On 11/11/2011 03:22 PM, Fabio Estevam wrote: > Hi Wolfgang, > > On Fri, Nov 11, 2011 at 11:03 AM, Wolfgang Grandegger <w...@denx.de> wrote: >> It's derived from ehci-mxc and uses the header files of the >> ehci-fsl interface. The callback board_ehci_hcd_init() has >> been introduced to allow for board-specific setup when USB >> is started. >> >> Signed-off-by: Wolfgang Grandegger <w...@denx.de> >> CC: Stefano Babic <sba...@denx.de> >> CC: Remy Bohmer <li...@bohmer.net> >> --- >> drivers/usb/host/Makefile | 1 + >> drivers/usb/host/ehci-mx5.c | 174 >> +++++++++++++++++++++++++++++++++++++++++++ >> include/usb/ehci-fsl.h | 10 +++ >> 3 files changed, 185 insertions(+), 0 deletions(-) >> create mode 100644 drivers/usb/host/ehci-mx5.c > > Do we really need to create a drivers/usb/host/ehci-mx5.c? > > Can't mx5 USB support be included inside drivers/usb/host/ehci-mxc.c instead?
it could be included into ehci-mxc.c using #ifdef's, of course. Would that be the better solution? Wolfgang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
