> -----Original Message----- > From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] > On Behalf Of Ilya Yanok > Sent: Friday, June 25, 2010 1:07 AM > To: Phillips Kim-R1AAHA > Cc: u-boot@lists.denx.de > Subject: Re: [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for > devboard from Freescale > > Hi Kim, > > On 24.06.2010 22:00, Kim Phillips wrote: > >> I've enabled icache and now the board sometimes resets twice after > >> U-Boot 'reset' command: > >> > > > >> (It doesn't always stop at "DRAM:" line but that position is most > >> frequent) Maybe you have some ideas on this subject? > >> > > hmm, if it's only on soft-resets, can you try adding > > HID0_ENABLE_INSTRUCTION_CACHE to CONFIG_SYS_HID0_INIT in addition to > > _FINAL? Some cache state is preserved over a soft-reset... > > > > Thanks for your advice but this doesn't help... > Just from my experience on few other boards, this could be a DDR configuration issue. Can you try to run at lower frequencies?..Or may be playing with DDR controller timings.
Regards Poonam > Regards, Ilya. > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
