Dear Thirumalesha N,
In message <cao1rv-addqc_0_p0yqptmnwovusfvunthtnmtqhsct2psh3...@mail.gmail.com>
you wrote:
>
> I modified MPC8260ADS with CPU clock frequency 100MHz, Text base
Is this the actual clock frequency on your system? Really?
> 0xfff00000, Flash Base 0xfff00000 and sdram base 0x00000000, and console on
Are these values correct for your hardware?
> SMC of port pins PA9(RX) and PA8 (Tx), But nothing am getting on serial
> port while booting. Please can any one suggest me to come out of this.
Check the BRGs and the clock routing; if you don't have the right
clocksand all tehse little details there will be no output.
Best is to attach your JTAG debugger and start GDB.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Programmer's Lament: (Shakespeare, Macbeth, Act I, Scene vii)
"That we but teach bloody instructions,
which, being taught, return to plague the inventor..."
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
