On 26.03.2019 16:01, Stefan Roese wrote:
> > On 26.03.19 14:58, eugen.hris...@microchip.com wrote: >> >> >> On 26.03.2019 14:16, Stefan Roese wrote: >> >>> The GARDENA smart Gateway boards are equipped with an Atmel / Microchip >>> AT91SAM9G25 SoC and with 128 MiB of RAM and 256 MiB of NAND storage. >>> This patch adds support for this board including SPL support. Therefore >>> the AT91Boostrap is not needed on this platform any more. >>> >>> Signed-off-by: Stefan Roese <s...@denx.de> >>> Cc: Heiko Schocher <h...@denx.de> >>> Cc: Andreas Bießmann <andr...@biessmann.org> >>> Cc: Eugen Hristev <eugen.hris...@microchip.com> >>> --- >>> v2: >>> - Add dtb build target in dts Makefile >>> - Add gardena-smart-gateway-at91sam-u-boot.dtsi file with U-Boot >>> specific DT properties >>> - at91sam9x5ek.dtsi is not included in the dts file any more as this >>> did enable too much unused devices >>> >>> arch/arm/dts/Makefile | 3 + >>> .../gardena-smart-gateway-at91sam-u-boot.dtsi | 5 + >>> .../arm/dts/gardena-smart-gateway-at91sam.dts | 119 +++++++++++++++ >>> arch/arm/mach-at91/Kconfig | 8 ++ >>> board/gardena/smart-gateway-at91sam/Kconfig | 12 ++ >>> .../gardena/smart-gateway-at91sam/MAINTAINERS | 7 + >>> board/gardena/smart-gateway-at91sam/Makefile | 7 + >>> board/gardena/smart-gateway-at91sam/board.c | 59 ++++++++ >>> board/gardena/smart-gateway-at91sam/spl.c | 135 >>> ++++++++++++++++++ >>> .../gardena-smart-gateway-at91sam_defconfig | 84 +++++++++++ >>> .../configs/gardena-smart-gateway-at91sam.h | 88 ++++++++++++ >>> 11 files changed, 527 insertions(+) >>> create mode 100644 >>> arch/arm/dts/gardena-smart-gateway-at91sam-u-boot.dtsi >>> create mode 100644 arch/arm/dts/gardena-smart-gateway-at91sam.dts >>> create mode 100644 board/gardena/smart-gateway-at91sam/Kconfig >>> create mode 100644 board/gardena/smart-gateway-at91sam/MAINTAINERS >>> create mode 100644 board/gardena/smart-gateway-at91sam/Makefile >>> create mode 100644 board/gardena/smart-gateway-at91sam/board.c >>> create mode 100644 board/gardena/smart-gateway-at91sam/spl.c >>> create mode 100644 configs/gardena-smart-gateway-at91sam_defconfig >>> create mode 100644 include/configs/gardena-smart-gateway-at91sam.h >>> >>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile >>> index 0e2ffdb87f..e890492456 100644 >>> --- a/arch/arm/dts/Makefile >>> +++ b/arch/arm/dts/Makefile >>> @@ -607,6 +607,9 @@ dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \ >>> dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb >>> +dtb-$(CONFIG_TARGET_GARDENA_SMART_GATWAY_AT91SAM) += \ >> >> Hi Stefan, >> >> Is the "GATWAY" intentional? would be difficult to find if someone >> searches for it... > > Ups. Definitely not! Thanks for catching. I'll fix it in the next > version. > > I also thought about adding "at91sam9g25-" to the beginning of the > dts file to better include it in the dts directory to the SoC > family. What is your thinking about this? > I do not have a strong opinion. As you like. > Thanks, > Stefan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
