Sorry about spamming this list :) I just rebuilt the clean/unmodified X4_200 image on the X440 just to make sure the build process worked. I loaded the created .bit file and am now getting the following error:
Specified destination address is unreachable: 1:0. What could be the problem? Google says it's a mismatch between the UHD and FPGA versions, but I can't see how that would happen. -------------------------- ~/uhd-git/host/build$ uhd_usrp_probe --args addr=192.168.1.10 [INFO] [UHD] linux; GNU C++ version 13.3.0; Boost_108300; UHD_4.9.0.0-290-gcfb98407 [INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.1.10,type=x4xx,product=x440,serial=344FF6B,name=ni-x4xx-344FF6B,fpga=X4_200,claimed=False,addr=192.168.1.10 [INFO] [MPM.PeriphManager] init() called with device args `fpga=X4_200,mgmt_addr=192.168.1.10,name=ni-x4xx-344FF6B,product=x440,clock_source=internal,time_source=internal,initializing=True'. [ERROR] [RFNOC::GRAPH] Caught exception while initializing graph: RfnocError: Specified destination address is unreachable: 1:0 Error: RuntimeError: Failure to create rfnoc_graph. ------------------- Eugene Grayver, Ph.D. Principal Engineer 310-336-1274
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
