On 11/11/2011 10:44 PM, Marek Vasut wrote: >> This patches series provides USB host support for the mx51evk and >> mx53loco. The generic ehci-mx5 interface is derived from ehci-mxc >> and uses the header files of the ehci-fsl interface. The callback >> board_ehci_hcd_init() allows to do board-specific setup when USB is >> started. >> >> Wolfgang. >> >> Wolfgang Grandegger (5): >> mx5: add helper functions to enable USB clocks >> mx5: add helper function to retrieve the GPIO number >> mx5: add generic USB EHCI support for mx51 and mx53 >> mx53loco: add end enable USB host support on port 1 >> mx51evk: add end enable USB host support on port 1 >> >> arch/arm/cpu/armv7/mx5/clock.c | 72 ++++++++++++ >> arch/arm/include/asm/arch-mx5/clock.h | 5 + >> arch/arm/include/asm/arch-mx5/crm_regs.h | 3 + >> arch/arm/include/asm/arch-mx5/mx5x_pins.h | 4 + >> board/freescale/mx51evk/mx51evk.c | 92 +++++++++++++++ >> board/freescale/mx53loco/mx53loco.c | 10 ++ >> drivers/usb/host/Makefile | 1 + >> drivers/usb/host/ehci-mx5.c | 174 >> +++++++++++++++++++++++++++++ include/configs/mx51evk.h | >> 13 ++ >> include/configs/mx53loco.h | 13 ++ >> include/usb/ehci-fsl.h | 10 ++ >> 11 files changed, 397 insertions(+), 0 deletions(-) >> create mode 100644 drivers/usb/host/ehci-mx5.c > > Hi, > > isn't Jana already doing this kind of USB support for mx5 based on my old > patches? You didn't notice?
Well, I already responded on Jana's patches and presented my ideas here: http://marc.info/?l=u-boot&m=132067806107887&w=2 Unfortunately, only the mails with subject "[PATCH] ..." get enough attention ;-). The big difference to Jana's patch is that he uses a board-specific implementation (ehci_hcd_init() is in board specific code). I think we should share some code. Wolfgang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
