Do you have issues in case only OM users are in room? Can you connect to the same room as 2 free-node users (with no OM users), is there any noise in this case?
On Mon, Nov 7, 2016 at 9:33 PM, Alejandro Alonso < alejandro.alo...@quobis.com> wrote: > Hi Maxim, > > Thanks for your answer. > > The noise starts when someone else joins the conference and only the OM > user hears this noise. > > We have used different softphones and microphones/headphones with similar > results. In addition, we use this same equipment in other scenarios > (Hangout, Skype) and they work fine. > > Best Regards, > Alejandro > > *Alejandro Alonso Ferreira* > VoIP Systems Engineer @ Quobis <http://quobis.com/> | e: alejand > ro.alo...@quobis.com | p: (+34) 902 999 465 > — > This electronic message contains information which may be privileged or > confidential. The information is intended to be for the use of the > individual(s) or entity named above. > > 2016-11-07 14:19 GMT+01:00 Maxim Solodovnik <solomax...@gmail.com>: > >> Hello Alejandro, >> >> Am I right thinking you have clear sound without softphone connected to >> room? >> Can you try to use better hands free with your softphone? >> According to my observations good Mic/Headphones can significantly >> improve situation >> >> On Fri, Nov 4, 2016 at 9:03 PM, Alejandro Alonso < >> alejandro.alo...@quobis.com> wrote: >> >>> Hi Maxim, >>> >>> Finally we have been able to integrate OM3.1 (red5312) with FreeSWITCH >>> without using Asterisk. >>> >>> The scenario has improved a bit, now if the user is registered in a >>> softphone he can hear the conference audio correctly. >>> On the other hand, if the user is logged in the OM he still hears a lot >>> of noise, even when the other users are in silence. >>> >>> Do you have any idea about what could be causing this? >>> >>> Thanks in advance. >>> >>> Best Regards, >>> Alejandro >>> >>> *Alejandro Alonso Ferreira* >>> VoIP Systems Engineer @ Quobis <http://quobis.com/> | e: alejand >>> ro.alo...@quobis.com | p: (+34) 902 999 465 >>> — >>> This electronic message contains information which may be privileged or >>> confidential. The information is intended to be for the use of the >>> individual(s) or entity named above. >>> >>> 2016-10-11 18:53 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: >>> >>>> I would say SIP part haven't changed alot >>>> the main changes are: >>>> 1) change source location >>>> 2) change build system to maven >>>> 3) fix build >>>> I can fix issue after my vacation, you can help me to reproduce it :) >>>> >>>> On Tue, Oct 11, 2016 at 10:14 PM, Elena Darriba < >>>> elena.darr...@quobis.com> wrote: >>>> >>>>> Hello Maxim, >>>>> >>>>> Ok, thank you very much, we are doing several tests and new version >>>>> does not seem to connect well with freeswitch... we are reviewing it, >>>>> thanks. >>>>> >>>>> >>>>> BR, >>>>> Elena. >>>>> >>>>> *Elena Darriba* >>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>> >>>>> 2016-10-11 17:08 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: >>>>> >>>>>> Hello Elena, >>>>>> >>>>>> to be fair I don't know, I believe in case it was able to integrate >>>>>> it before it is possible to integrate it now ... >>>>>> >>>>>> On Tue, Oct 11, 2016 at 7:45 PM, Elena Darriba < >>>>>> elena.darr...@quobis.com> wrote: >>>>>> >>>>>>> Hello Maxim: >>>>>>> >>>>>>> Is it possible integrate OM3.1 (red5312) with FreeSWITCH without >>>>>>> Asterisk? Perhaps VoIP integration is it available only with Asterisk? >>>>>>> Older red5 versions works fine with FreeSWITCH, but the mentioned noise >>>>>>> appeared. >>>>>>> >>>>>>> >>>>>>> Thanks in advance. >>>>>>> >>>>>>> Best Regards, >>>>>>> Elena >>>>>>> >>>>>>> *Elena Darriba* >>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>> >>>>>>> 2016-07-12 15:48 GMT+02:00 Elena Darriba <elena.darr...@quobis.com>: >>>>>>> >>>>>>>> Ok, I test it as soon as possible, thanks! >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> *Elena Darriba* >>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>> >>>>>>>> 2016-07-12 15:45 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: >>>>>>>> >>>>>>>>> Maybe you can try latest maven? >>>>>>>>> >>>>>>>>> WBR, Maxim >>>>>>>>> (from mobile, sorry for the typos) >>>>>>>>> On Jul 12, 2016 19:30, "Elena Darriba" <elena.darr...@quobis.com> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> [root@centos7-1 ~]# mvn -v >>>>>>>>>> Apache Maven 3.0.5 (Red Hat 3.0.5-16) >>>>>>>>>> Maven home: /usr/share/maven >>>>>>>>>> Java version: 1.7.0_79, vendor: Oracle Corporation >>>>>>>>>> Java home: /opt/jdk1.7.0_79/jre >>>>>>>>>> Default locale: es_ES, platform encoding: UTF-8 >>>>>>>>>> OS name: "linux", version: "3.10.0-327.22.2.el7.x86_64", arch: >>>>>>>>>> "amd64", family: "unix" >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *Elena Darriba* >>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>> >>>>>>>>>> 2016-07-12 15:25 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com >>>>>>>>>> >: >>>>>>>>>> >>>>>>>>>>> for some weird reason default maven repository is not being tried >>>>>>>>>>> what is your maven version? >>>>>>>>>>> >>>>>>>>>>> On Tue, Jul 12, 2016 at 7:22 PM, Elena Darriba < >>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi Maxim, >>>>>>>>>>>> >>>>>>>>>>>> Thanks a lot for your comments. Documentation is not updated >>>>>>>>>>>> with maven... I am trying to compile it and it shows the following >>>>>>>>>>>> error: >>>>>>>>>>>> >>>>>>>>>>>> [INFO] Scanning for projects... >>>>>>>>>>>> [INFO] >>>>>>>>>>>> >>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>> [INFO] Building red5sip 3.1-SNAPSHOT >>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>> [INFO] BUILD FAILURE >>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>> [INFO] Total time: 6.758s >>>>>>>>>>>> [INFO] Finished at: Tue Jul 12 15:15:01 CEST 2016 >>>>>>>>>>>> [INFO] Final Memory: 9M/22M >>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>> [ERROR] Failed to execute goal on project red5sip: Could not >>>>>>>>>>>> resolve dependencies for project >>>>>>>>>>>> org.red5.sip:red5sip:jar:3.1-SNAPSHOT: >>>>>>>>>>>> Failed to collect dependencies for >>>>>>>>>>>> [org.red5:red5-client:jar:1.0.7-RELEASE >>>>>>>>>>>> (compile), javax.media:jmf:jar:2.1.1e (compile), >>>>>>>>>>>> commons-daemon:commons-daemon:jar:1.0.15 (compile), >>>>>>>>>>>> org.apache.openmeetings:openmeetings-db:jar:3.1.2 (compile), >>>>>>>>>>>> junit:junit:jar:4.12 (test)]: Failed to read artifact descriptor >>>>>>>>>>>> for >>>>>>>>>>>> org.apache.openmeetings:openmeetings-db:jar:3.1.2: Failure to >>>>>>>>>>>> find org.apache:apache:pom:18-SNAPSHOT in >>>>>>>>>>>> https://dl.bintray.com/openmeetings/maven was cached in the >>>>>>>>>>>> local repository, resolution will not be reattempted until the >>>>>>>>>>>> update >>>>>>>>>>>> interval of openmeetings-bintray has elapsed or updates are forced >>>>>>>>>>>> -> [Help >>>>>>>>>>>> 1] >>>>>>>>>>>> >>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>> >>>>>>>>>>>> BR, >>>>>>>>>>>> Elena. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>> >>>>>>>>>>>> 2016-07-12 15:06 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>> solomax...@gmail.com>: >>>>>>>>>>>> >>>>>>>>>>>>> you need to build using maven: >>>>>>>>>>>>> >>>>>>>>>>>>> mvn clean package >>>>>>>>>>>>> >>>>>>>>>>>>> On Tue, Jul 12, 2016 at 6:28 PM, Elena Darriba < >>>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> I am compiling red5sip, not red5... >>>>>>>>>>>>>> >>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2016-07-12 14:23 GMT+02:00 Juan Carrera <carre...@unizar.es>: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi, i'm compiling right now version 3.1.1 and as stated in >>>>>>>>>>>>>>> http://openmeetings.apache.org/BuildInstructions.html you >>>>>>>>>>>>>>> have to use maven instead of ant. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> BTW I don't know if its fixed in trunk, but i have edited >>>>>>>>>>>>>>> pom.xml because apache rat plugin snapshot is not available and >>>>>>>>>>>>>>> changed >>>>>>>>>>>>>>> line 917 to use version 0.,12: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <groupId>org.apache.rat</groupId> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <artifactId>apache-rat-plugin</artifactId> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <version>0.12</version> >>>>>>>>>>>>>>> <configuration> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Kind regards >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> El 12/07/16 a las 13:56, Elena Darriba escribió: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sorry, I am trying compiling master but there is not >>>>>>>>>>>>>>> build.xml file... how could I proceed? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> [root@centos7-1 red5sip]# git checkout master >>>>>>>>>>>>>>> Already on 'master' >>>>>>>>>>>>>>> [root@centos7-1 red5sip]# ls -l >>>>>>>>>>>>>>> total 8 >>>>>>>>>>>>>>> drwxr-xr-x 2 root root 24 jul 12 13:52 lib >>>>>>>>>>>>>>> drwxr-xr-x 2 root root 24 jun 29 10:22 log >>>>>>>>>>>>>>> drwxr-xr-x 4 root root 30 jun 29 09:57 out >>>>>>>>>>>>>>> -rw-r--r-- 1 root root 3577 jul 12 13:52 pom.xml >>>>>>>>>>>>>>> -rw-r--r-- 1 root root 123 jul 12 13:52 README.md >>>>>>>>>>>>>>> drwxr-xr-x 3 root root 17 jul 12 13:52 src >>>>>>>>>>>>>>> [root@centos7-1 red5sip]# ant >>>>>>>>>>>>>>> Buildfile: build.xml does not exist! >>>>>>>>>>>>>>> Build failed >>>>>>>>>>>>>>> [root@centos7-1 red5sip]# >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>> e: <elena.darr...@quobis.com>elena.darr...@quobis.com | p: >>>>>>>>>>>>>>> (+34) >>>>>>>>>>>>>>> 986 911 644 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2016-07-07 10:20 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>> solomax...@gmail.com>: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> please use master for 3.1.x >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Thu, Jul 7, 2016 at 1:56 PM, Elena Darriba < >>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi Maxim, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> The current version is 3.1.x, sorry for my mistake. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> What branch of red5sip must I to compile? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> BR, >>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>>>> e: elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2016-07-06 18:13 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I recently have fixed master branch to be buildable (for >>>>>>>>>>>>>>>>>> 3.1.x) >>>>>>>>>>>>>>>>>> Do you have any particular reason to use 3.0.x instead of >>>>>>>>>>>>>>>>>> 3.1.x? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Wed, Jul 6, 2016 at 10:00 PM, Elena Darriba < >>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> We are using OM 3.0 on CentOS 7.2, I will check the >>>>>>>>>>>>>>>>>>> exact version of OM. What branch should I compile? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> BR, >>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>>>>>> e: <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>> p: (+34) 986 911 644 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2016-07-06 16:12 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hello Elena, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> <https://github.com/openmeetings/red5sip/tree/red5sip_3.0> >>>>>>>>>>>>>>>>>>>> https://github.com/openmeeting >>>>>>>>>>>>>>>>>>>> s/red5sip/tree/red5sip_3.0 branch is stored for >>>>>>>>>>>>>>>>>>>> historical reasons and might be not compilable >>>>>>>>>>>>>>>>>>>> what version of OM are you using? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Wed, Jun 29, 2016 at 7:16 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I tried to compile src code from master (using >>>>>>>>>>>>>>>>>>>>> red5sip_3.0 branch) and I detected some errors. How can I >>>>>>>>>>>>>>>>>>>>> compile the new >>>>>>>>>>>>>>>>>>>>> version on master? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>> p: (+34) 986 911 644 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2016-05-14 9:58 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hello Elena, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I have finally installed Asterisk >>>>>>>>>>>>>>>>>>>>>> fixed red5sip: >>>>>>>>>>>>>>>>>>>>>> <https://github.com/openmeetings/red5sip/tree/master> >>>>>>>>>>>>>>>>>>>>>> https://github.com/openmeetings/red5sip/tree/master >>>>>>>>>>>>>>>>>>>>>> hopefully will be able to test everything together >>>>>>>>>>>>>>>>>>>>>> (hopefully LinPhone will work with Asterisk) >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Thu, May 12, 2016 at 12:48 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Have you any update about this issue? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>>>> p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 2016-04-25 15:23 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> will try to do it this week >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> @Timur, maybe you can help? >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Mon, Apr 25, 2016 at 5:59 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Please, could you tell me an aproximate date for >>>>>>>>>>>>>>>>>>>>>>>>> this review? >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>>>>>> p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> 2016-04-25 9:52 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hello All, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> sorry for keeping silence on the topic, >>>>>>>>>>>>>>>>>>>>>>>>>> Unfortunately I had no time to configure asterisk >>>>>>>>>>>>>>>>>>>>>>>>>> server (old one deceased) >>>>>>>>>>>>>>>>>>>>>>>>>> I'll write back as soon as I'll find time and >>>>>>>>>>>>>>>>>>>>>>>>>> check the issue >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Apr 25, 2016 at 1:29 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Christos, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Install Asterisk is very easy, you can compile >>>>>>>>>>>>>>>>>>>>>>>>>>> the code so you can use Debian, Ubuntu or other OS. >>>>>>>>>>>>>>>>>>>>>>>>>>> Also I think you can >>>>>>>>>>>>>>>>>>>>>>>>>>> download it from repositories. I use the following >>>>>>>>>>>>>>>>>>>>>>>>>>> instructions: >>>>>>>>>>>>>>>>>>>>>>>>>>> <http://openmeetings.apache.org/red5sip-integration_3.0.html> >>>>>>>>>>>>>>>>>>>>>>>>>>> http://openmeetings.apache.org/red5sip-integra >>>>>>>>>>>>>>>>>>>>>>>>>>> tion_3.0.html >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Then, when Asterisk and red5sip are running, you >>>>>>>>>>>>>>>>>>>>>>>>>>> can set users and create a SIP room in >>>>>>>>>>>>>>>>>>>>>>>>>>> OpenMeetings. In my scenario, SIP >>>>>>>>>>>>>>>>>>>>>>>>>>> signaling is OK, and users can use SIP room, but >>>>>>>>>>>>>>>>>>>>>>>>>>> there is uncomfortable >>>>>>>>>>>>>>>>>>>>>>>>>>> noise and in some cases is impossible to listen the >>>>>>>>>>>>>>>>>>>>>>>>>>> other caller party. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> 2016-04-22 23:13 GMT+02:00 Christos Moustakakis >>>>>>>>>>>>>>>>>>>>>>>>>>> < <moustaka...@yahoo.gr>moustaka...@yahoo.gr>: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Elena, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Could you please send me the instructions you >>>>>>>>>>>>>>>>>>>>>>>>>>>> follow to install the Asterisk in Debian because I >>>>>>>>>>>>>>>>>>>>>>>>>>>> have tried to install in >>>>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu 14.04 and I didn't manage? >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Also, I would like to ask, when someone install >>>>>>>>>>>>>>>>>>>>>>>>>>>> the Asterisk could set any sip account? >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>>>>>>>>> Christos. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> We have an scenario with OpenMeetings 3, >>>>>>>>>>>>>>>>>>>>>>>>>>>> red5sip and Asterisk installed on a Debian >>>>>>>>>>>>>>>>>>>>>>>>>>>> following the >>>>>>>>>>>>>>>>>>>>>>>>>>>> official instructions. SIP signaling is correct >>>>>>>>>>>>>>>>>>>>>>>>>>>> and calls established >>>>>>>>>>>>>>>>>>>>>>>>>>>> normally, but users listen noise during a call and >>>>>>>>>>>>>>>>>>>>>>>>>>>> sometimes is impossible >>>>>>>>>>>>>>>>>>>>>>>>>>>> to hear the other caller party. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> We are carrying tests using FreeSWITCH on >>>>>>>>>>>>>>>>>>>>>>>>>>>> different OS (RHEL, CentOS) instead Asterisk and >>>>>>>>>>>>>>>>>>>>>>>>>>>> also using older versions >>>>>>>>>>>>>>>>>>>>>>>>>>>> of OM but results are the same. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> RTP captured between Asterisk and Red5SIP >>>>>>>>>>>>>>>>>>>>>>>>>>>> sounds without noise. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Does anybody faced a situation like this? Could >>>>>>>>>>>>>>>>>>>>>>>>>>>> you please help us? >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> [image: Logotipo del servicio de informática y >>>>>>>>>>>>>>> comunicaciones. Universidad Zaragoza] >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> *Juan Ramón Carrera Marcén * >>>>>>>>>>>>>>> * Área de aplicaciones* >>>>>>>>>>>>>>> Residencia de profesores >>>>>>>>>>>>>>> Pedro Cerbuna 12, 50009 Zaragoza >>>>>>>>>>>>>>> Tel. (34) 876553689 >>>>>>>>>>>>>>> carre...@unizar.es >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> [image: unizar.es] >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> WBR >>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> WBR >>>>>>>>>>> Maxim aka solomax >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> WBR >>>>>> Maxim aka solomax >>>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> WBR >>>> Maxim aka solomax >>>> >>> >>> >> >> >> -- >> WBR >> Maxim aka solomax >> > > -- WBR Maxim aka solomax
