> Signed-off-by: Wolfgang Grandegger <w...@denx.de>
> CC: Jason Liu <r64...@freescale.com>
> ---
> board/freescale/mx53loco/mx53loco.c | 10 ++++++++++
> include/configs/mx53loco.h | 13 +++++++++++++
> 2 files changed, 23 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx53loco/mx53loco.c
> b/board/freescale/mx53loco/mx53loco.c index b4c7f33..7bccfa9 100644
> --- a/board/freescale/mx53loco/mx53loco.c
> +++ b/board/freescale/mx53loco/mx53loco.c
> @@ -78,6 +78,16 @@ static void setup_iomux_uart(void)
> PAD_CTL_ODE_OPENDRAIN_ENABLE);
> }
>
> +#ifdef CONFIG_USB_EHCI_MX5
> +void board_ehci_hcd_init(int port)
> +{
> + /* request VBUS power enable pin, GPIO[8}, gpio7 */
> + mxc_request_iomux(MX53_PIN_ATA_DA_2, IOMUX_CONFIG_ALT1);
> + gpio_direction_output(IMX_GPIO_NR(7, 8), 0);
> + gpio_set_value(IMX_GPIO_NR(7, 8), 1);
We don't have this GPIO defined by standard means?
> +}
> +#endif
> +
> static void setup_iomux_fec(void)
> {
> /*FEC_MDIO*/
> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
> index d699010..9ce43d7 100644
> --- a/include/configs/mx53loco.h
> +++ b/include/configs/mx53loco.h
> @@ -72,6 +72,19 @@
> #define CONFIG_CMD_MII
> #define CONFIG_CMD_NET
>
> +/* USB Configs */
> +#define CONFIG_CMD_USB
> +#define CONFIG_CMD_FAT
> +#define CONFIG_USB_EHCI
> +#define CONFIG_USB_EHCI_MX5
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_USB_HOST_ETHER
> +#define CONFIG_USB_ETHER_ASIX
> +#define CONFIG_USB_ETHER_SMSC95XX
> +#define CONFIG_MXC_USB_PORT 1
> +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
> +#define CONFIG_MXC_USB_FLAGS 0
> +
> /* allow to overwrite serial and ethaddr */
> #define CONFIG_ENV_OVERWRITE
> #define CONFIG_CONS_INDEX 1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
