On Wed, 7 Jul 2010 20:16:13 +0400 Ilya Yanok <ya...@emcraft.com> wrote:
> This patch provides support for MPC8308RDB development board from > Freescale with a minimal set of features: > Dual UART is supported > NOR flash is supported > Both TSEC Ethernet controllers are supported > PCI Express initialization is supported > > The following features are enabled in configuration but not fully tested: > I2C (used to get the board revision) > I2C-connected RTC > VSC7385 switch > > There is one (hopefully) minor issue: on soft reset the board sometimes > resets twice. I've not managed to find the fix for this problem yet. > As a workaround instruction cache can be disabled. > > Signed-off-by: Ilya Yanok <ya...@emcraft.com> > --- Applied, after relocating the boards.cfg entry to maintain the correct sort order. Thanks, Kim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
