That is no good :( this most probably mean this is red5sip issue :( Will try to find some time and reproduce this issue locally
On Mon, Mar 27, 2017 at 11:48 PM, Alejandro Alonso < alejandro.alo...@quobis.com> wrote: > Hi Maxim, > > I hope you are doing well. > > When the two users are in the same place the audio is ok. We tested calls > with both of them logged in the OM room and another one with two users in > softphones. > > The noise is only present when there is a user in the OM room and other > using a softphone. Could it be caused by some audio conversion? > > We have assigned more resources to the host but the noise is still there. > > Do you have any other idea? > > Thanks, > Alejandro > > *Alejandro Alonso Ferreira* > VoIP Systems Engineer @ Quobis <http://quobis.com/> | e: alejand > ro.alo...@quobis.com | p: (+34) 902 999 465 > — > This electronic message contains information which may be privileged or > confidential. The information is intended to be for the use of the > individual(s) or entity named above. > > 2016-11-07 17:08 GMT+01:00 Maxim Solodovnik <solomax...@gmail.com>: > >> Do you have issues in case only OM users are in room? >> Can you connect to the same room as 2 free-node users (with no OM users), >> is there any noise in this case? >> >> On Mon, Nov 7, 2016 at 9:33 PM, Alejandro Alonso < >> alejandro.alo...@quobis.com> wrote: >> >>> Hi Maxim, >>> >>> Thanks for your answer. >>> >>> The noise starts when someone else joins the conference and only the OM >>> user hears this noise. >>> >>> We have used different softphones and microphones/headphones with >>> similar results. In addition, we use this same equipment in other scenarios >>> (Hangout, Skype) and they work fine. >>> >>> Best Regards, >>> Alejandro >>> >>> *Alejandro Alonso Ferreira* >>> VoIP Systems Engineer @ Quobis <http://quobis.com/> | e: alejand >>> ro.alo...@quobis.com | p: (+34) 902 999 465 >>> — >>> This electronic message contains information which may be privileged or >>> confidential. The information is intended to be for the use of the >>> individual(s) or entity named above. >>> >>> 2016-11-07 14:19 GMT+01:00 Maxim Solodovnik <solomax...@gmail.com>: >>> >>>> Hello Alejandro, >>>> >>>> Am I right thinking you have clear sound without softphone connected to >>>> room? >>>> Can you try to use better hands free with your softphone? >>>> According to my observations good Mic/Headphones can significantly >>>> improve situation >>>> >>>> On Fri, Nov 4, 2016 at 9:03 PM, Alejandro Alonso < >>>> alejandro.alo...@quobis.com> wrote: >>>> >>>>> Hi Maxim, >>>>> >>>>> Finally we have been able to integrate OM3.1 (red5312) with FreeSWITCH >>>>> without using Asterisk. >>>>> >>>>> The scenario has improved a bit, now if the user is registered in a >>>>> softphone he can hear the conference audio correctly. >>>>> On the other hand, if the user is logged in the OM he still hears a >>>>> lot of noise, even when the other users are in silence. >>>>> >>>>> Do you have any idea about what could be causing this? >>>>> >>>>> Thanks in advance. >>>>> >>>>> Best Regards, >>>>> Alejandro >>>>> >>>>> *Alejandro Alonso Ferreira* >>>>> VoIP Systems Engineer @ Quobis <http://quobis.com/> | e: alejand >>>>> ro.alo...@quobis.com | p: (+34) 902 999 465 >>>>> — >>>>> This electronic message contains information which may be privileged >>>>> or confidential. The information is intended to be for the use of the >>>>> individual(s) or entity named above. >>>>> >>>>> 2016-10-11 18:53 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: >>>>> >>>>>> I would say SIP part haven't changed alot >>>>>> the main changes are: >>>>>> 1) change source location >>>>>> 2) change build system to maven >>>>>> 3) fix build >>>>>> I can fix issue after my vacation, you can help me to reproduce it :) >>>>>> >>>>>> On Tue, Oct 11, 2016 at 10:14 PM, Elena Darriba < >>>>>> elena.darr...@quobis.com> wrote: >>>>>> >>>>>>> Hello Maxim, >>>>>>> >>>>>>> Ok, thank you very much, we are doing several tests and new version >>>>>>> does not seem to connect well with freeswitch... we are reviewing it, >>>>>>> thanks. >>>>>>> >>>>>>> >>>>>>> BR, >>>>>>> Elena. >>>>>>> >>>>>>> *Elena Darriba* >>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>> >>>>>>> 2016-10-11 17:08 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: >>>>>>> >>>>>>>> Hello Elena, >>>>>>>> >>>>>>>> to be fair I don't know, I believe in case it was able to integrate >>>>>>>> it before it is possible to integrate it now ... >>>>>>>> >>>>>>>> On Tue, Oct 11, 2016 at 7:45 PM, Elena Darriba < >>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>> >>>>>>>>> Hello Maxim: >>>>>>>>> >>>>>>>>> Is it possible integrate OM3.1 (red5312) with FreeSWITCH without >>>>>>>>> Asterisk? Perhaps VoIP integration is it available only with Asterisk? >>>>>>>>> Older red5 versions works fine with FreeSWITCH, but the mentioned >>>>>>>>> noise >>>>>>>>> appeared. >>>>>>>>> >>>>>>>>> >>>>>>>>> Thanks in advance. >>>>>>>>> >>>>>>>>> Best Regards, >>>>>>>>> Elena >>>>>>>>> >>>>>>>>> *Elena Darriba* >>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>> >>>>>>>>> 2016-07-12 15:48 GMT+02:00 Elena Darriba <elena.darr...@quobis.com >>>>>>>>> >: >>>>>>>>> >>>>>>>>>> Ok, I test it as soon as possible, thanks! >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *Elena Darriba* >>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>> >>>>>>>>>> 2016-07-12 15:45 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com >>>>>>>>>> >: >>>>>>>>>> >>>>>>>>>>> Maybe you can try latest maven? >>>>>>>>>>> >>>>>>>>>>> WBR, Maxim >>>>>>>>>>> (from mobile, sorry for the typos) >>>>>>>>>>> On Jul 12, 2016 19:30, "Elena Darriba" <elena.darr...@quobis.com> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> [root@centos7-1 ~]# mvn -v >>>>>>>>>>>> Apache Maven 3.0.5 (Red Hat 3.0.5-16) >>>>>>>>>>>> Maven home: /usr/share/maven >>>>>>>>>>>> Java version: 1.7.0_79, vendor: Oracle Corporation >>>>>>>>>>>> Java home: /opt/jdk1.7.0_79/jre >>>>>>>>>>>> Default locale: es_ES, platform encoding: UTF-8 >>>>>>>>>>>> OS name: "linux", version: "3.10.0-327.22.2.el7.x86_64", arch: >>>>>>>>>>>> "amd64", family: "unix" >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>> >>>>>>>>>>>> 2016-07-12 15:25 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>> solomax...@gmail.com>: >>>>>>>>>>>> >>>>>>>>>>>>> for some weird reason default maven repository is not being >>>>>>>>>>>>> tried >>>>>>>>>>>>> what is your maven version? >>>>>>>>>>>>> >>>>>>>>>>>>> On Tue, Jul 12, 2016 at 7:22 PM, Elena Darriba < >>>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Maxim, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks a lot for your comments. Documentation is not updated >>>>>>>>>>>>>> with maven... I am trying to compile it and it shows the >>>>>>>>>>>>>> following error: >>>>>>>>>>>>>> >>>>>>>>>>>>>> [INFO] Scanning for projects... >>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>> >>>>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>>>> [INFO] Building red5sip 3.1-SNAPSHOT >>>>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>>>> [INFO] BUILD FAILURE >>>>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>>>> [INFO] Total time: 6.758s >>>>>>>>>>>>>> [INFO] Finished at: Tue Jul 12 15:15:01 CEST 2016 >>>>>>>>>>>>>> [INFO] Final Memory: 9M/22M >>>>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>>>> [ERROR] Failed to execute goal on project red5sip: Could not >>>>>>>>>>>>>> resolve dependencies for project >>>>>>>>>>>>>> org.red5.sip:red5sip:jar:3.1-SNAPSHOT: >>>>>>>>>>>>>> Failed to collect dependencies for >>>>>>>>>>>>>> [org.red5:red5-client:jar:1.0.7-RELEASE >>>>>>>>>>>>>> (compile), javax.media:jmf:jar:2.1.1e (compile), >>>>>>>>>>>>>> commons-daemon:commons-daemon:jar:1.0.15 (compile), >>>>>>>>>>>>>> org.apache.openmeetings:openmeetings-db:jar:3.1.2 (compile), >>>>>>>>>>>>>> junit:junit:jar:4.12 (test)]: Failed to read artifact descriptor >>>>>>>>>>>>>> for >>>>>>>>>>>>>> org.apache.openmeetings:openmeetings-db:jar:3.1.2: Failure >>>>>>>>>>>>>> to find org.apache:apache:pom:18-SNAPSHOT in >>>>>>>>>>>>>> https://dl.bintray.com/openmeetings/maven was cached in the >>>>>>>>>>>>>> local repository, resolution will not be reattempted until the >>>>>>>>>>>>>> update >>>>>>>>>>>>>> interval of openmeetings-bintray has elapsed or updates are >>>>>>>>>>>>>> forced -> [Help >>>>>>>>>>>>>> 1] >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>> >>>>>>>>>>>>>> BR, >>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2016-07-12 15:06 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>> solomax...@gmail.com>: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> you need to build using maven: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> mvn clean package >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Tue, Jul 12, 2016 at 6:28 PM, Elena Darriba < >>>>>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I am compiling red5sip, not red5... >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>>> e: elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2016-07-12 14:23 GMT+02:00 Juan Carrera <carre...@unizar.es >>>>>>>>>>>>>>>> >: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi, i'm compiling right now version 3.1.1 and as stated in >>>>>>>>>>>>>>>>> http://openmeetings.apache.org/BuildInstructions.html you >>>>>>>>>>>>>>>>> have to use maven instead of ant. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> BTW I don't know if its fixed in trunk, but i have edited >>>>>>>>>>>>>>>>> pom.xml because apache rat plugin snapshot is not available >>>>>>>>>>>>>>>>> and changed >>>>>>>>>>>>>>>>> line 917 to use version 0.,12: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <groupId>org.apache.rat</groupId> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <artifactId>apache-rat-plugin</artifactId> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <version>0.12</version> >>>>>>>>>>>>>>>>> <configuration> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Kind regards >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> El 12/07/16 a las 13:56, Elena Darriba escribió: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Sorry, I am trying compiling master but there is not >>>>>>>>>>>>>>>>> build.xml file... how could I proceed? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> [root@centos7-1 red5sip]# git checkout master >>>>>>>>>>>>>>>>> Already on 'master' >>>>>>>>>>>>>>>>> [root@centos7-1 red5sip]# ls -l >>>>>>>>>>>>>>>>> total 8 >>>>>>>>>>>>>>>>> drwxr-xr-x 2 root root 24 jul 12 13:52 lib >>>>>>>>>>>>>>>>> drwxr-xr-x 2 root root 24 jun 29 10:22 log >>>>>>>>>>>>>>>>> drwxr-xr-x 4 root root 30 jun 29 09:57 out >>>>>>>>>>>>>>>>> -rw-r--r-- 1 root root 3577 jul 12 13:52 pom.xml >>>>>>>>>>>>>>>>> -rw-r--r-- 1 root root 123 jul 12 13:52 README.md >>>>>>>>>>>>>>>>> drwxr-xr-x 3 root root 17 jul 12 13:52 src >>>>>>>>>>>>>>>>> [root@centos7-1 red5sip]# ant >>>>>>>>>>>>>>>>> Buildfile: build.xml does not exist! >>>>>>>>>>>>>>>>> Build failed >>>>>>>>>>>>>>>>> [root@centos7-1 red5sip]# >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>>>> e: <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>> p: (+34) 986 911 644 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2016-07-07 10:20 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>> solomax...@gmail.com>: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> please use master for 3.1.x >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Thu, Jul 7, 2016 at 1:56 PM, Elena Darriba < >>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi Maxim, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> The current version is 3.1.x, sorry for my mistake. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> What branch of red5sip must I to compile? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> BR, >>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>>>>>> e: elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2016-07-06 18:13 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I recently have fixed master branch to be buildable >>>>>>>>>>>>>>>>>>>> (for 3.1.x) >>>>>>>>>>>>>>>>>>>> Do you have any particular reason to use 3.0.x instead >>>>>>>>>>>>>>>>>>>> of 3.1.x? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Wed, Jul 6, 2016 at 10:00 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> We are using OM 3.0 on CentOS 7.2, I will check the >>>>>>>>>>>>>>>>>>>>> exact version of OM. What branch should I compile? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> BR, >>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>> p: (+34) 986 911 644 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2016-07-06 16:12 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hello Elena, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> <https://github.com/openmeetings/red5sip/tree/red5sip_3.0> >>>>>>>>>>>>>>>>>>>>>> https://github.com/openmeeting >>>>>>>>>>>>>>>>>>>>>> s/red5sip/tree/red5sip_3.0 branch is stored for >>>>>>>>>>>>>>>>>>>>>> historical reasons and might be not compilable >>>>>>>>>>>>>>>>>>>>>> what version of OM are you using? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Wed, Jun 29, 2016 at 7:16 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I tried to compile src code from master (using >>>>>>>>>>>>>>>>>>>>>>> red5sip_3.0 branch) and I detected some errors. How can >>>>>>>>>>>>>>>>>>>>>>> I compile the new >>>>>>>>>>>>>>>>>>>>>>> version on master? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>>>> p: (+34) 986 911 644 >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2016-05-14 9:58 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hello Elena, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I have finally installed Asterisk >>>>>>>>>>>>>>>>>>>>>>>> fixed red5sip: >>>>>>>>>>>>>>>>>>>>>>>> <https://github.com/openmeetings/red5sip/tree/master> >>>>>>>>>>>>>>>>>>>>>>>> https://github.com/openmeetings/red5sip/tree/master >>>>>>>>>>>>>>>>>>>>>>>> hopefully will be able to test everything together >>>>>>>>>>>>>>>>>>>>>>>> (hopefully LinPhone will work with Asterisk) >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Thu, May 12, 2016 at 12:48 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Have you any update about this issue? >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>>>>>> p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> 2016-04-25 15:23 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> will try to do it this week >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> @Timur, maybe you can help? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Apr 25, 2016 at 5:59 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Please, could you tell me an aproximate date for >>>>>>>>>>>>>>>>>>>>>>>>>>> this review? >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> 2016-04-25 9:52 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello All, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> sorry for keeping silence on the topic, >>>>>>>>>>>>>>>>>>>>>>>>>>>> Unfortunately I had no time to configure >>>>>>>>>>>>>>>>>>>>>>>>>>>> asterisk server (old one deceased) >>>>>>>>>>>>>>>>>>>>>>>>>>>> I'll write back as soon as I'll find time and >>>>>>>>>>>>>>>>>>>>>>>>>>>> check the issue >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Apr 25, 2016 at 1:29 PM, Elena Darriba >>>>>>>>>>>>>>>>>>>>>>>>>>>> < <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Christos, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Install Asterisk is very easy, you can compile >>>>>>>>>>>>>>>>>>>>>>>>>>>>> the code so you can use Debian, Ubuntu or other >>>>>>>>>>>>>>>>>>>>>>>>>>>>> OS. Also I think you can >>>>>>>>>>>>>>>>>>>>>>>>>>>>> download it from repositories. I use the >>>>>>>>>>>>>>>>>>>>>>>>>>>>> following instructions: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> <http://openmeetings.apache.org/red5sip-integration_3.0.html> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://openmeetings.apache.org/red5sip-integra >>>>>>>>>>>>>>>>>>>>>>>>>>>>> tion_3.0.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then, when Asterisk and red5sip are running, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> you can set users and create a SIP room in >>>>>>>>>>>>>>>>>>>>>>>>>>>>> OpenMeetings. In my scenario, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> SIP signaling is OK, and users can use SIP room, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> but there is uncomfortable >>>>>>>>>>>>>>>>>>>>>>>>>>>>> noise and in some cases is impossible to listen >>>>>>>>>>>>>>>>>>>>>>>>>>>>> the other caller party. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 902 999 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 465 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2016-04-22 23:13 GMT+02:00 Christos >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Moustakakis < <moustaka...@yahoo.gr> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> moustaka...@yahoo.gr>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Elena, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Could you please send me the instructions you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> follow to install the Asterisk in Debian because >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have tried to install in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu 14.04 and I didn't manage? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Also, I would like to ask, when someone >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install the Asterisk could set any sip account? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christos. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have an scenario with OpenMeetings 3, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> red5sip and Asterisk installed on a Debian >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> following the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> official instructions. SIP signaling is correct >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and calls established >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> normally, but users listen noise during a call >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and sometimes is impossible >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to hear the other caller party. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We are carrying tests using FreeSWITCH on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different OS (RHEL, CentOS) instead Asterisk and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> also using older versions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of OM but results are the same. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> RTP captured between Asterisk and Red5SIP >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sounds without noise. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Does anybody faced a situation like this? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Could you please help us? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 902 999 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 465 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> [image: Logotipo del servicio de informática y >>>>>>>>>>>>>>>>> comunicaciones. Universidad Zaragoza] >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> *Juan Ramón Carrera Marcén * >>>>>>>>>>>>>>>>> * Área de aplicaciones* >>>>>>>>>>>>>>>>> Residencia de profesores >>>>>>>>>>>>>>>>> Pedro Cerbuna 12, 50009 Zaragoza >>>>>>>>>>>>>>>>> Tel. (34) 876553689 >>>>>>>>>>>>>>>>> carre...@unizar.es >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> [image: unizar.es] >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> WBR >>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> WBR >>>>>> Maxim aka solomax >>>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> WBR >>>> Maxim aka solomax >>>> >>> >>> >> >> >> -- >> WBR >> Maxim aka solomax >> > > -- WBR Maxim aka solomax
