Add targets of am335x_evm_uart{1,2,4,5} to have serial input/output on
UART{1,2,4,5} for use with the Beaglebone RS232 cape and other custom
configurations.
Signed-off-by: Andrew Bradford <and...@bradfordembedded.com>
---
boards.cfg | 4 ++++
include/configs/am335x_evm.h | 28 +++++++++++++++++++++++++++-
2 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/boards.cfg b/boards.cfg
index f789539..342de03 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -220,6 +220,10 @@ integratorap_cm946es arm arm946es
integrator armltd
integratorcp_cm946es arm arm946es integrator
armltd - integratorcp:CM946ES
ca9x4_ct_vxp arm armv7 vexpress armltd
am335x_evm arm armv7 am335x ti
am33xx
+am335x_evm_uart1 arm armv7 am335x ti
am33xx am335x_evm:AM33XX_UART_SELECT=1
+am335x_evm_uart2 arm armv7 am335x ti
am33xx am335x_evm:AM33XX_UART_SELECT=2
+am335x_evm_uart4 arm armv7 am335x ti
am33xx am335x_evm:AM33XX_UART_SELECT=4
+am335x_evm_uart5 arm armv7 am335x ti
am33xx am335x_evm:AM33XX_UART_SELECT=5
highbank arm armv7 highbank -
highbank
mx51_efikamx arm armv7 mx51_efikamx
genesi mx5
mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
mx51_efikasb arm armv7 mx51_efikamx
genesi mx5
mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index a3752bc..efb11d8 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -158,9 +158,14 @@
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has
UART0 */
+#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
+#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
+#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
+#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
/* I2C Configuration */
#define CONFIG_I2C
@@ -182,11 +187,32 @@
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
+#define CONFIG_ENV_OVERWRITE 1
+
/*
- * select serial console configuration
+ * select serial console configuration, uart0 always enabled
*/
#define CONFIG_SERIAL1 1
+#ifndef CONFIG_AM33XX_UART_SELECT
#define CONFIG_CONS_INDEX 1
+#endif /* CONFIG_AM33XX_UART_SELECT */
+
+#if CONFIG_AM33XX_UART_SELECT == 1
+#define CONFIG_SERIAL2 1
+#define CONFIG_CONS_INDEX 2
+#endif /* CONFIG_AM33XX_UART_SELECT == 1 */
+#if CONFIG_AM33XX_UART_SELECT == 2
+#define CONFIG_SERIAL3 1
+#define CONFIG_CONS_INDEX 3
+#endif /* CONFIG_AM33XX_UART_SELECT == 2 */
+#if CONFIG_AM33XX_UART_SELECT == 4
+#define CONFIG_SERIAL5 1
+#define CONFIG_CONS_INDEX 5
+#endif /* CONFIG_AM33XX_UART_SELECT == 4 */
+#if CONFIG_AM33XX_UART_SELECT == 5
+#define CONFIG_SERIAL6 1
+#define CONFIG_CONS_INDEX 6
+#endif /* CONFIG_AM33XX_UART_SELECT == 5 */
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_ENV_IS_NOWHERE
--
1.7.10
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
