On Thu, 24 Jun 2010 19:59:13 +0400 Ilya Yanok <ya...@emcraft.com> wrote:
> On 23.06.2010 04:17, Kim Phillips wrote: > >> +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ > >> + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) > >> > > | HID0_ENABLE_INSTRUCTION_CACHE? > > I've enabled icache and now the board sometimes resets twice after > U-Boot 'reset' command: > (It doesn't always stop at "DRAM:" line but that position is most frequent) > Maybe you have some ideas on this subject? hmm, if it's only on soft-resets, can you try adding HID0_ENABLE_INSTRUCTION_CACHE to CONFIG_SYS_HID0_INIT in addition to _FINAL? Some cache state is preserved over a soft-reset... Thanks, Kim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
