> This patches series provides USB host support for the mx51evk and > mx53loco. The generic ehci-mx5 interface is derived from ehci-mxc > and uses the header files of the ehci-fsl interface. The callback > board_ehci_hcd_init() allows to do board-specific setup when USB is > started. > > Wolfgang. > > Wolfgang Grandegger (5): > mx5: add helper functions to enable USB clocks > mx5: add helper function to retrieve the GPIO number > mx5: add generic USB EHCI support for mx51 and mx53 > mx53loco: add end enable USB host support on port 1 > mx51evk: add end enable USB host support on port 1 > > arch/arm/cpu/armv7/mx5/clock.c | 72 ++++++++++++ > arch/arm/include/asm/arch-mx5/clock.h | 5 + > arch/arm/include/asm/arch-mx5/crm_regs.h | 3 + > arch/arm/include/asm/arch-mx5/mx5x_pins.h | 4 + > board/freescale/mx51evk/mx51evk.c | 92 +++++++++++++++ > board/freescale/mx53loco/mx53loco.c | 10 ++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-mx5.c | 174 > +++++++++++++++++++++++++++++ include/configs/mx51evk.h | > 13 ++ > include/configs/mx53loco.h | 13 ++ > include/usb/ehci-fsl.h | 10 ++ > 11 files changed, 397 insertions(+), 0 deletions(-) > create mode 100644 drivers/usb/host/ehci-mx5.c
Hi, I'm working on MX51 USB support based on some patches from Marek Vasut. It solves the problem in another way (uses structure-based offsets and generic ULPI implementation I've written for this) and is probably more polished because it's spent in the mailing list something like 2 months. However, your patch supports both mx51 and mx53, so I think it would be nice to find some way to get them together. Last but not least, I'm sorry that I didn't respond to your first e-mail, but I had to study for a test and hadn't time to look at your patch better. Regards, Jana Rapava _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
