This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/Kconfig | 1 -
board/freescale/ls1021atwr/Kconfig | 17 -
board/freescale/ls1021atwr/MAINTAINERS | 15 -
board/freescale/ls1021atwr/Makefile | 9 -
board/freescale/ls1021atwr/README | 115 ---
board/freescale/ls1021atwr/dcu.c | 46 --
board/freescale/ls1021atwr/ls1021atwr.c | 764 ------------------
board/freescale/ls1021atwr/ls102xa_pbi.cfg | 12 -
.../ls1021atwr/ls102xa_rcw_sd_ifc.cfg | 8 -
.../ls1021atwr/ls102xa_rcw_sd_qspi.cfg | 8 -
board/freescale/ls1021atwr/psci.S | 24 -
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 56 --
configs/ls1021atwr_nor_defconfig | 59 --
configs/ls1021atwr_nor_lpuart_defconfig | 57 --
configs/ls1021atwr_qspi_defconfig | 60 --
...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 70 --
configs/ls1021atwr_sdcard_ifc_defconfig | 67 --
configs/ls1021atwr_sdcard_qspi_defconfig | 70 --
include/configs/ls1021atwr.h | 505 ------------
19 files changed, 1963 deletions(-)
delete mode 100644 board/freescale/ls1021atwr/Kconfig
delete mode 100644 board/freescale/ls1021atwr/MAINTAINERS
delete mode 100644 board/freescale/ls1021atwr/Makefile
delete mode 100644 board/freescale/ls1021atwr/README
delete mode 100644 board/freescale/ls1021atwr/dcu.c
delete mode 100644 board/freescale/ls1021atwr/ls1021atwr.c
delete mode 100644 board/freescale/ls1021atwr/ls102xa_pbi.cfg
delete mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
delete mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
delete mode 100644 board/freescale/ls1021atwr/psci.S
delete mode 100644 configs/ls1021atwr_nor_SECURE_BOOT_defconfig
delete mode 100644 configs/ls1021atwr_nor_defconfig
delete mode 100644 configs/ls1021atwr_nor_lpuart_defconfig
delete mode 100644 configs/ls1021atwr_qspi_defconfig
delete mode 100644 configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
delete mode 100644 configs/ls1021atwr_sdcard_ifc_defconfig
delete mode 100644 configs/ls1021atwr_sdcard_qspi_defconfig
delete mode 100644 include/configs/ls1021atwr.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6cadd96378b..97faf09e916 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1508,7 +1508,6 @@ source "board/freescale/ls2080ardb/Kconfig"
source "board/freescale/ls1088a/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1043aqds/Kconfig"
-source "board/freescale/ls1021atwr/Kconfig"
source "board/freescale/ls1021aiot/Kconfig"
source "board/freescale/ls1046aqds/Kconfig"
source "board/freescale/ls1012aqds/Kconfig"
diff --git a/board/freescale/ls1021atwr/Kconfig
b/board/freescale/ls1021atwr/Kconfig
deleted file mode 100644
index a4641cbca09..00000000000
--- a/board/freescale/ls1021atwr/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-if TARGET_LS1021ATWR
-
-config SYS_BOARD
- default "ls1021atwr"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_SOC
- default "ls102xa"
-
-config SYS_CONFIG_NAME
- default "ls1021atwr"
-
-source "board/freescale/common/Kconfig"
-
-endif
diff --git a/board/freescale/ls1021atwr/MAINTAINERS
b/board/freescale/ls1021atwr/MAINTAINERS
deleted file mode 100644
index c8b93c64697..00000000000
--- a/board/freescale/ls1021atwr/MAINTAINERS
+++ /dev/null
@@ -1,15 +0,0 @@
-LS1021ATWR BOARD
-M: Alison Wang <alison.w...@nxp.com>
-S: Maintained
-F: board/freescale/ls1021atwr/
-F: include/configs/ls1021atwr.h
-F: configs/ls1021atwr_nor_defconfig
-F: configs/ls1021atwr_nor_SECURE_BOOT_defconfig
-F: configs/ls1021atwr_nor_lpuart_defconfig
-F: configs/ls1021atwr_sdcard_ifc_defconfig
-F: configs/ls1021atwr_sdcard_qspi_defconfig
-F: configs/ls1021atwr_qspi_defconfig
-
-M: Sumit Garg <sumit.g...@nxp.com>
-S: Maintained
-F: configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1021atwr/Makefile
b/board/freescale/ls1021atwr/Makefile
deleted file mode 100644
index d9a2f52f2b6..00000000000
--- a/board/freescale/ls1021atwr/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Copyright 2014 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += ls1021atwr.o
-obj-$(CONFIG_VIDEO_FSL_DCU_FB) += dcu.o
-obj-$(CONFIG_ARMV7_PSCI) += psci.o
diff --git a/board/freescale/ls1021atwr/README
b/board/freescale/ls1021atwr/README
deleted file mode 100644
index 896a6594768..00000000000
--- a/board/freescale/ls1021atwr/README
+++ /dev/null
@@ -1,115 +0,0 @@
-Overview
---------
-The LS1021ATWR is a Freescale reference board that hosts the LS1021A SoC.
-
-LS1021A SoC Overview
-------------------
-The QorIQ LS1 family, which includes the LS1021A communications processor,
-is built on Layerscape architecture, the industry's first software-aware,
-core-agnostic networking architecture to offer unprecedented efficiency
-and scale.
-
-A member of the value-performance tier, the QorIQ LS1021A processor provides
-extensive integration and power efficiency for fanless, small form factor
-enterprise networking applications. Incorporating dual ARM Cortex-A7 cores
-running up to 1.0 GHz, the LS1021A processor delivers pre-silicon CoreMark
-performance of over 6,000, as well as virtualization support, advanced
-security features and the broadest array of high-speed interconnects and
-optimized peripheral features ever offered in a sub-3 W processor.
-
-The QorIQ LS1021A processor features an integrated LCD controller,
-CAN controller for implementing industrial protocols, DDR3L/4 running
-up to 1600 MHz, integrated security engine and QUICC Engine, and ECC
-protection on both L1 and L2 caches. The LS1021A processor is pin- and
-software-compatible with the QorIQ LS1020A and LS1022A processors.
-
-The LS1021A SoC includes the following function and features:
-
- - ARM Cortex-A7 MPCore compliant with ARMv7-A architecture
- - Dual high-preformance ARM Cortex-A7 cores, each core includes:
- - 32 Kbyte L1 Instruction Cache and Data Cache for each core (ECC
protection)
- - 512 Kbyte shared coherent L2 Cache (with ECC protection)
- - NEON Co-processor (per core)
- - 40-bit physical addressing
- - Vector floating-point support
- - ARM Core-Link CCI-400 Cache Coherent Interconnect
- - One DDR3L/DDR4 SDRAM memory controller with x8/x16/x32-bit configuration
- supporting speeds up to 1600Mtps
- - ECC and interleaving support
- - VeTSEC Ethernet complex
- - Up to 3x virtualized 10/100/1000 Ethernet controllers
- - MII, RMII, RGMII, and SGMII support
- - QoS, lossless flow control, and IEEE 1588 support
- - 4-lane 6GHz SerDes
- - High speed interconnect (4 SerDes lanes with are muxed for these protocol)
- - Two PCI Express Gen2 controllers running at up to 5 GHz
- - One Serial ATA 3.0 supporting 6 GT/s operation
- - Two SGMII interfaces supporting 1000 Mbps
- - Additional peripheral interfaces
- - One high-speed USB 3.0 controller with integrated PHY and one high-speed
- USB 2.00 controller with ULPI
- - Integrated flash controller (IFC) with 16-bit interface
- - Quad SPI NOR Flash
- - One enhanced Secure digital host controller
- - Display controller unit (DCU) 24-bit RGB (12-bit DDR pin interface)
- - Ten UARTs comprised of two 16550 compliant DUARTs, and six low power
- UARTs
- - Three I2C controllers
- - Eight FlexTimers four supporting PWM and four FlexCAN ports
- - Four GPIO controllers supporting up to 109 general purpose I/O signals
- - Integrated advanced audio block:
- - Four synchronous audio interfaces (SAI)
- - Sony/Philips Digital Interconnect Format (SPDIF)
- - Asynchronous Sample Rate Converter (ASRC)
- - Hardware based crypto offload engine
- - IPSec forwarding at up to 1Gbps
- - QorIQ Trust Architecture, Secure Boot, and ARM TrustZone supported
- - Public key hardware accelerator
- - True Random Number Generator (NIST Certified)
- - Advanced Encryption Standard Accelerators (AESA)
- - Data Encryption Standard Accelerators
- - QUICC Engine ULite block
- - Two universal communication controllers (TDM and HDLC) supporting 64
- multichannels, each running at 64 Kbps
- - Support for 256 channels of HDLC
- - QorIQ TrustArchitecture with Secure Boot, as well as ARM TrustZone supported
-
-LS1021ATWR board Overview
--------------------------
- - DDR Controller
- - Supports rates of up to 1600 MHz data-rate
- - Supports one DDR3LP SDRAM.
- - IFC/Local Bus
- - NOR: 128MB 16-bit NOR Flash
- - Ethernet
- - Three on-board RGMII 10/100/1G ethernet ports.
- - CPLD
- - Clocks
- - System and DDR clock (SYSCLK, DDRCLK)
- - SERDES clocks
- - Power Supplies
- - SDHC
- - SDHC/SDXC connector
- - Other IO
- - One Serial port
- - Three I2C ports
-
-Memory map
------------
-The addresses in brackets are physical addresses.
-
-Start Address End Address Description Size
-0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB
-0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB
-0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB
-0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB
-0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB
-0x00_4000_0000 0x00_5FFF_FFFF QSPI 512MB
-0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB
-0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB
-
-LS1021a rev1.0 Soc specific Options/Settings
---------------------------------------------
-If the LS1021a Soc is rev1.0, you need modify the configure file.
-Add the following define in include/configs/ls1021atwr.h:
-#define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/board/freescale/ls1021atwr/dcu.c b/board/freescale/ls1021atwr/dcu.c
deleted file mode 100644
index e1191f134cb..00000000000
--- a/board/freescale/ls1021atwr/dcu.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * FSL DCU Framebuffer driver
- */
-
-#include <common.h>
-#include <fsl_dcu_fb.h>
-#include "div64.h"
-#include "../common/dcu_sii9022a.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-unsigned int dcu_set_pixel_clock(unsigned int pixclock)
-{
- unsigned long long div;
-
- div = (unsigned long long)(gd->bus_clk / 1000);
- div *= (unsigned long long)pixclock;
- do_div(div, 1000000000);
-
- return div;
-}
-
-int platform_dcu_init(unsigned int xres, unsigned int yres,
- const char *port,
- struct fb_videomode *dcu_fb_videomode)
-{
- const char *name;
- unsigned int pixel_format;
-
- if (strncmp(port, "twr_lcd", 4) == 0) {
- name = "TWR_LCD_RGB card";
- } else {
- name = "HDMI";
- dcu_set_dvi_encoder(dcu_fb_videomode);
- }
-
- printf("DCU: Switching to %s monitor @ %ux%u\n", name, xres, yres);
-
- pixel_format = 32;
- fsl_dcu_init(xres, yres, pixel_format);
-
- return 0;
-}
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c
b/board/freescale/ls1021atwr/ls1021atwr.c
deleted file mode 100644
index dcd6d933ea8..00000000000
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ /dev/null
@@ -1,764 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/arch/immap_ls102xa.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/fsl_serdes.h>
-#include <asm/arch/ls102xa_devdis.h>
-#include <asm/arch/ls102xa_soc.h>
-#include <hwconfig.h>
-#include <mmc.h>
-#include <fsl_csu.h>
-#include <fsl_esdhc.h>
-#include <fsl_ifc.h>
-#include <fsl_immap.h>
-#include <netdev.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <fsl_sec.h>
-#include <fsl_devdis.h>
-#include <spl.h>
-#include "../common/sleep.h"
-#ifdef CONFIG_U_QE
-#include <fsl_qe.h>
-#endif
-#include <fsl_validate.h>
-
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define VERSION_MASK 0x00FF
-#define BANK_MASK 0x0001
-#define CONFIG_RESET 0x1
-#define INIT_RESET 0x1
-
-#define CPLD_SET_MUX_SERDES 0x20
-#define CPLD_SET_BOOT_BANK 0x40
-
-#define BOOT_FROM_UPPER_BANK 0x0
-#define BOOT_FROM_LOWER_BANK 0x1
-
-#define LANEB_SATA (0x01)
-#define LANEB_SGMII1 (0x02)
-#define LANEC_SGMII1 (0x04)
-#define LANEC_PCIEX1 (0x08)
-#define LANED_PCIEX2 (0x10)
-#define LANED_SGMII2 (0x20)
-
-#define MASK_LANE_B 0x1
-#define MASK_LANE_C 0x2
-#define MASK_LANE_D 0x4
-#define MASK_SGMII 0x8
-
-#define KEEP_STATUS 0x0
-#define NEED_RESET 0x1
-
-#define SOFT_MUX_ON_I2C3_IFC 0x2
-#define SOFT_MUX_ON_CAN3_USB2 0x8
-#define SOFT_MUX_ON_QE_LCD 0x10
-
-#define PIN_I2C3_IFC_MUX_I2C3 0x0
-#define PIN_I2C3_IFC_MUX_IFC 0x1
-#define PIN_CAN3_USB2_MUX_USB2 0x0
-#define PIN_CAN3_USB2_MUX_CAN3 0x1
-#define PIN_QE_LCD_MUX_LCD 0x0
-#define PIN_QE_LCD_MUX_QE 0x1
-
-struct cpld_data {
- u8 cpld_ver; /* cpld revision */
- u8 cpld_ver_sub; /* cpld sub revision */
- u8 pcba_ver; /* pcb revision number */
- u8 system_rst; /* reset system by cpld */
- u8 soft_mux_on; /* CPLD override physical switches Enable */
- u8 cfg_rcw_src1; /* Reset config word 1 */
- u8 cfg_rcw_src2; /* Reset config word 2 */
- u8 vbank; /* Flash bank selection Control */
- u8 gpio; /* GPIO for TWR-ELEV */
- u8 i2c3_ifc_mux;
- u8 mux_spi2;
- u8 can3_usb2_mux; /* CAN3 and USB2 Selection */
- u8 qe_lcd_mux; /* QE and LCD Selection */
- u8 serdes_mux; /* Multiplexed pins for SerDes Lanes */
- u8 global_rst; /* reset with init CPLD reg to default */
- u8 rev1; /* Reserved */
- u8 rev2; /* Reserved */
-};
-
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
-static void cpld_show(void)
-{
- struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
- printf("CPLD: V%x.%x\nPCBA: V%x.0\nVBank: %d\n",
- in_8(&cpld_data->cpld_ver) & VERSION_MASK,
- in_8(&cpld_data->cpld_ver_sub) & VERSION_MASK,
- in_8(&cpld_data->pcba_ver) & VERSION_MASK,
- in_8(&cpld_data->vbank) & BANK_MASK);
-
-#ifdef CONFIG_DEBUG
- printf("soft_mux_on =%x\n",
- in_8(&cpld_data->soft_mux_on));
- printf("cfg_rcw_src1 =%x\n",
- in_8(&cpld_data->cfg_rcw_src1));
- printf("cfg_rcw_src2 =%x\n",
- in_8(&cpld_data->cfg_rcw_src2));
- printf("vbank =%x\n",
- in_8(&cpld_data->vbank));
- printf("gpio =%x\n",
- in_8(&cpld_data->gpio));
- printf("i2c3_ifc_mux =%x\n",
- in_8(&cpld_data->i2c3_ifc_mux));
- printf("mux_spi2 =%x\n",
- in_8(&cpld_data->mux_spi2));
- printf("can3_usb2_mux =%x\n",
- in_8(&cpld_data->can3_usb2_mux));
- printf("qe_lcd_mux =%x\n",
- in_8(&cpld_data->qe_lcd_mux));
- printf("serdes_mux =%x\n",
- in_8(&cpld_data->serdes_mux));
-#endif
-}
-#endif
-
-int checkboard(void)
-{
- puts("Board: LS1021ATWR\n");
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
- cpld_show();
-#endif
-
- return 0;
-}
-
-void ddrmc_init(void)
-{
- struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR;
- u32 temp_sdram_cfg, tmp;
-
- out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG);
-
- out_be32(&ddr->cs0_bnds, DDR_CS0_BNDS);
- out_be32(&ddr->cs0_config, DDR_CS0_CONFIG);
-
- out_be32(&ddr->timing_cfg_0, DDR_TIMING_CFG_0);
- out_be32(&ddr->timing_cfg_1, DDR_TIMING_CFG_1);
- out_be32(&ddr->timing_cfg_2, DDR_TIMING_CFG_2);
- out_be32(&ddr->timing_cfg_3, DDR_TIMING_CFG_3);
- out_be32(&ddr->timing_cfg_4, DDR_TIMING_CFG_4);
- out_be32(&ddr->timing_cfg_5, DDR_TIMING_CFG_5);
-
-#ifdef CONFIG_DEEP_SLEEP
- if (is_warm_boot()) {
- out_be32(&ddr->sdram_cfg_2,
- DDR_SDRAM_CFG_2 & ~SDRAM_CFG2_D_INIT);
- out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
- out_be32(&ddr->init_ext_addr, (1 << 31));
-
- /* DRAM VRef will not be trained */
- out_be32(&ddr->ddr_cdr2,
- DDR_DDR_CDR2 & ~DDR_CDR2_VREF_TRAIN_EN);
- } else
-#endif
- {
- out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2);
- out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2);
- }
-
- out_be32(&ddr->sdram_mode, DDR_SDRAM_MODE);
- out_be32(&ddr->sdram_mode_2, DDR_SDRAM_MODE_2);
-
- out_be32(&ddr->sdram_interval, DDR_SDRAM_INTERVAL);
-
- out_be32(&ddr->ddr_wrlvl_cntl, DDR_DDR_WRLVL_CNTL);
-
- out_be32(&ddr->ddr_wrlvl_cntl_2, DDR_DDR_WRLVL_CNTL_2);
- out_be32(&ddr->ddr_wrlvl_cntl_3, DDR_DDR_WRLVL_CNTL_3);
-
- out_be32(&ddr->ddr_cdr1, DDR_DDR_CDR1);
-
- out_be32(&ddr->sdram_clk_cntl, DDR_SDRAM_CLK_CNTL);
- out_be32(&ddr->ddr_zq_cntl, DDR_DDR_ZQ_CNTL);
-
- out_be32(&ddr->cs0_config_2, DDR_CS0_CONFIG_2);
-
- /* DDR erratum A-009942 */
- tmp = in_be32(&ddr->debug[28]);
- out_be32(&ddr->debug[28], tmp | 0x0070006f);
-
- udelay(1);
-
-#ifdef CONFIG_DEEP_SLEEP
- if (is_warm_boot()) {
- /* enter self-refresh */
- temp_sdram_cfg = in_be32(&ddr->sdram_cfg_2);
- temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
- out_be32(&ddr->sdram_cfg_2, temp_sdram_cfg);
-
- temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN | SDRAM_CFG_BI);
- } else
-#endif
- temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN & ~SDRAM_CFG_BI);
-
- out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | temp_sdram_cfg);
-
-#ifdef CONFIG_DEEP_SLEEP
- if (is_warm_boot()) {
- /* exit self-refresh */
- temp_sdram_cfg = in_be32(&ddr->sdram_cfg_2);
- temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
- out_be32(&ddr->sdram_cfg_2, temp_sdram_cfg);
- }
-#endif
-}
-
-int dram_init(void)
-{
-#if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
- ddrmc_init();
-#endif
-
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
-
-#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
- fsl_dp_resume();
-#endif
-
- return 0;
-}
-
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[1] = {
- {CONFIG_SYS_FSL_ESDHC_ADDR},
-};
-
-int board_mmc_init(bd_t *bis)
-{
- esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
- return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_TSEC_ENET
- struct fsl_pq_mdio_info mdio_info;
- struct tsec_info_struct tsec_info[4];
- int num = 0;
-
-#ifdef CONFIG_TSEC1
- SET_STD_TSEC_INFO(tsec_info[num], 1);
- if (is_serdes_configured(SGMII_TSEC1)) {
- puts("eTSEC1 is in sgmii mode.\n");
- tsec_info[num].flags |= TSEC_SGMII;
- }
- num++;
-#endif
-#ifdef CONFIG_TSEC2
- SET_STD_TSEC_INFO(tsec_info[num], 2);
- if (is_serdes_configured(SGMII_TSEC2)) {
- puts("eTSEC2 is in sgmii mode.\n");
- tsec_info[num].flags |= TSEC_SGMII;
- }
- num++;
-#endif
-#ifdef CONFIG_TSEC3
- SET_STD_TSEC_INFO(tsec_info[num], 3);
- tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
- num++;
-#endif
- if (!num) {
- printf("No TSECs initialized\n");
- return 0;
- }
-
- mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
- mdio_info.name = DEFAULT_MII_NAME;
- fsl_pq_mdio_init(bis, &mdio_info);
-
- tsec_eth_init(bis, tsec_info, num);
-#endif
-
- return pci_eth_init(bis);
-}
-
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
-static void convert_serdes_mux(int type, int need_reset)
-{
- char current_serdes;
- struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
- current_serdes = cpld_data->serdes_mux;
-
- switch (type) {
- case LANEB_SATA:
- current_serdes &= ~MASK_LANE_B;
- break;
- case LANEB_SGMII1:
- current_serdes |= (MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
- break;
- case LANEC_SGMII1:
- current_serdes &= ~(MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
- break;
- case LANED_SGMII2:
- current_serdes |= MASK_LANE_D;
- break;
- case LANEC_PCIEX1:
- current_serdes |= MASK_LANE_C;
- break;
- case (LANED_PCIEX2 | LANEC_PCIEX1):
- current_serdes |= MASK_LANE_C;
- current_serdes &= ~MASK_LANE_D;
- break;
- default:
- printf("CPLD serdes MUX: unsupported MUX type 0x%x\n", type);
- return;
- }
-
- cpld_data->soft_mux_on |= CPLD_SET_MUX_SERDES;
- cpld_data->serdes_mux = current_serdes;
-
- if (need_reset == 1) {
- printf("Reset board to enable configuration\n");
- cpld_data->system_rst = CONFIG_RESET;
- }
-}
-
-int config_serdes_mux(void)
-{
- struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
- u32 protocol = in_be32(&gur->rcwsr[4]) & RCWSR4_SRDS1_PRTCL_MASK;
-
- protocol >>= RCWSR4_SRDS1_PRTCL_SHIFT;
- switch (protocol) {
- case 0x10:
- convert_serdes_mux(LANEB_SATA, KEEP_STATUS);
- convert_serdes_mux(LANED_PCIEX2 |
- LANEC_PCIEX1, KEEP_STATUS);
- break;
- case 0x20:
- convert_serdes_mux(LANEB_SGMII1, KEEP_STATUS);
- convert_serdes_mux(LANEC_PCIEX1, KEEP_STATUS);
- convert_serdes_mux(LANED_SGMII2, KEEP_STATUS);
- break;
- case 0x30:
- convert_serdes_mux(LANEB_SATA, KEEP_STATUS);
- convert_serdes_mux(LANEC_SGMII1, KEEP_STATUS);
- convert_serdes_mux(LANED_SGMII2, KEEP_STATUS);
- break;
- case 0x70:
- convert_serdes_mux(LANEB_SATA, KEEP_STATUS);
- convert_serdes_mux(LANEC_PCIEX1, KEEP_STATUS);
- convert_serdes_mux(LANED_SGMII2, KEEP_STATUS);
- break;
- }
-
- return 0;
-}
-#endif
-
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
-int config_board_mux(void)
-{
- struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
- int conflict_flag;
-
- conflict_flag = 0;
- if (hwconfig("i2c3")) {
- conflict_flag++;
- cpld_data->soft_mux_on |= SOFT_MUX_ON_I2C3_IFC;
- cpld_data->i2c3_ifc_mux = PIN_I2C3_IFC_MUX_I2C3;
- }
-
- if (hwconfig("ifc")) {
- conflict_flag++;
- /* some signals can not enable simultaneous*/
- if (conflict_flag > 1)
- goto conflict;
- cpld_data->soft_mux_on |= SOFT_MUX_ON_I2C3_IFC;
- cpld_data->i2c3_ifc_mux = PIN_I2C3_IFC_MUX_IFC;
- }
-
- conflict_flag = 0;
- if (hwconfig("usb2")) {
- conflict_flag++;
- cpld_data->soft_mux_on |= SOFT_MUX_ON_CAN3_USB2;
- cpld_data->can3_usb2_mux = PIN_CAN3_USB2_MUX_USB2;
- }
-
- if (hwconfig("can3")) {
- conflict_flag++;
- /* some signals can not enable simultaneous*/
- if (conflict_flag > 1)
- goto conflict;
- cpld_data->soft_mux_on |= SOFT_MUX_ON_CAN3_USB2;
- cpld_data->can3_usb2_mux = PIN_CAN3_USB2_MUX_CAN3;
- }
-
- conflict_flag = 0;
- if (hwconfig("lcd")) {
- conflict_flag++;
- cpld_data->soft_mux_on |= SOFT_MUX_ON_QE_LCD;
- cpld_data->qe_lcd_mux = PIN_QE_LCD_MUX_LCD;
- }
-
- if (hwconfig("qe")) {
- conflict_flag++;
- /* some signals can not enable simultaneous*/
- if (conflict_flag > 1)
- goto conflict;
- cpld_data->soft_mux_on |= SOFT_MUX_ON_QE_LCD;
- cpld_data->qe_lcd_mux = PIN_QE_LCD_MUX_QE;
- }
-
- return 0;
-
-conflict:
- printf("WARNING: pin conflict! MUX setting may failed!\n");
- return 0;
-}
-#endif
-
-int board_early_init_f(void)
-{
- struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
-
-#ifdef CONFIG_TSEC_ENET
- /* clear BD & FR bits for BE BD's and frame data */
- clrbits_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
- out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
-#endif
-
-#ifdef CONFIG_FSL_IFC
- init_early_memctl_regs();
-#endif
-
- arch_soc_init();
-
-#if defined(CONFIG_DEEP_SLEEP)
- if (is_warm_boot()) {
- timer_init();
- dram_init();
- }
-#endif
-
- return 0;
-}
-
-#ifdef CONFIG_SPL_BUILD
-void board_init_f(ulong dummy)
-{
- void (*second_uboot)(void);
-
- /* Clear the BSS */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- get_clocks();
-
-#if defined(CONFIG_DEEP_SLEEP)
- if (is_warm_boot())
- fsl_dp_disable_console();
-#endif
-
- preloader_console_init();
-
- dram_init();
-
- /* Allow OCRAM access permission as R/W */
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
- enable_layerscape_ns_access();
-#endif
-
- /*
- * if it is woken up from deep sleep, then jump to second
- * stage uboot and continue executing without recopying
- * it from SD since it has already been reserved in memeory
- * in last boot.
- */
- if (is_warm_boot()) {
- second_uboot = (void (*)(void))CONFIG_SYS_TEXT_BASE;
- second_uboot();
- }
-
- board_init_r(NULL, 0);
-}
-#endif
-
-#ifdef CONFIG_DEEP_SLEEP
-/* program the regulator (MC34VR500) to support deep sleep */
-void ls1twr_program_regulator(void)
-{
- unsigned int i2c_bus;
- u8 i2c_device_id;
-
-#define LS1TWR_I2C_BUS_MC34VR500 1
-#define MC34VR500_ADDR 0x8
-#define MC34VR500_DEVICEID 0x4
-#define MC34VR500_DEVICEID_MASK 0x0f
-
- i2c_bus = i2c_get_bus_num();
- i2c_set_bus_num(LS1TWR_I2C_BUS_MC34VR500);
- i2c_device_id = i2c_reg_read(MC34VR500_ADDR, 0x0) &
- MC34VR500_DEVICEID_MASK;
- if (i2c_device_id != MC34VR500_DEVICEID) {
- printf("The regulator (MC34VR500) does not exist. The device
does not support deep sleep.\n");
- return;
- }
-
- i2c_reg_write(MC34VR500_ADDR, 0x31, 0x4);
- i2c_reg_write(MC34VR500_ADDR, 0x4d, 0x4);
- i2c_reg_write(MC34VR500_ADDR, 0x6d, 0x38);
- i2c_reg_write(MC34VR500_ADDR, 0x6f, 0x37);
- i2c_reg_write(MC34VR500_ADDR, 0x71, 0x30);
-
- i2c_set_bus_num(i2c_bus);
-}
-#endif
-
-int board_init(void)
-{
-#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
- erratum_a010315();
-#endif
-
-#ifndef CONFIG_SYS_FSL_NO_SERDES
- fsl_serdes_init();
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
- config_serdes_mux();
-#endif
-#endif
-
- ls102xa_smmu_stream_id_init();
-
-#ifdef CONFIG_U_QE
- u_qe_init();
-#endif
-
-#ifdef CONFIG_DEEP_SLEEP
- ls1twr_program_regulator();
-#endif
- return 0;
-}
-
-#if defined(CONFIG_SPL_BUILD)
-void spl_board_init(void)
-{
- ls102xa_smmu_stream_id_init();
-}
-#endif
-
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-#ifdef CONFIG_CHAIN_OF_TRUST
- fsl_setenv_chain_of_trust();
-#endif
-
- return 0;
-}
-#endif
-
-#if defined(CONFIG_MISC_INIT_R)
-int misc_init_r(void)
-{
-#ifdef CONFIG_FSL_DEVICE_DISABLE
- device_disable(devdis_tbl, ARRAY_SIZE(devdis_tbl));
-#endif
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
- config_board_mux();
-#endif
-
-#ifdef CONFIG_FSL_CAAM
- return sec_init();
-#endif
-}
-#endif
-
-#if defined(CONFIG_DEEP_SLEEP)
-void board_sleep_prepare(void)
-{
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
- enable_layerscape_ns_access();
-#endif
-}
-#endif
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
-
-#ifdef CONFIG_PCI
- ft_pci_setup(blob, bd);
-#endif
-
- return 0;
-}
-
-u8 flash_read8(void *addr)
-{
- return __raw_readb(addr + 1);
-}
-
-void flash_write16(u16 val, void *addr)
-{
- u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
-
- __raw_writew(shftval, addr);
-}
-
-u16 flash_read16(void *addr)
-{
- u16 val = __raw_readw(addr);
-
- return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
-}
-
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) \
- && !defined(CONFIG_SPL_BUILD)
-static void convert_flash_bank(char bank)
-{
- struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
- printf("Now switch to boot from flash bank %d.\n", bank);
- cpld_data->soft_mux_on = CPLD_SET_BOOT_BANK;
- cpld_data->vbank = bank;
-
- printf("Reset board to enable configuration.\n");
- cpld_data->system_rst = CONFIG_RESET;
-}
-
-static int flash_bank_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
-{
- if (argc != 2)
- return CMD_RET_USAGE;
- if (strcmp(argv[1], "0") == 0)
- convert_flash_bank(BOOT_FROM_UPPER_BANK);
- else if (strcmp(argv[1], "1") == 0)
- convert_flash_bank(BOOT_FROM_LOWER_BANK);
- else
- return CMD_RET_USAGE;
-
- return 0;
-}
-
-U_BOOT_CMD(
- boot_bank, 2, 0, flash_bank_cmd,
- "Flash bank Selection Control",
- "bank[0-upper bank/1-lower bank] (e.g. boot_bank 0)"
-);
-
-static int cpld_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
-{
- struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
- if (argc > 2)
- return CMD_RET_USAGE;
- if ((argc == 1) || (strcmp(argv[1], "conf") == 0))
- cpld_data->system_rst = CONFIG_RESET;
- else if (strcmp(argv[1], "init") == 0)
- cpld_data->global_rst = INIT_RESET;
- else
- return CMD_RET_USAGE;
-
- return 0;
-}
-
-U_BOOT_CMD(
- cpld_reset, 2, 0, cpld_reset_cmd,
- "Reset via CPLD",
- "conf\n"
- " -reset with current CPLD configuration\n"
- "init\n"
- " -reset and initial CPLD configuration with default value"
-
-);
-
-static void print_serdes_mux(void)
-{
- char current_serdes;
- struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
-
- current_serdes = cpld_data->serdes_mux;
-
- printf("Serdes Lane B: ");
- if ((current_serdes & MASK_LANE_B) == 0)
- printf("SATA,\n");
- else
- printf("SGMII 1,\n");
-
- printf("Serdes Lane C: ");
- if ((current_serdes & MASK_LANE_C) == 0)
- printf("SGMII 1,\n");
- else
- printf("PCIe,\n");
-
- printf("Serdes Lane D: ");
- if ((current_serdes & MASK_LANE_D) == 0)
- printf("PCIe,\n");
- else
- printf("SGMII 2,\n");
-
- printf("SGMII 1 is on lane ");
- if ((current_serdes & MASK_SGMII) == 0)
- printf("C.\n");
- else
- printf("B.\n");
-}
-
-static int serdes_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
-{
- if (argc != 2)
- return CMD_RET_USAGE;
- if (strcmp(argv[1], "sata") == 0) {
- printf("Set serdes lane B to SATA.\n");
- convert_serdes_mux(LANEB_SATA, NEED_RESET);
- } else if (strcmp(argv[1], "sgmii1b") == 0) {
- printf("Set serdes lane B to SGMII 1.\n");
- convert_serdes_mux(LANEB_SGMII1, NEED_RESET);
- } else if (strcmp(argv[1], "sgmii1c") == 0) {
- printf("Set serdes lane C to SGMII 1.\n");
- convert_serdes_mux(LANEC_SGMII1, NEED_RESET);
- } else if (strcmp(argv[1], "sgmii2") == 0) {
- printf("Set serdes lane D to SGMII 2.\n");
- convert_serdes_mux(LANED_SGMII2, NEED_RESET);
- } else if (strcmp(argv[1], "pciex1") == 0) {
- printf("Set serdes lane C to PCIe X1.\n");
- convert_serdes_mux(LANEC_PCIEX1, NEED_RESET);
- } else if (strcmp(argv[1], "pciex2") == 0) {
- printf("Set serdes lane C & lane D to PCIe X2.\n");
- convert_serdes_mux((LANED_PCIEX2 | LANEC_PCIEX1), NEED_RESET);
- } else if (strcmp(argv[1], "show") == 0) {
- print_serdes_mux();
- } else {
- return CMD_RET_USAGE;
- }
-
- return 0;
-}
-
-U_BOOT_CMD(
- lane_bank, 2, 0, serdes_mux_cmd,
- "Multiplexed function setting for SerDes Lanes",
- "sata\n"
- " -change lane B to sata\n"
- "lane_bank sgmii1b\n"
- " -change lane B to SGMII1\n"
- "lane_bank sgmii1c\n"
- " -change lane C to SGMII1\n"
- "lane_bank sgmii2\n"
- " -change lane D to SGMII2\n"
- "lane_bank pciex1\n"
- " -change lane C to PCIeX1\n"
- "lane_bank pciex2\n"
- " -change lane C & lane D to PCIeX2\n"
- "\nWARNING: If you aren't familiar with the setting of serdes, don't
try to change anything!\n"
-);
-#endif
diff --git a/board/freescale/ls1021atwr/ls102xa_pbi.cfg
b/board/freescale/ls1021atwr/ls102xa_pbi.cfg
deleted file mode 100644
index f1a1b63ab77..00000000000
--- a/board/freescale/ls1021atwr/ls102xa_pbi.cfg
+++ /dev/null
@@ -1,12 +0,0 @@
-#PBI commands
-
-09570200 ffffffff
-09570158 00000300
-8940007c 21f47300
-
-#Configure Scratch register
-09ee0200 10000000
-#Configure alternate space
-09570158 00001000
-#Flush PBL data
-096100c0 000FFFFF
diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
b/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
deleted file mode 100644
index f94997d5384..00000000000
--- a/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
+++ /dev/null
@@ -1,8 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 01ee0100
-
-#enable IFC, disable QSPI and DSPI
-0608000c 00000000 00000000 00000000
-30000000 00007900 60040a00 21046000
-00000000 00000000 00000000 20000000
-00080000 881b7340 00000000 00000000
diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
b/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
deleted file mode 100644
index 541b604cffc..00000000000
--- a/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
+++ /dev/null
@@ -1,8 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 01ee0100
-
-#disable IFC, enable QSPI and DSPI
-0608000c 00000000 00000000 00000000
-30000000 00007900 60040a00 21046000
-00000000 00000000 00000000 20000000
-20024800 881b7340 00000000 00000000
diff --git a/board/freescale/ls1021atwr/psci.S
b/board/freescale/ls1021atwr/psci.S
deleted file mode 100644
index 3c093aa33cb..00000000000
--- a/board/freescale/ls1021atwr/psci.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2016 NXP Semiconductor.
- * Author: Wang Dongsheng <dongsheng.w...@freescale.com>
- */
-
-#include <config.h>
-#include <linux/linkage.h>
-
-#include <asm/armv7.h>
-#include <asm/psci.h>
-
- .pushsection ._secure.text, "ax"
-
- .arch_extension sec
-
- .align 5
-
-.globl psci_system_off
-psci_system_off:
-1: wfi
- b 1b
-
- .popsection
diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
deleted file mode 100644
index 97ffa21228e..00000000000
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS1021ATWR=y
-CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_SECURE_BOOT=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_MISC_INIT_R=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_BMP=y
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
-CONFIG_DM=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
deleted file mode 100644
index 582f52151fa..00000000000
--- a/configs/ls1021atwr_nor_defconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS1021ATWR=y
-CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_MISC_INIT_R=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_BMP=y
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_DM=y
-CONFIG_SATA_CEVA=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
-CONFIG_DM_SCSI=y
-CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021atwr_nor_lpuart_defconfig
b/configs/ls1021atwr_nor_lpuart_defconfig
deleted file mode 100644
index a567c07062c..00000000000
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS1021ATWR=y
-CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_MISC_INIT_R=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_BMP=y
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-lpuart"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
-CONFIG_DM_SERIAL=y
-CONFIG_FSL_LPUART=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021atwr_qspi_defconfig
b/configs/ls1021atwr_qspi_defconfig
deleted file mode 100644
index 1bcf56aa5d6..00000000000
--- a/configs/ls1021atwr_qspi_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS1021ATWR=y
-CONFIG_SYS_TEXT_BASE=0x40100000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
-CONFIG_QSPI_BOOT=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_MISC_INIT_R=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_BMP=y
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_DSPI=y
-CONFIG_FSL_QSPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
deleted file mode 100644
index 44e59d2acc0..00000000000
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS1021ATWR=y
-CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
-CONFIG_BOOTDELAY=0
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_MISC_INIT_R=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
-CONFIG_SPL_CRYPTO_SUPPORT=y
-CONFIG_SPL_HASH_SUPPORT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_BMP=y
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
-CONFIG_DM=y
-CONFIG_SPL_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig
b/configs/ls1021atwr_sdcard_ifc_defconfig
deleted file mode 100644
index 4824a83fb46..00000000000
--- a/configs/ls1021atwr_sdcard_ifc_defconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS1021ATWR=y
-CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
-CONFIG_SD_BOOT=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_MISC_INIT_R=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_BMP=y
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig
b/configs/ls1021atwr_sdcard_qspi_defconfig
deleted file mode 100644
index 4b01bc42f0e..00000000000
--- a/configs/ls1021atwr_sdcard_qspi_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS1021ATWR=y
-CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
-CONFIG_SD_BOOT=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_MISC_INIT_R=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_BMP=y
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_DSPI=y
-CONFIG_FSL_QSPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
deleted file mode 100644
index 2c91ae783b5..00000000000
--- a/include/configs/ls1021atwr.h
+++ /dev/null
@@ -1,505 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ARMV7_PSCI_1_0
-
-#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
-
-#define CONFIG_SYS_FSL_CLK
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_DEEP_SLEEP
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
-
-#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
-
-#define CONFIG_SYS_CLK_FREQ 100000000
-#define CONFIG_DDR_CLK_FREQ 100000000
-
-#define DDR_SDRAM_CFG 0x470c0008
-#define DDR_CS0_BNDS 0x008000bf
-#define DDR_CS0_CONFIG 0x80014302
-#define DDR_TIMING_CFG_0 0x50550004
-#define DDR_TIMING_CFG_1 0xbcb38c56
-#define DDR_TIMING_CFG_2 0x0040d120
-#define DDR_TIMING_CFG_3 0x010e1000
-#define DDR_TIMING_CFG_4 0x00000001
-#define DDR_TIMING_CFG_5 0x03401400
-#define DDR_SDRAM_CFG_2 0x00401010
-#define DDR_SDRAM_MODE 0x00061c60
-#define DDR_SDRAM_MODE_2 0x00180000
-#define DDR_SDRAM_INTERVAL 0x18600618
-#define DDR_DDR_WRLVL_CNTL 0x8655f605
-#define DDR_DDR_WRLVL_CNTL_2 0x05060607
-#define DDR_DDR_WRLVL_CNTL_3 0x05050505
-#define DDR_DDR_CDR1 0x80040000
-#define DDR_DDR_CDR2 0x00000001
-#define DDR_SDRAM_CLK_CNTL 0x02000000
-#define DDR_DDR_ZQ_CNTL 0x89080600
-#define DDR_CS0_CONFIG_2 0
-#define DDR_SDRAM_CFG_MEM_EN 0x80000000
-#define SDRAM_CFG2_D_INIT 0x00000010
-#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
-#define SDRAM_CFG2_FRC_SR 0x80000000
-#define SDRAM_CFG_BI 0x00000001
-
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
-#endif
-
-#ifdef CONFIG_SD_BOOT
-#ifdef CONFIG_SD_BOOT_QSPI
-#define CONFIG_SYS_FSL_PBL_RCW \
- board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
-#else
-#define CONFIG_SYS_FSL_PBL_RCW \
- board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
-#endif
-
-#ifdef CONFIG_SECURE_BOOT
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image.
- */
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
-
-#define CONFIG_SPL_TEXT_BASE 0x10000000
-#define CONFIG_SPL_MAX_SIZE 0x1a000
-#define CONFIG_SPL_STACK 0x1001d000
-#define CONFIG_SPL_PAD_TO 0x1c000
-
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
- CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-#define CONFIG_SPL_BSS_START_ADDR 0x80100000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-
-#ifdef CONFIG_U_BOOT_HDR_SIZE
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
-#else
-#define CONFIG_SYS_MONITOR_LEN 0x100000
-#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
-#endif
-
-#define PHYS_SDRAM 0x80000000
-#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
-
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-
-#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
- !defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#endif
-
-/*
- * IFC Definitions
- */
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_FSL_IFC
-#define CONFIG_SYS_FLASH_BASE 0x60000000
-#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
-#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
-
-/* NOR Flash Timing Params */
-#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
- CSOR_NOR_TRHZ_80)
-#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
- FTIM0_NOR_TEADC(0x5) | \
- FTIM0_NOR_TAVDS(0x0) | \
- FTIM0_NOR_TEAHC(0x5))
-#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
- FTIM1_NOR_TRAD_NOR(0x1A) | \
- FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
- FTIM2_NOR_TCH(0x4) | \
- FTIM2_NOR_TWP(0x1c) | \
- FTIM2_NOR_TWPH(0x0e))
-#define CONFIG_SYS_NOR_FTIM3 0
-
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
-
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
-#define CONFIG_SYS_WRITE_SWAPPED_DATA
-#endif
-
-/* CPLD */
-
-#define CONFIG_SYS_CPLD_BASE 0x7fb00000
-#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
-
-#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
-#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
- CSPR_PORT_SIZE_8 | \
- CSPR_MSEL_GPCM | \
- CSPR_V)
-#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
-#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
- CSOR_NOR_NOR_MODE_AVD_NOR | \
- CSOR_NOR_TRHZ_80)
-
-/* CPLD Timing parameters for IFC GPCM */
-#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \
- FTIM0_GPCM_TEADC(0xf) | \
- FTIM0_GPCM_TEAHC(0xf))
-#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
- FTIM1_GPCM_TRAD(0x3f))
-#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
- FTIM2_GPCM_TCH(0xf) | \
- FTIM2_GPCM_TWP(0xff))
-#define CONFIG_SYS_FPGA_FTIM3 0x0
-#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
-#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
-#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
-#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
-#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
-#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
-#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
-#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
-
-/*
- * Serial Port
- */
-#ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
-#else
-#define CONFIG_SYS_NS16550_SERIAL
-#ifndef CONFIG_DM_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#endif
-#define CONFIG_SYS_NS16550_CLK get_serial_clock()
-#endif
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-
-/* EEPROM */
-#define CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM 1
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-
-/*
- * MMC
- */
-
-/* SPI */
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-/* QSPI */
-#define QSPI0_AMBA_BASE 0x40000000
-#define FSL_QSPI_FLASH_SIZE (1 << 24)
-#define FSL_QSPI_FLASH_NUM 2
-
-/* DSPI */
-#endif
-
-/* DM SPI */
-#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
-#define CONFIG_DM_SPI_FLASH
-#endif
-
-/*
- * Video
- */
-#ifdef CONFIG_VIDEO_FSL_DCU_FB
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-
-#define CONFIG_FSL_DCU_SII9022A
-#define CONFIG_SYS_I2C_DVI_BUS_NUM 1
-#define CONFIG_SYS_I2C_DVI_ADDR 0x39
-#endif
-
-/*
- * eTSEC
- */
-
-#ifdef CONFIG_TSEC_ENET
-#define CONFIG_MII_DEFAULT_TSEC 1
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "eTSEC1"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "eTSEC2"
-#define CONFIG_TSEC3 1
-#define CONFIG_TSEC3_NAME "eTSEC3"
-
-#define TSEC1_PHY_ADDR 2
-#define TSEC2_PHY_ADDR 0
-#define TSEC3_PHY_ADDR 1
-
-#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC3_PHYIDX 0
-
-#define CONFIG_ETHPRIME "eTSEC1"
-
-#define CONFIG_PHY_ATHEROS
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#endif
-
-/* PCIe */
-#define CONFIG_PCIE1 /* PCIE controller 1 */
-#define CONFIG_PCIE2 /* PCIE controller 2 */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
-#define CONFIG_CMDLINE_TAG
-
-#define CONFIG_PEN_ADDR_BIG_ENDIAN
-#define CONFIG_LAYERSCAPE_NS_ACCESS
-#define CONFIG_SMP_PEN_ADDR 0x01ee0200
-#define COUNTER_FREQUENCY 12500000
-
-#define CONFIG_HWCONFIG
-#define HWCONFIG_BUFFER_SIZE 256
-
-#define CONFIG_FSL_DEVICE_DISABLE
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(USB, usb, 0)
-#include <config_distro_bootcmd.h>
-
-#ifdef CONFIG_LPUART
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0" \
- "fdt_addr=0x64f00000\0" \
- "kernel_addr=0x65000000\0" \
- "scriptaddr=0x80000000\0" \
- "scripthdraddr=0x80080000\0" \
- "fdtheader_addr_r=0x80100000\0" \
- "kernelheader_addr_r=0x80200000\0" \
- "kernel_addr_r=0x81000000\0" \
- "fdt_addr_r=0x90000000\0" \
- "ramdisk_addr_r=0xa0000000\0" \
- "load_addr=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "kernel_addr_sd=0x8000\0" \
- "kernel_size_sd=0x14000\0" \
- BOOTENV \
- "boot_scripts=ls1021atwr_boot.scr\0" \
- "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
- "scan_dev_for_boot_part=" \
- "part list ${devtype} ${devnum} devplist; " \
- "env exists devplist || setenv devplist 1; " \
- "for distro_bootpart in ${devplist}; do " \
- "if fstype ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "bootfstype; then " \
- "run scan_dev_for_boot; " \
- "fi; " \
- "done\0" \
- "scan_dev_for_boot=" \
- "echo Scanning ${devtype} " \
- "${devnum}:${distro_bootpart}...; " \
- "for prefix in ${boot_prefixes}; do " \
- "run scan_dev_for_scripts; " \
- "done;" \
- "\0" \
- "boot_a_script=" \
- "load ${devtype} ${devnum}:${distro_bootpart} " \
- "${scriptaddr} ${prefix}${script}; " \
- "env exists secureboot && load ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "${scripthdraddr} ${prefix}${boot_script_hdr} " \
- "&& esbc_validate ${scripthdraddr};" \
- "source ${scriptaddr}\0" \
- "installer=load mmc 0:2 $load_addr " \
- "/flex_installer_arm32.itb; " \
- "bootm $load_addr#ls1021atwr\0" \
- "qspi_bootcmd=echo Trying load from qspi..;" \
- "sf probe && sf read $load_addr " \
- "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
\
- "nor_bootcmd=echo Trying load from nor..;" \
- "cp.b $kernel_addr $load_addr " \
- "$kernel_size && bootm $load_addr#$board\0"
-#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0" \
- "fdt_addr=0x64f00000\0" \
- "kernel_addr=0x61000000\0" \
- "kernelheader_addr=0x60800000\0" \
- "scriptaddr=0x80000000\0" \
- "scripthdraddr=0x80080000\0" \
- "fdtheader_addr_r=0x80100000\0" \
- "kernelheader_addr_r=0x80200000\0" \
- "kernel_addr_r=0x81000000\0" \
- "kernelheader_size=0x40000\0" \
- "fdt_addr_r=0x90000000\0" \
- "ramdisk_addr_r=0xa0000000\0" \
- "load_addr=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "kernel_addr_sd=0x8000\0" \
- "kernel_size_sd=0x14000\0" \
- "kernelhdr_addr_sd=0x4000\0" \
- "kernelhdr_size_sd=0x10\0" \
- BOOTENV \
- "boot_scripts=ls1021atwr_boot.scr\0" \
- "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
- "scan_dev_for_boot_part=" \
- "part list ${devtype} ${devnum} devplist; " \
- "env exists devplist || setenv devplist 1; " \
- "for distro_bootpart in ${devplist}; do " \
- "if fstype ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "bootfstype; then " \
- "run scan_dev_for_boot; " \
- "fi; " \
- "done\0" \
- "scan_dev_for_boot=" \
- "echo Scanning ${devtype} " \
- "${devnum}:${distro_bootpart}...; " \
- "for prefix in ${boot_prefixes}; do " \
- "run scan_dev_for_scripts; " \
- "done;" \
- "\0" \
- "boot_a_script=" \
- "load ${devtype} ${devnum}:${distro_bootpart} " \
- "${scriptaddr} ${prefix}${script}; " \
- "env exists secureboot && load ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "${scripthdraddr} ${prefix}${boot_script_hdr} " \
- "&& esbc_validate ${scripthdraddr};" \
- "source ${scriptaddr}\0" \
- "qspi_bootcmd=echo Trying load from qspi..;" \
- "sf probe && sf read $load_addr " \
- "$kernel_addr $kernel_size; env exists secureboot " \
- "&& sf read $kernelheader_addr_r $kernelheader_addr " \
- "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
- "bootm $load_addr#$board\0" \
- "nor_bootcmd=echo Trying load from nor..;" \
- "cp.b $kernel_addr $load_addr " \
- "$kernel_size; env exists secureboot " \
- "&& cp.b $kernelheader_addr $kernelheader_addr_r " \
- "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
- "bootm $load_addr#$board\0" \
- "sd_bootcmd=echo Trying load from SD ..;" \
- "mmcinfo && mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
- "env exists secureboot && mmc read $kernelheader_addr_r "
\
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0"
-#endif
-
-#undef CONFIG_BOOTCOMMAND
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd" \
- "env exists secureboot && esbc_halt"
-#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \
- "env exists secureboot && esbc_halt;"
-#else
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;" \
- "env exists secureboot && esbc_halt;"
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END 0x9fffffff
-
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
-#define CONFIG_LS102XA_STREAM_ID
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
-#define CONFIG_SYS_QE_FW_ADDR 0x60940000
-
-/*
- * Environment
- */
-#define CONFIG_ENV_OVERWRITE
-
-#if defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET 0x300000
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_ENV_SIZE 0x20000
-#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_OFFSET 0x300000
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#else
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE +
0x300000)
-#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
-#endif
-
-#include <asm/fsl_secure_boot.h>
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-#endif
--
2.19.1.1215.g8438c0b245-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
