u-boot  

Messages by Thread

• • Re: [PATCH v4 1/5] efi: stub: Define debug uart functions only if CONFIG_DEBUG_UART is enabled Quentin Schulz
  • Re: [PATCH v4 1/5] efi: stub: Define debug uart functions only if CONFIG_DEBUG_UART is enabled Tom Rini
  • Re: [PATCH v4 1/5] efi: stub: Define debug uart functions only if CONFIG_DEBUG_UART is enabled Quentin Schulz
  • Re: [PATCH v4 1/5] efi: stub: Define debug uart functions only if CONFIG_DEBUG_UART is enabled Tom Rini
  • [PATCH v4 2/5] debug_uart: Replace debug functions with dummies if CONFIG_DEBUG_UART is not set Lukasz Czechowski
  • Re: [PATCH v4 2/5] debug_uart: Replace debug functions with dummies if CONFIG_DEBUG_UART is not set Quentin Schulz
  • Re: [PATCH v4 2/5] debug_uart: Replace debug functions with dummies if CONFIG_DEBUG_UART is not set Łukasz Czechowski
  • Re: [PATCH v4 2/5] debug_uart: Replace debug functions with dummies if CONFIG_DEBUG_UART is not set Quentin Schulz
  • Re: [PATCH v4 2/5] debug_uart: Replace debug functions with dummies if CONFIG_DEBUG_UART is not set Łukasz Czechowski
  • Re: [PATCH v4 2/5] debug_uart: Replace debug functions with dummies if CONFIG_DEBUG_UART is not set Tom Rini
  • [PATCH v4 4/5] rockchip: px30: Weaken dependency TPL/SPL serial Lukasz Czechowski
  • [PATCH v4 5/5] rockchip: px30: Fix hard dependency to DEBUG_UART_BOARD_INIT Lukasz Czechowski
  • [PATCH v4 3/5] ram: rockchip: Fix dependency of RAM_ROCKCHIP_DEBUG Lukasz Czechowski
  • Re: [PATCH v4 3/5] ram: rockchip: Fix dependency of RAM_ROCKCHIP_DEBUG Quentin Schulz
• [PATCH] binman: add atf-bl1 to etypes Bryan Brattlof
  • Re: [PATCH] binman: add atf-bl1 to etypes Simon Glass
  • Re: [PATCH] binman: add atf-bl1 to etypes Tom Rini
• [PATCH v3 1/2] arm: imx: imx8m: soc: fix the macro name Dario Binacchi
  • [PATCH v3 2/2] arm: imx: imx8m: soc: replace ifdef by IS_ENABLED() Dario Binacchi
  • RE: [PATCH v3 2/2] arm: imx: imx8m: soc: replace ifdef by IS_ENABLED() Peng Fan
  • RE: [PATCH v3 1/2] arm: imx: imx8m: soc: fix the macro name Peng Fan
  • Re: [PATCH v3 1/2] arm: imx: imx8m: soc: fix the macro name Fabio Estevam
• Re: [PATCH RFC] fit: allow to specify RSAPSS padding salt length magic value Quentin Schulz
• [RFC PATCH v2 0/4] Restore imx8mn_bsh_smm_s2 properly booting Dario Binacchi
  • [RFC PATCH v2 1/4] spl: Kconfig: support U-Boot load from raw NAND Dario Binacchi
  • [RFC PATCH v2 3/4] configs: imx8mn_bsh_smm_s2: load U-Boot from raw NAND Dario Binacchi
  • [RFC PATCH v2 4/4] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Dario Binacchi
  • [RFC PATCH v2 2/4] imx: spl_imx_romapi: support raw NAND sector Dario Binacchi
• [PATCH] ifwitool: fix memory leak in ifwi_dir_extract ant . v . moryakov
• [PATCH v2 1/2] arm: imx: imx8m: soc: fix the macro name Dario Binacchi
  • [PATCH v2 2/2] arm: imx: imx8m: soc: replace ifdef by IS_ENABLED() Dario Binacchi
  • Re: [PATCH v2 2/2] arm: imx: imx8m: soc: replace ifdef by IS_ENABLED() Quentin Schulz
  • Re: [PATCH v2 2/2] arm: imx: imx8m: soc: replace ifdef by IS_ENABLED() Tom Rini
• [RFC PATCH 0/3] Restore imx8mn_bsh_smm_s2 properly booting Dario Binacchi
  • [RFC PATCH 1/3] spl: Kconfig: allow to enable SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR for i.MX8M Dario Binacchi
  • Re: [RFC PATCH 1/3] spl: Kconfig: allow to enable SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR for i.MX8M Quentin Schulz
  • Re: [RFC PATCH 1/3] spl: Kconfig: allow to enable SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR for i.MX8M Tom Rini
  • Re: [RFC PATCH 1/3] spl: Kconfig: allow to enable SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR for i.MX8M Quentin Schulz
  • [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Dario Binacchi
  • Re: [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Fabio Estevam
  • Re: [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Michael Nazzareno Trimarchi
  • Re: [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Fabio Estevam
  • Re: [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Michael Nazzareno Trimarchi
  • Re: [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Fabio Estevam
  • Re: [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Michael Nazzareno Trimarchi
  • Re: [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Michael Nazzareno Trimarchi
  • Re: [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Fabio Estevam
  • Re: [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Michael Nazzareno Trimarchi
  • Re: [RFC PATCH 3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2 Fabio Estevam
  • [RFC PATCH 2/3] configs: imx8mn_bsh_smm_s2: restore CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR Dario Binacchi
• [PATCH 0/4] Remove clocks from R5 dtsi for missed boards. Manorit Chawdhry
  • [PATCH 1/4] arm: dts: k3-am625-beagleplay-r5*: Remove clocks from main_timer0 Manorit Chawdhry
  • [PATCH 4/4] arm: dts: k3-am62a7-phycore-r5*: Remove clocks from main_timer0 Manorit Chawdhry
  • Re: [PATCH 4/4] arm: dts: k3-am62a7-phycore-r5*: Remove clocks from main_timer0 Wadim Egorov
  • [PATCH 3/4] arm: dts: k3-am625-verdin-r5*: Remove clocks from main_timer0 Manorit Chawdhry
  • Re: [PATCH 3/4] arm: dts: k3-am625-verdin-r5*: Remove clocks from main_timer0 Francesco Dolcini
  • [PATCH 2/4] arm: dts: k3-am625-phycore-r5*: Remove clocks from main_timer0 Manorit Chawdhry
  • Re: [PATCH 2/4] arm: dts: k3-am625-phycore-r5*: Remove clocks from main_timer0 Wadim Egorov
  • Re: [PATCH 0/4] Remove clocks from R5 dtsi for missed boards. Tom Rini
• [PATCH 0/2] Print Reset Reason for K3 based devices Wadim Egorov
  • [PATCH 2/2] arm: mach-k3: am62x: Implement get_reset_reason() Wadim Egorov
  • [PATCH 1/2] arm: mach-k3: Detect and print reset reason Wadim Egorov
  • Re: [PATCH 0/2] Print Reset Reason for K3 based devices Neha Malcom Francis
  • Re: [PATCH 0/2] Print Reset Reason for K3 based devices Tom Rini
• Re: [PATCH 1/3] arm: dts: k3-*-r5: Remove clocks from mcu_timer0 Francesco Dolcini
  • Re: [PATCH 1/3] arm: dts: k3-*-r5: Remove clocks from mcu_timer0 Manorit Chawdhry
• [PATCH] arm: imx: imx8m: soc: fix the macro name Dario Binacchi
  • Re: [PATCH] arm: imx: imx8m: soc: fix the macro name Quentin Schulz
  • Re: [PATCH] arm: imx: imx8m: soc: fix the macro name Tom Rini
• RE: [PATCH v1 1/5] arm: socfpga: agilex5: Add MMU mapping region Chee, Tien Fong
• RE: [PATCH 5/5] drivers: ddr: altera: Add ECC scrubbing with Dcache enabled Chee, Tien Fong
• RE: [PATCH 4/5] drivers: ddr: altera: arria10: Move common code to common file Chee, Tien Fong
• RE: [PATCH 3/5] drivers: ddr: altera: arria10: Fix incorrect address for mpu1 Chee, Tien Fong
• RE: [PATCH 2/5] drivers: ddr: altera: arria10: Add valid RAM size check Chee, Tien Fong
• RE: [PATCH 1/5] drivers: ddr: altera: arria10: Add DRAM size checking Chee, Tien Fong
• RE: [PATCH] arm: socfpga: n5x: Remove invalid configuration for N5X Chee, Tien Fong
• [PATCH 0/5] Start removing <env.h> from headers when not required Tom Rini
  • [PATCH 1/5] global: Add <linux/string.h> instead of long indirect include path Tom Rini
  • [PATCH 2/5] cmd/mem.c, test/cmd/mem_copy.c: Add <compiler.h> Tom Rini
  • [PATCH 3/5] gpio: pca953x: Add missing <asm/byteorder.h> Tom Rini
  • [PATCH 5/5] include/command.h: Drop <env.h> Tom Rini
  • [PATCH 4/5] global: Avoid indirect inclusion of <env.h> from <command.h> Tom Rini
  • Re: [PATCH 4/5] global: Avoid indirect inclusion of <env.h> from <command.h> Mattijs Korpershoek
  • Re: [PATCH 4/5] global: Avoid indirect inclusion of <env.h> from <command.h> Jerome Forissier
  • [PATCH v3 00/22] Remove <env.h> from <net.h> Tom Rini
  • [PATCH v3 02/22] congatec: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 03/22] dhelectronics: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 04/22] imx8ulp_evk: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 01/22] net: Remove env_get_ip helper() function Tom Rini
  • [PATCH v3 05/22] net: Include string.h in net-legacy.h Tom Rini
  • [PATCH v3 06/22] venice: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 07/22] phytec: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 08/22] ronetix: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 10/22] advantech: Include env.h in imx8qm_dmsse20_a1 Tom Rini
  • [PATCH v3 11/22] tegra: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 09/22] toradex: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 12/22] synology: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 14/22] freescale: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 15/22] google: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 16/22] liebherr: Include env.h to permit reading the environment Tom Rini
  • Re: [PATCH v3 16/22] liebherr: Include env.h to permit reading the environment Lukasz Majewski
  • [PATCH v3 17/22] technexion: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 19/22] net: Include env.h in pcap.c Tom Rini
  • [PATCH v3 20/22] net: dc2114x: Include env.h to permit reading the environment Tom Rini
  • [PATCH v3 18/22] net: Include byteorder in net6.h Tom Rini
  • [PATCH v3 22/22] include/net.h: Drop <env.h> Tom Rini
  • [PATCH v3 21/22] global: Avoid indirect inclusion of <env.h> from <net.h> Tom Rini
  • Re: [PATCH v3 21/22] global: Avoid indirect inclusion of <env.h> from <net.h> Jerome Forissier
  • Re: [PATCH v3 21/22] global: Avoid indirect inclusion of <env.h> from <net.h> Martyn Welch
  • Re: [PATCH v3 21/22] global: Avoid indirect inclusion of <env.h> from <net.h> Wolfgang Wallner
  • Re: [PATCH v3 21/22] global: Avoid indirect inclusion of <env.h> from <net.h> Ilias Apalodimas
  • [PATCH v3 13/22] amlogic: Include env.h to permit reading the environment Tom Rini
  • Re: [PATCH v3 00/22] Remove <env.h> from <net.h> Tom Rini
  • Re: [PATCH 0/5] Start removing <env.h> from headers when not required Tom Rini
• [PATCH 0/4] rockchip: enable exFAT support for Theobroma products Quentin Schulz
  • [PATCH 1/4] configs: ringneck-px30: enable exFAT support Quentin Schulz
  • Re: [PATCH 1/4] configs: ringneck-px30: enable exFAT support Kever Yang
  • [PATCH 4/4] configs: puma-rk3399: enable exFAT support Quentin Schulz
  • Re: [PATCH 4/4] configs: puma-rk3399: enable exFAT support Kever Yang
  • [PATCH 3/4] configs: tiger-rk3588: enable exFAT support Quentin Schulz
  • Re: [PATCH 3/4] configs: tiger-rk3588: enable exFAT support Kever Yang
  • [PATCH 2/4] configs: jaguar-rk3588: enable exFAT support Quentin Schulz
  • Re: [PATCH 2/4] configs: jaguar-rk3588: enable exFAT support Kever Yang
• [PATCH v3 0/2] test/py: enable HTTP testing Adriano Cordova
  • [PATCH v3 1/2] CI testing: add http server to CI tests Adriano Cordova
  • Re: [PATCH v3 1/2] CI testing: add http server to CI tests Tom Rini
  • Re: [PATCH v3 1/2] CI testing: add http server to CI tests Ilias Apalodimas
  • Re: [PATCH v3 1/2] CI testing: add http server to CI tests Adriano Cordova Fedeli
  • [PATCH v3 2/2] cmd/Kconfig: select CMD_WGET if ARCH_QEMU Adriano Cordova
  • Re: [PATCH v3 2/2] cmd/Kconfig: select CMD_WGET if ARCH_QEMU Tom Rini
  • Re: [PATCH v3 2/2] cmd/Kconfig: select CMD_WGET if ARCH_QEMU Ilias Apalodimas
• [PATCH] rpi: copy /system/linux,{serial,revision} from firmware FDT Fiona Klute
• [PATCH v2 0/3] test/py: enable HTTP testing Adriano Cordova
  • [PATCH v2 2/3] cmd/Kconfig: select CMD_WGET if ARCH_QEMU Adriano Cordova
  • [PATCH v2 3/3] py/tests/test_efi_loader.py: execute HTTP testing Adriano Cordova
  • Re: [PATCH v2 3/3] py/tests/test_efi_loader.py: execute HTTP testing Tom Rini
  • Re: [PATCH v2 3/3] py/tests/test_efi_loader.py: execute HTTP testing Adriano Córdova
  • Re: [PATCH v2 3/3] py/tests/test_efi_loader.py: execute HTTP testing Tom Rini
  • [PATCH v2 1/3] CI testing: add http server to CI tests Adriano Cordova
• [PATCH v2 0/6] Introduce support for QCS8300 SoC based IQ8 Series Platform Balaji Selvanathan
  • [PATCH v2 1/6] doc: board: qualcomm: document Dragonwing board building/flashing Balaji Selvanathan
  • [PATCH v2 2/6] dts: qcs8300-ride-u-boot.dtsi: Add memory entry to bootup Balaji Selvanathan
  • [PATCH v2 3/6] clk/qcom: qcs8300: Add GCC clock driver for QCS8300 Balaji Selvanathan
  • Re: [PATCH v2 3/6] clk/qcom: qcs8300: Add GCC clock driver for QCS8300 neil . armstrong
  • [PATCH v2 4/6] phy: qcom: Enable QMP UFS PHY driver for QCS8300 Balaji Selvanathan
  • Re: [PATCH v2 4/6] phy: qcom: Enable QMP UFS PHY driver for QCS8300 neil . armstrong
  • [PATCH v2 6/6] configs: add qcs8300_defconfig Balaji Selvanathan
  • [PATCH v2 5/6] qcom_defconfig: Enable QCS8300 clock driver Balaji Selvanathan
• Re: [PATCH 1/4] cmd/cat.c: Add missing include Tom Rini
• [PATCH 3/4] board: bsh: imx6ulz_smm_m2: Add support for 512 MiB DRAM Dario Binacchi
  • Re: [PATCH 3/4] board: bsh: imx6ulz_smm_m2: Add support for 512 MiB DRAM Fabio Estevam
• [PATCH 4/4] board: bsh: imx6ulz_smm_m2: Add delay between DRAM read access Dario Binacchi
• Re: [PATCH 1/1] tools: mkimage: validate image references in FIT configurations Quentin Schulz
  • Re: [PATCH 1/1] tools: mkimage: validate image references in FIT configurations Simon Glass
  • Re: [PATCH 1/1] tools: mkimage: validate image references in FIT configurations Quentin Schulz
  • Re: [PATCH 1/1] tools: mkimage: validate image references in FIT configurations Alexander Dahl
  • Re: [PATCH 1/1] tools: mkimage: validate image references in FIT configurations Aristo Chen
• [PATCH v5 00/12] Add Synopsys MIPI I3C Driver support dinesh . maniyam
  • [PATCH v5 01/12] drivers: i3c: Add new i3c uclass id dinesh . maniyam
  • [PATCH v5 03/12] drivers: i3c: Add i3c uclass driver. dinesh . maniyam
  • [PATCH v5 05/12] drivers: i3c: Enabled Kconfig and Makefile for DWI3C dinesh . maniyam
  • [PATCH v5 07/12] drivers: i3c: master: Enable probe i3c without slave device dinesh . maniyam
  • [PATCH v5 08/12] i3c: master: dw-i3c-master: Fix OD_TIMING for spike filter dinesh . maniyam
  • [PATCH v5 09/12] cmd: Add i3c command support. dinesh . maniyam
  • [PATCH v5 10/12] test: cmd: Add simple test for i3c dinesh . maniyam
  • [PATCH v5 12/12] configs: agilex5_defconfig: Enable i3c configs for agilex5 dinesh . maniyam
  • [PATCH v5 04/12] drivers: Enabled Kconfig and Makefile for i3c support dinesh . maniyam
  • [PATCH v5 11/12] configs: sandbox_defconfig: Enable configs for sandbox i3c dinesh . maniyam
  • [PATCH v5 06/12] drivers: i3c: Add i3c sandbox simple test. dinesh . maniyam
  • RE: [PATCH v5 00/12] Add Synopsys MIPI I3C Driver support Maniyam, Dinesh
• Re: [PATCH] imx8m: soc: cope with existing optee node Rasmus Villemoes
• [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels 牛 志宏
  • Re: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels Simon Glass
  • Re: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels Heinrich Schuchardt
  • Re: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels Tom Rini
  • Re: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels Heinrich Schuchardt
  • 回复: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels 牛 志宏
  • Re: 回复: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels Tom Rini
  • 回复: 回复: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels 牛 志宏
  • Re: 回复: 回复: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels Yao Zi
  • Re: 回复: 回复: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels Tom Rini
  • 回复: 回复: 回复: [PATCH] bootm: Pass SMP core ID and DTB address for ELF-formatted kernels 牛 志宏
• Re: [PATCH] net: lwip: tftp: time out if there is no reply from server Jerome Forissier
• [PATCH v1 0/5] Introduce support for QCS615 SoC based Platform Aswin Murugan
  • [PATCH v1 2/5] phy: qcom: Enable QMP UFS PHY driver for QCS615 Aswin Murugan
  • Re: [PATCH v1 2/5] phy: qcom: Enable QMP UFS PHY driver for QCS615 neil . armstrong
  • [PATCH v1 3/5] clk/qcom: qcs615: Add GCC clock driver for QCS615 Aswin Murugan
  • Re: [PATCH v1 3/5] clk/qcom: qcs615: Add GCC clock driver for QCS615 neil . armstrong
  • [PATCH v1 5/5] configs: add qcs615_defconfig Aswin Murugan
  • [PATCH v1 4/5] qcom_defconfig: Enable QCS615 clock driver Aswin Murugan
  • [PATCH v1 1/5] dts: qcs615-ride-u-boot.dtsi: Add memory entry to bootup Aswin Murugan
• [PATCH v4 0/5] Enable env in SCSI Varadarajan Narayanan
  • [PATCH v4 1/5] disk: part: implement generic function part_get_info_by_uuid() Varadarajan Narayanan
  • Re: [PATCH v4 1/5] disk: part: implement generic function part_get_info_by_uuid() Heinrich Schuchardt
  • [PATCH v4 2/5] scsi: Implement get_blk() function Varadarajan Narayanan
  • [PATCH v4 3/5] env: Add support for storing env variables in SCSI devices Varadarajan Narayanan
  • [PATCH v4 4/5] doc: board/qualcomm: document iq9 building and flashing Varadarajan Narayanan
  • Re: [PATCH v4 4/5] doc: board/qualcomm: document iq9 building and flashing Casey Connolly
  • Re: [PATCH v4 4/5] doc: board/qualcomm: document iq9 building and flashing Balaji Selvanathan
  • [PATCH v4 5/5] configs: qcs9100: Enable env in SCSI Varadarajan Narayanan

• Earlier messages
• Later messages