On 11/14/2011 11:46 AM, Marek Vasut wrote: >> On 11/11/2011 10:44 PM, Marek Vasut wrote: >>>> This patches series provides USB host support for the mx51evk and >>>> mx53loco. The generic ehci-mx5 interface is derived from ehci-mxc >>>> and uses the header files of the ehci-fsl interface. The callback >>>> board_ehci_hcd_init() allows to do board-specific setup when USB is >>>> started. >>>> >>>> Wolfgang. >>>> >>>> Wolfgang Grandegger (5): >>>> mx5: add helper functions to enable USB clocks >>>> mx5: add helper function to retrieve the GPIO number >>>> mx5: add generic USB EHCI support for mx51 and mx53 >>>> mx53loco: add end enable USB host support on port 1 >>>> mx51evk: add end enable USB host support on port 1 >>>> >>>> arch/arm/cpu/armv7/mx5/clock.c | 72 ++++++++++++ >>>> arch/arm/include/asm/arch-mx5/clock.h | 5 + >>>> arch/arm/include/asm/arch-mx5/crm_regs.h | 3 + >>>> arch/arm/include/asm/arch-mx5/mx5x_pins.h | 4 + >>>> board/freescale/mx51evk/mx51evk.c | 92 +++++++++++++++ >>>> board/freescale/mx53loco/mx53loco.c | 10 ++ >>>> drivers/usb/host/Makefile | 1 + >>>> drivers/usb/host/ehci-mx5.c | 174 >>>> >>>> +++++++++++++++++++++++++++++ include/configs/mx51evk.h >>>> | >>>> >>>> 13 ++ >>>> include/configs/mx53loco.h | 13 ++ >>>> include/usb/ehci-fsl.h | 10 ++ >>>> 11 files changed, 397 insertions(+), 0 deletions(-) >>>> create mode 100644 drivers/usb/host/ehci-mx5.c >>> >>> Hi, >>> >>> isn't Jana already doing this kind of USB support for mx5 based on my old >>> patches? You didn't notice? >> >> Well, I already responded on Jana's patches and presented my ideas here: >> >> http://marc.info/?l=u-boot&m=132067806107887&w=2 >> >> Unfortunately, only the mails with subject "[PATCH] ..." get enough >> attention ;-). > > Well aparently she isn't even signed to the ML ... so you need to CC her ... > doh > :-/
What do you mean? I replied to *all*! >> The big difference to Jana's patch is that he uses a board-specific >> implementation (ehci_hcd_init() is in board specific code). I think we >> should share some code. > > Please do. See my patches ;-). Well, maybe it's more straight forward if we try to get my patches for the MX51/53 boards accepted first and then Jana could then use the negotiated interface. But also vise versa is fine for me. Wolfgang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
