This patches series provides USB host support for the mx51evk and mx53loco. The generic ehci-mx5 interface is derived from ehci-mxc and uses the header files of the ehci-fsl interface. The callback board_ehci_hcd_init() allows to do board-specific setup when USB is started.
Wolfgang. Wolfgang Grandegger (5): mx5: add helper functions to enable USB clocks mx5: add helper function to retrieve the GPIO number mx5: add generic USB EHCI support for mx51 and mx53 mx53loco: add end enable USB host support on port 1 mx51evk: add end enable USB host support on port 1 arch/arm/cpu/armv7/mx5/clock.c | 72 ++++++++++++ arch/arm/include/asm/arch-mx5/clock.h | 5 + arch/arm/include/asm/arch-mx5/crm_regs.h | 3 + arch/arm/include/asm/arch-mx5/mx5x_pins.h | 4 + board/freescale/mx51evk/mx51evk.c | 92 +++++++++++++++ board/freescale/mx53loco/mx53loco.c | 10 ++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-mx5.c | 174 +++++++++++++++++++++++++++++ include/configs/mx51evk.h | 13 ++ include/configs/mx53loco.h | 13 ++ include/usb/ehci-fsl.h | 10 ++ 11 files changed, 397 insertions(+), 0 deletions(-) create mode 100644 drivers/usb/host/ehci-mx5.c -- 1.7.4.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
