Hello Alejandro, Am I right thinking you have clear sound without softphone connected to room? Can you try to use better hands free with your softphone? According to my observations good Mic/Headphones can significantly improve situation
On Fri, Nov 4, 2016 at 9:03 PM, Alejandro Alonso < alejandro.alo...@quobis.com> wrote: > Hi Maxim, > > Finally we have been able to integrate OM3.1 (red5312) with FreeSWITCH > without using Asterisk. > > The scenario has improved a bit, now if the user is registered in a > softphone he can hear the conference audio correctly. > On the other hand, if the user is logged in the OM he still hears a lot of > noise, even when the other users are in silence. > > Do you have any idea about what could be causing this? > > Thanks in advance. > > Best Regards, > Alejandro > > *Alejandro Alonso Ferreira* > VoIP Systems Engineer @ Quobis <http://quobis.com/> | e: alejand > ro.alo...@quobis.com | p: (+34) 902 999 465 > — > This electronic message contains information which may be privileged or > confidential. The information is intended to be for the use of the > individual(s) or entity named above. > > 2016-10-11 18:53 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: > >> I would say SIP part haven't changed alot >> the main changes are: >> 1) change source location >> 2) change build system to maven >> 3) fix build >> I can fix issue after my vacation, you can help me to reproduce it :) >> >> On Tue, Oct 11, 2016 at 10:14 PM, Elena Darriba <elena.darr...@quobis.com >> > wrote: >> >>> Hello Maxim, >>> >>> Ok, thank you very much, we are doing several tests and new version does >>> not seem to connect well with freeswitch... we are reviewing it, thanks. >>> >>> >>> BR, >>> Elena. >>> >>> *Elena Darriba* >>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>> >>> 2016-10-11 17:08 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: >>> >>>> Hello Elena, >>>> >>>> to be fair I don't know, I believe in case it was able to integrate it >>>> before it is possible to integrate it now ... >>>> >>>> On Tue, Oct 11, 2016 at 7:45 PM, Elena Darriba < >>>> elena.darr...@quobis.com> wrote: >>>> >>>>> Hello Maxim: >>>>> >>>>> Is it possible integrate OM3.1 (red5312) with FreeSWITCH without >>>>> Asterisk? Perhaps VoIP integration is it available only with Asterisk? >>>>> Older red5 versions works fine with FreeSWITCH, but the mentioned noise >>>>> appeared. >>>>> >>>>> >>>>> Thanks in advance. >>>>> >>>>> Best Regards, >>>>> Elena >>>>> >>>>> *Elena Darriba* >>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>> >>>>> 2016-07-12 15:48 GMT+02:00 Elena Darriba <elena.darr...@quobis.com>: >>>>> >>>>>> Ok, I test it as soon as possible, thanks! >>>>>> >>>>>> >>>>>> >>>>>> *Elena Darriba* >>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>> >>>>>> 2016-07-12 15:45 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: >>>>>> >>>>>>> Maybe you can try latest maven? >>>>>>> >>>>>>> WBR, Maxim >>>>>>> (from mobile, sorry for the typos) >>>>>>> On Jul 12, 2016 19:30, "Elena Darriba" <elena.darr...@quobis.com> >>>>>>> wrote: >>>>>>> >>>>>>>> [root@centos7-1 ~]# mvn -v >>>>>>>> Apache Maven 3.0.5 (Red Hat 3.0.5-16) >>>>>>>> Maven home: /usr/share/maven >>>>>>>> Java version: 1.7.0_79, vendor: Oracle Corporation >>>>>>>> Java home: /opt/jdk1.7.0_79/jre >>>>>>>> Default locale: es_ES, platform encoding: UTF-8 >>>>>>>> OS name: "linux", version: "3.10.0-327.22.2.el7.x86_64", arch: >>>>>>>> "amd64", family: "unix" >>>>>>>> >>>>>>>> >>>>>>>> *Elena Darriba* >>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>> >>>>>>>> 2016-07-12 15:25 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: >>>>>>>> >>>>>>>>> for some weird reason default maven repository is not being tried >>>>>>>>> what is your maven version? >>>>>>>>> >>>>>>>>> On Tue, Jul 12, 2016 at 7:22 PM, Elena Darriba < >>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>> >>>>>>>>>> Hi Maxim, >>>>>>>>>> >>>>>>>>>> Thanks a lot for your comments. Documentation is not updated with >>>>>>>>>> maven... I am trying to compile it and it shows the following error: >>>>>>>>>> >>>>>>>>>> [INFO] Scanning for projects... >>>>>>>>>> [INFO] >>>>>>>>>> >>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>> ------------------------------------------ >>>>>>>>>> [INFO] Building red5sip 3.1-SNAPSHOT >>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>> ------------------------------------------ >>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>> ------------------------------------------ >>>>>>>>>> [INFO] BUILD FAILURE >>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>> ------------------------------------------ >>>>>>>>>> [INFO] Total time: 6.758s >>>>>>>>>> [INFO] Finished at: Tue Jul 12 15:15:01 CEST 2016 >>>>>>>>>> [INFO] Final Memory: 9M/22M >>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>> ------------------------------------------ >>>>>>>>>> [ERROR] Failed to execute goal on project red5sip: Could not >>>>>>>>>> resolve dependencies for project >>>>>>>>>> org.red5.sip:red5sip:jar:3.1-SNAPSHOT: >>>>>>>>>> Failed to collect dependencies for >>>>>>>>>> [org.red5:red5-client:jar:1.0.7-RELEASE >>>>>>>>>> (compile), javax.media:jmf:jar:2.1.1e (compile), >>>>>>>>>> commons-daemon:commons-daemon:jar:1.0.15 (compile), >>>>>>>>>> org.apache.openmeetings:openmeetings-db:jar:3.1.2 (compile), >>>>>>>>>> junit:junit:jar:4.12 (test)]: Failed to read artifact descriptor for >>>>>>>>>> org.apache.openmeetings:openmeetings-db:jar:3.1.2: Failure to >>>>>>>>>> find org.apache:apache:pom:18-SNAPSHOT in >>>>>>>>>> https://dl.bintray.com/openmeetings/maven was cached in the >>>>>>>>>> local repository, resolution will not be reattempted until the update >>>>>>>>>> interval of openmeetings-bintray has elapsed or updates are forced >>>>>>>>>> -> [Help >>>>>>>>>> 1] >>>>>>>>>> >>>>>>>>>> Thanks in advance. >>>>>>>>>> >>>>>>>>>> BR, >>>>>>>>>> Elena. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *Elena Darriba* >>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>> >>>>>>>>>> 2016-07-12 15:06 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com >>>>>>>>>> >: >>>>>>>>>> >>>>>>>>>>> you need to build using maven: >>>>>>>>>>> >>>>>>>>>>> mvn clean package >>>>>>>>>>> >>>>>>>>>>> On Tue, Jul 12, 2016 at 6:28 PM, Elena Darriba < >>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> I am compiling red5sip, not red5... >>>>>>>>>>>> >>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>> >>>>>>>>>>>> 2016-07-12 14:23 GMT+02:00 Juan Carrera <carre...@unizar.es>: >>>>>>>>>>>> >>>>>>>>>>>>> Hi, i'm compiling right now version 3.1.1 and as stated in >>>>>>>>>>>>> http://openmeetings.apache.org/BuildInstructions.html you >>>>>>>>>>>>> have to use maven instead of ant. >>>>>>>>>>>>> >>>>>>>>>>>>> BTW I don't know if its fixed in trunk, but i have edited >>>>>>>>>>>>> pom.xml because apache rat plugin snapshot is not available and >>>>>>>>>>>>> changed >>>>>>>>>>>>> line 917 to use version 0.,12: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> <groupId>org.apache.rat</groupId> >>>>>>>>>>>>> >>>>>>>>>>>>> <artifactId>apache-rat-plugin</artifactId> >>>>>>>>>>>>> >>>>>>>>>>>>> <version>0.12</version> >>>>>>>>>>>>> <configuration> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Kind regards >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> El 12/07/16 a las 13:56, Elena Darriba escribió: >>>>>>>>>>>>> >>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>> >>>>>>>>>>>>> Sorry, I am trying compiling master but there is not build.xml >>>>>>>>>>>>> file... how could I proceed? >>>>>>>>>>>>> >>>>>>>>>>>>> [root@centos7-1 red5sip]# git checkout master >>>>>>>>>>>>> Already on 'master' >>>>>>>>>>>>> [root@centos7-1 red5sip]# ls -l >>>>>>>>>>>>> total 8 >>>>>>>>>>>>> drwxr-xr-x 2 root root 24 jul 12 13:52 lib >>>>>>>>>>>>> drwxr-xr-x 2 root root 24 jun 29 10:22 log >>>>>>>>>>>>> drwxr-xr-x 4 root root 30 jun 29 09:57 out >>>>>>>>>>>>> -rw-r--r-- 1 root root 3577 jul 12 13:52 pom.xml >>>>>>>>>>>>> -rw-r--r-- 1 root root 123 jul 12 13:52 README.md >>>>>>>>>>>>> drwxr-xr-x 3 root root 17 jul 12 13:52 src >>>>>>>>>>>>> [root@centos7-1 red5sip]# ant >>>>>>>>>>>>> Buildfile: build.xml does not exist! >>>>>>>>>>>>> Build failed >>>>>>>>>>>>> [root@centos7-1 red5sip]# >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>> >>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>> Elena. >>>>>>>>>>>>> >>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | p: (+34) >>>>>>>>>>>>> 986 911 644 >>>>>>>>>>>>> >>>>>>>>>>>>> 2016-07-07 10:20 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>> solomax...@gmail.com>: >>>>>>>>>>>>> >>>>>>>>>>>>>> please use master for 3.1.x >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thu, Jul 7, 2016 at 1:56 PM, Elena Darriba < >>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Maxim, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The current version is 3.1.x, sorry for my mistake. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> What branch of red5sip must I to compile? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> BR, >>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>> e: elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2016-07-06 18:13 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I recently have fixed master branch to be buildable (for >>>>>>>>>>>>>>>> 3.1.x) >>>>>>>>>>>>>>>> Do you have any particular reason to use 3.0.x instead of >>>>>>>>>>>>>>>> 3.1.x? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Jul 6, 2016 at 10:00 PM, Elena Darriba < >>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> We are using OM 3.0 on CentOS 7.2, I will check the exact >>>>>>>>>>>>>>>>> version of OM. What branch should I compile? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> BR, >>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>>>> e: <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>> p: (+34) 986 911 644 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2016-07-06 16:12 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hello Elena, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> <https://github.com/openmeetings/red5sip/tree/red5sip_3.0> >>>>>>>>>>>>>>>>>> https://github.com/openmeetings/red5sip/tree/red5sip_3.0 >>>>>>>>>>>>>>>>>> branch is stored for historical reasons and might be not >>>>>>>>>>>>>>>>>> compilable >>>>>>>>>>>>>>>>>> what version of OM are you using? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Wed, Jun 29, 2016 at 7:16 PM, Elena Darriba < >>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I tried to compile src code from master (using >>>>>>>>>>>>>>>>>>> red5sip_3.0 branch) and I detected some errors. How can I >>>>>>>>>>>>>>>>>>> compile the new >>>>>>>>>>>>>>>>>>> version on master? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>>>>>> e: <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>> p: (+34) 986 911 644 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2016-05-14 9:58 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hello Elena, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I have finally installed Asterisk >>>>>>>>>>>>>>>>>>>> fixed red5sip: >>>>>>>>>>>>>>>>>>>> <https://github.com/openmeetings/red5sip/tree/master> >>>>>>>>>>>>>>>>>>>> https://github.com/openmeetings/red5sip/tree/master >>>>>>>>>>>>>>>>>>>> hopefully will be able to test everything together >>>>>>>>>>>>>>>>>>>> (hopefully LinPhone will work with Asterisk) >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Thu, May 12, 2016 at 12:48 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Have you any update about this issue? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>> p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2016-04-25 15:23 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> will try to do it this week >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> @Timur, maybe you can help? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Mon, Apr 25, 2016 at 5:59 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Please, could you tell me an aproximate date for >>>>>>>>>>>>>>>>>>>>>>> this review? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Thanks in advance, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>>>> p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2016-04-25 9:52 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hello All, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> sorry for keeping silence on the topic, >>>>>>>>>>>>>>>>>>>>>>>> Unfortunately I had no time to configure asterisk >>>>>>>>>>>>>>>>>>>>>>>> server (old one deceased) >>>>>>>>>>>>>>>>>>>>>>>> I'll write back as soon as I'll find time and check >>>>>>>>>>>>>>>>>>>>>>>> the issue >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Mon, Apr 25, 2016 at 1:29 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Dear Christos, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Install Asterisk is very easy, you can compile the >>>>>>>>>>>>>>>>>>>>>>>>> code so you can use Debian, Ubuntu or other OS. Also >>>>>>>>>>>>>>>>>>>>>>>>> I think you can >>>>>>>>>>>>>>>>>>>>>>>>> download it from repositories. I use the following >>>>>>>>>>>>>>>>>>>>>>>>> instructions: >>>>>>>>>>>>>>>>>>>>>>>>> <http://openmeetings.apache.org/red5sip-integration_3.0.html> >>>>>>>>>>>>>>>>>>>>>>>>> http://openmeetings.apache.org/red5sip-integra >>>>>>>>>>>>>>>>>>>>>>>>> tion_3.0.html >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Then, when Asterisk and red5sip are running, you >>>>>>>>>>>>>>>>>>>>>>>>> can set users and create a SIP room in OpenMeetings. >>>>>>>>>>>>>>>>>>>>>>>>> In my scenario, SIP >>>>>>>>>>>>>>>>>>>>>>>>> signaling is OK, and users can use SIP room, but >>>>>>>>>>>>>>>>>>>>>>>>> there is uncomfortable >>>>>>>>>>>>>>>>>>>>>>>>> noise and in some cases is impossible to listen the >>>>>>>>>>>>>>>>>>>>>>>>> other caller party. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>>>>>> p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> 2016-04-22 23:13 GMT+02:00 Christos Moustakakis < >>>>>>>>>>>>>>>>>>>>>>>>> <moustaka...@yahoo.gr>moustaka...@yahoo.gr>: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Dear Elena, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Could you please send me the instructions you >>>>>>>>>>>>>>>>>>>>>>>>>> follow to install the Asterisk in Debian because I >>>>>>>>>>>>>>>>>>>>>>>>>> have tried to install in >>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu 14.04 and I didn't manage? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Also, I would like to ask, when someone install >>>>>>>>>>>>>>>>>>>>>>>>>> the Asterisk could set any sip account? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>>>>>>> Christos. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hello: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> We have an scenario with OpenMeetings 3, red5sip >>>>>>>>>>>>>>>>>>>>>>>>>> and Asterisk installed on a Debian following the >>>>>>>>>>>>>>>>>>>>>>>>>> official instructions. SIP signaling is correct and >>>>>>>>>>>>>>>>>>>>>>>>>> calls established >>>>>>>>>>>>>>>>>>>>>>>>>> normally, but users listen noise during a call and >>>>>>>>>>>>>>>>>>>>>>>>>> sometimes is impossible >>>>>>>>>>>>>>>>>>>>>>>>>> to hear the other caller party. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> We are carrying tests using FreeSWITCH on >>>>>>>>>>>>>>>>>>>>>>>>>> different OS (RHEL, CentOS) instead Asterisk and >>>>>>>>>>>>>>>>>>>>>>>>>> also using older versions >>>>>>>>>>>>>>>>>>>>>>>>>> of OM but results are the same. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> RTP captured between Asterisk and Red5SIP sounds >>>>>>>>>>>>>>>>>>>>>>>>>> without noise. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Does anybody faced a situation like this? Could >>>>>>>>>>>>>>>>>>>>>>>>>> you please help us? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> WBR >>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> [image: Logotipo del servicio de informática y comunicaciones. >>>>>>>>>>>>> Universidad Zaragoza] >>>>>>>>>>>>> >>>>>>>>>>>>> *Juan Ramón Carrera Marcén * >>>>>>>>>>>>> * Área de aplicaciones* >>>>>>>>>>>>> Residencia de profesores >>>>>>>>>>>>> Pedro Cerbuna 12, 50009 Zaragoza >>>>>>>>>>>>> Tel. (34) 876553689 >>>>>>>>>>>>> carre...@unizar.es >>>>>>>>>>>>> >>>>>>>>>>>>> [image: unizar.es] >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> WBR >>>>>>>>>>> Maxim aka solomax >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> WBR >>>>>>>>> Maxim aka solomax >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>> >>>>> >>>> >>>> >>>> -- >>>> WBR >>>> Maxim aka solomax >>>> >>> >>> >> >> >> -- >> WBR >> Maxim aka solomax >> > > -- WBR Maxim aka solomax
