hardware or software > > Regards > Sumit > > On Wed, Jul 17, 2019 at 1:19 PM Jason Matusiak < > ja...@gardettoengineering.com> wrote: > > I am not really an N-series guy, so this probably won't be helpful. Have > you tried doing a uhd_usrp_probe on both devices and seen that the > responses are consistent? > > ------------------------------ > *From:* USRP-users <usrp-users-boun...@lists.ettus.com> on behalf of > Sumit Kumar via USRP-users <usrp-users@lists.ettus.com> > *Sent:* Wednesday, July 17, 2019 7:15 AM > *To:* usrp-users@lists.ettus.com <usrp-users@lists.ettus.com> > *Subject:* [USRP-users] Sequence Errors N200 > > Hi, > I am trying transmit using Ettus N200 (call it A) but getting this error > message on the console > > > SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSUSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS.................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... > > I looked for it on google and found these links > > http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2014-May/037495.html > > http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2012-July/032838.html > > Both the links suggested problem related to the gigabit port. Then I > connected another USRP N200 (call it B) to the same laptop and tried > transmitting using that as there were no such sequence error messages. > > This makes me believe there is some problem with the first USRP, i.e., A. > > Further I tried with different versions of UHD 3.11, UHD 3.15.. but its > the same. > > Receive is good only transmit is throwing error. > > Not only with UHD, even in labview, when I transmit, I see nothing coming > out from the N200 (A). > > I am using SBXv2 daughter board. > > Any clue! > > Regards > -- > -- > Sumit kumar > Postdoc > SnT, Luxembourg > > > > > -- > -- > Sumit kumar > Postdoc > SnT, Luxembourg > > > -- -- Sumit kumar Postdoc SnT, Luxembourg
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com