Hello Alejandro, I'm extremely sorry for such late response, just was able to set everything up and test. The sound quality was good. There were 2 issues:
1) SIP integration seems to be broken in latest release 3.2.1 (should be fixed in latest nightly build: https://builds.apache.org/view/M-R/view/OpenMeetings/job/Openmeetings%203.3.x/ ) 2) We had bad sound quality and it was caused by PulseAudio Equalizer. The sound was good as soon EQ was turned OFF Hope I have answered not too late :) On Tue, Mar 28, 2017 at 12:20 AM, Maxim Solodovnik <solomax...@gmail.com> wrote: > That is no good :( > this most probably mean this is red5sip issue :( > Will try to find some time and reproduce this issue locally > > On Mon, Mar 27, 2017 at 11:48 PM, Alejandro Alonso < > alejandro.alo...@quobis.com> wrote: > >> Hi Maxim, >> >> I hope you are doing well. >> >> When the two users are in the same place the audio is ok. We tested calls >> with both of them logged in the OM room and another one with two users in >> softphones. >> >> The noise is only present when there is a user in the OM room and other >> using a softphone. Could it be caused by some audio conversion? >> >> We have assigned more resources to the host but the noise is still there. >> >> Do you have any other idea? >> >> Thanks, >> Alejandro >> >> *Alejandro Alonso Ferreira* >> VoIP Systems Engineer @ Quobis <http://quobis.com/> | e: alejand >> ro.alo...@quobis.com | p: (+34) 902 999 465 >> — >> This electronic message contains information which may be privileged or >> confidential. The information is intended to be for the use of the >> individual(s) or entity named above. >> >> 2016-11-07 17:08 GMT+01:00 Maxim Solodovnik <solomax...@gmail.com>: >> >>> Do you have issues in case only OM users are in room? >>> Can you connect to the same room as 2 free-node users (with no OM >>> users), is there any noise in this case? >>> >>> On Mon, Nov 7, 2016 at 9:33 PM, Alejandro Alonso < >>> alejandro.alo...@quobis.com> wrote: >>> >>>> Hi Maxim, >>>> >>>> Thanks for your answer. >>>> >>>> The noise starts when someone else joins the conference and only the OM >>>> user hears this noise. >>>> >>>> We have used different softphones and microphones/headphones with >>>> similar results. In addition, we use this same equipment in other scenarios >>>> (Hangout, Skype) and they work fine. >>>> >>>> Best Regards, >>>> Alejandro >>>> >>>> *Alejandro Alonso Ferreira* >>>> VoIP Systems Engineer @ Quobis <http://quobis.com/> | e: alejand >>>> ro.alo...@quobis.com | p: (+34) 902 999 465 >>>> — >>>> This electronic message contains information which may be privileged or >>>> confidential. The information is intended to be for the use of the >>>> individual(s) or entity named above. >>>> >>>> 2016-11-07 14:19 GMT+01:00 Maxim Solodovnik <solomax...@gmail.com>: >>>> >>>>> Hello Alejandro, >>>>> >>>>> Am I right thinking you have clear sound without softphone connected >>>>> to room? >>>>> Can you try to use better hands free with your softphone? >>>>> According to my observations good Mic/Headphones can significantly >>>>> improve situation >>>>> >>>>> On Fri, Nov 4, 2016 at 9:03 PM, Alejandro Alonso < >>>>> alejandro.alo...@quobis.com> wrote: >>>>> >>>>>> Hi Maxim, >>>>>> >>>>>> Finally we have been able to integrate OM3.1 (red5312) with >>>>>> FreeSWITCH without using Asterisk. >>>>>> >>>>>> The scenario has improved a bit, now if the user is registered in a >>>>>> softphone he can hear the conference audio correctly. >>>>>> On the other hand, if the user is logged in the OM he still hears a >>>>>> lot of noise, even when the other users are in silence. >>>>>> >>>>>> Do you have any idea about what could be causing this? >>>>>> >>>>>> Thanks in advance. >>>>>> >>>>>> Best Regards, >>>>>> Alejandro >>>>>> >>>>>> *Alejandro Alonso Ferreira* >>>>>> VoIP Systems Engineer @ Quobis <http://quobis.com/> | e: alejand >>>>>> ro.alo...@quobis.com | p: (+34) 902 999 465 >>>>>> — >>>>>> This electronic message contains information which may be privileged >>>>>> or confidential. The information is intended to be for the use of the >>>>>> individual(s) or entity named above. >>>>>> >>>>>> 2016-10-11 18:53 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: >>>>>> >>>>>>> I would say SIP part haven't changed alot >>>>>>> the main changes are: >>>>>>> 1) change source location >>>>>>> 2) change build system to maven >>>>>>> 3) fix build >>>>>>> I can fix issue after my vacation, you can help me to reproduce it :) >>>>>>> >>>>>>> On Tue, Oct 11, 2016 at 10:14 PM, Elena Darriba < >>>>>>> elena.darr...@quobis.com> wrote: >>>>>>> >>>>>>>> Hello Maxim, >>>>>>>> >>>>>>>> Ok, thank you very much, we are doing several tests and new version >>>>>>>> does not seem to connect well with freeswitch... we are reviewing it, >>>>>>>> thanks. >>>>>>>> >>>>>>>> >>>>>>>> BR, >>>>>>>> Elena. >>>>>>>> >>>>>>>> *Elena Darriba* >>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>> >>>>>>>> 2016-10-11 17:08 GMT+02:00 Maxim Solodovnik <solomax...@gmail.com>: >>>>>>>> >>>>>>>>> Hello Elena, >>>>>>>>> >>>>>>>>> to be fair I don't know, I believe in case it was able to >>>>>>>>> integrate it before it is possible to integrate it now ... >>>>>>>>> >>>>>>>>> On Tue, Oct 11, 2016 at 7:45 PM, Elena Darriba < >>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>> >>>>>>>>>> Hello Maxim: >>>>>>>>>> >>>>>>>>>> Is it possible integrate OM3.1 (red5312) with FreeSWITCH without >>>>>>>>>> Asterisk? Perhaps VoIP integration is it available only with >>>>>>>>>> Asterisk? >>>>>>>>>> Older red5 versions works fine with FreeSWITCH, but the mentioned >>>>>>>>>> noise >>>>>>>>>> appeared. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Thanks in advance. >>>>>>>>>> >>>>>>>>>> Best Regards, >>>>>>>>>> Elena >>>>>>>>>> >>>>>>>>>> *Elena Darriba* >>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>> >>>>>>>>>> 2016-07-12 15:48 GMT+02:00 Elena Darriba < >>>>>>>>>> elena.darr...@quobis.com>: >>>>>>>>>> >>>>>>>>>>> Ok, I test it as soon as possible, thanks! >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> *Elena Darriba* >>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>> >>>>>>>>>>> 2016-07-12 15:45 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>> solomax...@gmail.com>: >>>>>>>>>>> >>>>>>>>>>>> Maybe you can try latest maven? >>>>>>>>>>>> >>>>>>>>>>>> WBR, Maxim >>>>>>>>>>>> (from mobile, sorry for the typos) >>>>>>>>>>>> On Jul 12, 2016 19:30, "Elena Darriba" < >>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> [root@centos7-1 ~]# mvn -v >>>>>>>>>>>>> Apache Maven 3.0.5 (Red Hat 3.0.5-16) >>>>>>>>>>>>> Maven home: /usr/share/maven >>>>>>>>>>>>> Java version: 1.7.0_79, vendor: Oracle Corporation >>>>>>>>>>>>> Java home: /opt/jdk1.7.0_79/jre >>>>>>>>>>>>> Default locale: es_ES, platform encoding: UTF-8 >>>>>>>>>>>>> OS name: "linux", version: "3.10.0-327.22.2.el7.x86_64", arch: >>>>>>>>>>>>> "amd64", family: "unix" >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | e: >>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>>> >>>>>>>>>>>>> 2016-07-12 15:25 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>> solomax...@gmail.com>: >>>>>>>>>>>>> >>>>>>>>>>>>>> for some weird reason default maven repository is not being >>>>>>>>>>>>>> tried >>>>>>>>>>>>>> what is your maven version? >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, Jul 12, 2016 at 7:22 PM, Elena Darriba < >>>>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Maxim, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks a lot for your comments. Documentation is not updated >>>>>>>>>>>>>>> with maven... I am trying to compile it and it shows the >>>>>>>>>>>>>>> following error: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> [INFO] Scanning for projects... >>>>>>>>>>>>>>> [INFO] >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>>>>> [INFO] Building red5sip 3.1-SNAPSHOT >>>>>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>>>>> [INFO] BUILD FAILURE >>>>>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>>>>> [INFO] Total time: 6.758s >>>>>>>>>>>>>>> [INFO] Finished at: Tue Jul 12 15:15:01 CEST 2016 >>>>>>>>>>>>>>> [INFO] Final Memory: 9M/22M >>>>>>>>>>>>>>> [INFO] ------------------------------ >>>>>>>>>>>>>>> ------------------------------------------ >>>>>>>>>>>>>>> [ERROR] Failed to execute goal on project red5sip: Could not >>>>>>>>>>>>>>> resolve dependencies for project >>>>>>>>>>>>>>> org.red5.sip:red5sip:jar:3.1-SNAPSHOT: >>>>>>>>>>>>>>> Failed to collect dependencies for >>>>>>>>>>>>>>> [org.red5:red5-client:jar:1.0.7-RELEASE >>>>>>>>>>>>>>> (compile), javax.media:jmf:jar:2.1.1e (compile), >>>>>>>>>>>>>>> commons-daemon:commons-daemon:jar:1.0.15 (compile), >>>>>>>>>>>>>>> org.apache.openmeetings:openmeetings-db:jar:3.1.2 >>>>>>>>>>>>>>> (compile), junit:junit:jar:4.12 (test)]: Failed to read >>>>>>>>>>>>>>> artifact descriptor >>>>>>>>>>>>>>> for org.apache.openmeetings:openmeetings-db:jar:3.1.2: >>>>>>>>>>>>>>> Failure to find org.apache:apache:pom:18-SNAPSHOT in >>>>>>>>>>>>>>> https://dl.bintray.com/openmeetings/maven was cached in the >>>>>>>>>>>>>>> local repository, resolution will not be reattempted until the >>>>>>>>>>>>>>> update >>>>>>>>>>>>>>> interval of openmeetings-bintray has elapsed or updates are >>>>>>>>>>>>>>> forced -> [Help >>>>>>>>>>>>>>> 1] >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> BR, >>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>> e: elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2016-07-12 15:06 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>> solomax...@gmail.com>: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> you need to build using maven: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> mvn clean package >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Tue, Jul 12, 2016 at 6:28 PM, Elena Darriba < >>>>>>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I am compiling red5sip, not red5... >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>>>> e: elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2016-07-12 14:23 GMT+02:00 Juan Carrera < >>>>>>>>>>>>>>>>> carre...@unizar.es>: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi, i'm compiling right now version 3.1.1 and as stated >>>>>>>>>>>>>>>>>> in http://openmeetings.apache.org/BuildInstructions.html >>>>>>>>>>>>>>>>>> you have to use maven instead of ant. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> BTW I don't know if its fixed in trunk, but i have edited >>>>>>>>>>>>>>>>>> pom.xml because apache rat plugin snapshot is not available >>>>>>>>>>>>>>>>>> and changed >>>>>>>>>>>>>>>>>> line 917 to use version 0.,12: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> <groupId>org.apache.rat</groupId> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> <artifactId>apache-rat-plugin</artifactId> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> <version>0.12</version> >>>>>>>>>>>>>>>>>> <configuration> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Kind regards >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> El 12/07/16 a las 13:56, Elena Darriba escribió: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Sorry, I am trying compiling master but there is not >>>>>>>>>>>>>>>>>> build.xml file... how could I proceed? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> [root@centos7-1 red5sip]# git checkout master >>>>>>>>>>>>>>>>>> Already on 'master' >>>>>>>>>>>>>>>>>> [root@centos7-1 red5sip]# ls -l >>>>>>>>>>>>>>>>>> total 8 >>>>>>>>>>>>>>>>>> drwxr-xr-x 2 root root 24 jul 12 13:52 lib >>>>>>>>>>>>>>>>>> drwxr-xr-x 2 root root 24 jun 29 10:22 log >>>>>>>>>>>>>>>>>> drwxr-xr-x 4 root root 30 jun 29 09:57 out >>>>>>>>>>>>>>>>>> -rw-r--r-- 1 root root 3577 jul 12 13:52 pom.xml >>>>>>>>>>>>>>>>>> -rw-r--r-- 1 root root 123 jul 12 13:52 README.md >>>>>>>>>>>>>>>>>> drwxr-xr-x 3 root root 17 jul 12 13:52 src >>>>>>>>>>>>>>>>>> [root@centos7-1 red5sip]# ant >>>>>>>>>>>>>>>>>> Buildfile: build.xml does not exist! >>>>>>>>>>>>>>>>>> Build failed >>>>>>>>>>>>>>>>>> [root@centos7-1 red5sip]# >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>>>>> e: <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>> p: (+34) 986 911 644 >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> 2016-07-07 10:20 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>> solomax...@gmail.com>: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> please use master for 3.1.x >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Thu, Jul 7, 2016 at 1:56 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi Maxim, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> The current version is 3.1.x, sorry for my mistake. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> What branch of red5sip must I to compile? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> BR, >>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis <http://www.quobis.com/> | >>>>>>>>>>>>>>>>>>>> e: elena.darr...@quobis.com | p: (+34) 986 911 644 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> 2016-07-06 18:13 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I recently have fixed master branch to be buildable >>>>>>>>>>>>>>>>>>>>> (for 3.1.x) >>>>>>>>>>>>>>>>>>>>> Do you have any particular reason to use 3.0.x instead >>>>>>>>>>>>>>>>>>>>> of 3.1.x? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Wed, Jul 6, 2016 at 10:00 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> We are using OM 3.0 on CentOS 7.2, I will check the >>>>>>>>>>>>>>>>>>>>>> exact version of OM. What branch should I compile? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> BR, >>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>>> p: (+34) 986 911 644 >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> 2016-07-06 16:12 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hello Elena, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> <https://github.com/openmeetings/red5sip/tree/red5sip_3.0> >>>>>>>>>>>>>>>>>>>>>>> https://github.com/openmeeting >>>>>>>>>>>>>>>>>>>>>>> s/red5sip/tree/red5sip_3.0 branch is stored for >>>>>>>>>>>>>>>>>>>>>>> historical reasons and might be not compilable >>>>>>>>>>>>>>>>>>>>>>> what version of OM are you using? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Wed, Jun 29, 2016 at 7:16 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I tried to compile src code from master (using >>>>>>>>>>>>>>>>>>>>>>>> red5sip_3.0 branch) and I detected some errors. How >>>>>>>>>>>>>>>>>>>>>>>> can I compile the new >>>>>>>>>>>>>>>>>>>>>>>> version on master? >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com | >>>>>>>>>>>>>>>>>>>>>>>> p: (+34) 986 911 644 >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> 2016-05-14 9:58 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Hello Elena, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> I have finally installed Asterisk >>>>>>>>>>>>>>>>>>>>>>>>> fixed red5sip: >>>>>>>>>>>>>>>>>>>>>>>>> <https://github.com/openmeetings/red5sip/tree/master> >>>>>>>>>>>>>>>>>>>>>>>>> https://github.com/op >>>>>>>>>>>>>>>>>>>>>>>>> enmeetings/red5sip/tree/master >>>>>>>>>>>>>>>>>>>>>>>>> hopefully will be able to test everything together >>>>>>>>>>>>>>>>>>>>>>>>> (hopefully LinPhone will work with Asterisk) >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Thu, May 12, 2016 at 12:48 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com>elena.darr...@quobis.com >>>>>>>>>>>>>>>>>>>>>>>>> > wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Have you any update about this issue? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> 2016-04-25 15:23 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> will try to do it this week >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> @Timur, maybe you can help? >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Apr 25, 2016 at 5:59 PM, Elena Darriba < >>>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Maxim, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Please, could you tell me an aproximate date >>>>>>>>>>>>>>>>>>>>>>>>>>>> for this review? >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance, >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 902 999 465 >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> 2016-04-25 9:52 GMT+02:00 Maxim Solodovnik < >>>>>>>>>>>>>>>>>>>>>>>>>>>> <solomax...@gmail.com>solomax...@gmail.com>: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello All, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> sorry for keeping silence on the topic, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Unfortunately I had no time to configure >>>>>>>>>>>>>>>>>>>>>>>>>>>>> asterisk server (old one deceased) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'll write back as soon as I'll find time and >>>>>>>>>>>>>>>>>>>>>>>>>>>>> check the issue >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Apr 25, 2016 at 1:29 PM, Elena Darriba >>>>>>>>>>>>>>>>>>>>>>>>>>>>> < <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Christos, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Install Asterisk is very easy, you can >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> compile the code so you can use Debian, Ubuntu >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or other OS. Also I think >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you can download it from repositories. I use the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> following instructions: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <http://openmeetings.apache.org/red5sip-integration_3.0.html> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://openmeeti >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ngs.apache.org/red5sip-integration_3.0.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then, when Asterisk and red5sip are running, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you can set users and create a SIP room in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OpenMeetings. In my scenario, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SIP signaling is OK, and users can use SIP room, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> but there is uncomfortable >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> noise and in some cases is impossible to listen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the other caller party. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 902 999 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 465 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2016-04-22 23:13 GMT+02:00 Christos >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Moustakakis < <moustaka...@yahoo.gr> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> moustaka...@yahoo.gr>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dear Elena, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Could you please send me the instructions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you follow to install the Asterisk in Debian >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> because I have tried to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install in Ubuntu 14.04 and I didn't manage? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Also, I would like to ask, when someone >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install the Asterisk could set any sip account? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christos. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have an scenario with OpenMeetings 3, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> red5sip and Asterisk installed on a Debian >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> following the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> official instructions. SIP signaling is correct >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and calls established >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> normally, but users listen noise during a call >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and sometimes is impossible >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to hear the other caller party. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We are carrying tests using FreeSWITCH on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different OS (RHEL, CentOS) instead Asterisk >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and also using older versions >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of OM but results are the same. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> RTP captured between Asterisk and Red5SIP >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sounds without noise. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Does anybody faced a situation like this? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Could you please help us? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Elena. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Elena Darriba* >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VoIP Systems Engineer @ Quobis >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.quobis.com/> | e: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <elena.darr...@quobis.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elena.darr...@quobis.com | p: (+34) 902 999 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 465 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> [image: Logotipo del servicio de informática y >>>>>>>>>>>>>>>>>> comunicaciones. Universidad Zaragoza] >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> *Juan Ramón Carrera Marcén * >>>>>>>>>>>>>>>>>> * Área de aplicaciones* >>>>>>>>>>>>>>>>>> Residencia de profesores >>>>>>>>>>>>>>>>>> Pedro Cerbuna 12, 50009 Zaragoza >>>>>>>>>>>>>>>>>> Tel. (34) 876553689 >>>>>>>>>>>>>>>>>> carre...@unizar.es >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> [image: unizar.es] >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> WBR >>>>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> WBR >>>>>>>>>>>>>> Maxim aka solomax >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> WBR >>>>>>>>> Maxim aka solomax >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> WBR >>>>>>> Maxim aka solomax >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> WBR >>>>> Maxim aka solomax >>>>> >>>> >>>> >>> >>> >>> -- >>> WBR >>> Maxim aka solomax >>> >> >> > > > -- > WBR > Maxim aka solomax > -- WBR Maxim aka solomax
