This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/mach-imx/mx6/Kconfig | 1 -
board/freescale/mx6sabresd/Kconfig | 12 -
board/freescale/mx6sabresd/MAINTAINERS | 6 -
board/freescale/mx6sabresd/Makefile | 7 -
board/freescale/mx6sabresd/README | 114 ---
board/freescale/mx6sabresd/mx6sabresd.c | 1064 -----------------------
configs/mx6sabresd_defconfig | 75 --
include/configs/mx6sabresd.h | 67 --
8 files changed, 1346 deletions(-)
delete mode 100644 board/freescale/mx6sabresd/Kconfig
delete mode 100644 board/freescale/mx6sabresd/MAINTAINERS
delete mode 100644 board/freescale/mx6sabresd/Makefile
delete mode 100644 board/freescale/mx6sabresd/README
delete mode 100644 board/freescale/mx6sabresd/mx6sabresd.c
delete mode 100644 configs/mx6sabresd_defconfig
delete mode 100644 include/configs/mx6sabresd.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 0859619af3b..e96deadf72d 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -535,7 +535,6 @@ source "board/engicam/imx6q/Kconfig"
source "board/engicam/imx6ul/Kconfig"
source "board/freescale/mx6qarm2/Kconfig"
source "board/freescale/mx6memcal/Kconfig"
-source "board/freescale/mx6sabresd/Kconfig"
source "board/freescale/mx6slevk/Kconfig"
source "board/freescale/mx6sllevk/Kconfig"
source "board/freescale/mx6sxsabresd/Kconfig"
diff --git a/board/freescale/mx6sabresd/Kconfig
b/board/freescale/mx6sabresd/Kconfig
deleted file mode 100644
index e87dea0d7a2..00000000000
--- a/board/freescale/mx6sabresd/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MX6SABRESD
-
-config SYS_BOARD
- default "mx6sabresd"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "mx6sabresd"
-
-endif
diff --git a/board/freescale/mx6sabresd/MAINTAINERS
b/board/freescale/mx6sabresd/MAINTAINERS
deleted file mode 100644
index 95752619e78..00000000000
--- a/board/freescale/mx6sabresd/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MX6SABRESD BOARD
-M: Fabio Estevam <fabio.este...@nxp.com>
-S: Maintained
-F: board/freescale/mx6sabresd/
-F: include/configs/mx6sabresd.h
-F: configs/mx6sabresd_defconfig
diff --git a/board/freescale/mx6sabresd/Makefile
b/board/freescale/mx6sabresd/Makefile
deleted file mode 100644
index 92e1ff72a4f..00000000000
--- a/board/freescale/mx6sabresd/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <l...@denx.de>
-#
-# (C) Copyright 2011 Freescale Semiconductor, Inc.
-
-obj-y := mx6sabresd.o
diff --git a/board/freescale/mx6sabresd/README
b/board/freescale/mx6sabresd/README
deleted file mode 100644
index 4b4df063300..00000000000
--- a/board/freescale/mx6sabresd/README
+++ /dev/null
@@ -1,114 +0,0 @@
-How to use and build U-Boot on mx6sabresd
------------------------------------------
-
-The following methods can be used for booting mx6sabresd boards:
-
-1. Booting from SD card
-
-2. Booting from eMMC
-
-3. Booting via Falcon mode (SPL launches the kernel directly)
-
-
-1. Booting from SD card via SPL
--------------------------------
-
-mx6sabresd_defconfig target supports mx6q/mx6dl/mx6qp sabresd variants.
-
-In order to build it:
-
-$ make mx6sabresd_defconfig
-
-$ make
-
-This will generate the SPL and u-boot.img binaries.
-
-- Flash the SPL binary into the SD card:
-
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
-
-- Flash the u-boot.img binary into the SD card:
-
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
-
-
-2. Booting from eMMC
---------------------
-
-$ make mx6sabresd_defconfig
-
-$ make
-
-This will generate the SPL and u-boot.img binaries.
-
-- Boot first from SD card as shown in the previous section
-
-In U-boot change the eMMC partition config:
-
-=> mmc partconf 2 1 0 0
-
-Mount the eMMC in the host PC:
-
-=> ums 0 mmc 2
-
-- Flash SPL and u-boot.img binaries into the eMMC:
-
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
-
-Set SW6 to eMMC 8-bit boot: 11010110
-
-
-3. Booting via Falcon mode
---------------------------
-
-$ make mx6sabresd_defconfig
-$ make
-
-This will generate the SPL image called SPL and the u-boot.img.
-
-- Flash the SPL image into the SD card:
-
-$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none && sync
-
-- Flash the u-boot.img image into the SD card:
-
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none &&
sync
-
-Create a partition for root file system and extract it there:
-
-$ sudo tar xvf rootfs.tar.gz -C /media/root
-
-The SD card must have enough space for raw "args" and "kernel".
-To configure Falcon mode for the first time, on U-Boot do the following
commands:
-
-- Setup the IP server:
-
-# setenv serverip <server_ip_address>
-
-- Download dtb file:
-
-# dhcp ${fdt_addr} imx6q-sabresd.dtb
-
-- Download kernel image:
-
-# dhcp ${loadaddr} uImage
-
-- Write kernel at 2MB offset:
-
-# mmc write ${loadaddr} 0x1000 0x4000
-
-- Setup kernel bootargs:
-
-# setenv bootargs "console=ttymxc0,115200 root=/dev/mmcblk1p1 rootfstype=ext4
rootwait quiet rw"
-
-- Prepare args:
-
-# spl export fdt ${loadaddr} - ${fdt_addr}
-
-- Write args 1MB data (0x800 sectors) to 1MB offset (0x800 sectors)
-
-# mmc write 18000000 0x800 0x800
-
-- Press KEY_VOL_UP key, power up the board and then SPL binary will
-launch the kernel directly.
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c
b/board/freescale/mx6sabresd/mx6sabresd.c
deleted file mode 100644
index 0183ede148c..00000000000
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ /dev/null
@@ -1,1064 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.este...@freescale.com>
- */
-
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/mach-imx/spi.h>
-#include <linux/errno.h>
-#include <asm/gpio.h>
-#include <asm/mach-imx/mxc_i2c.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/boot_mode.h>
-#include <asm/mach-imx/video.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/arch/mxc_hdmi.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <i2c.h>
-#include <input.h>
-#include <power/pmic.h>
-#include <power/pfuze100_pmic.h>
-#include "../common/pfuze.h"
-#include <usb.h>
-#include <usb/ehci-ci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
- PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
-#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-
-#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
- PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-#define I2C_PMIC 1
-
-#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
-
-#define DISP0_PWR_EN IMX_GPIO_NR(1, 21)
-
-#define KEY_VOL_UP IMX_GPIO_NR(1, 4)
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
- return 0;
-}
-
-static iomux_v3_cfg_t const uart1_pads[] = {
- IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
- IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const enet_pads[] = {
- IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
MUX_PAD_CTRL(ENET_PAD_CTRL)),
- /* AR8031 PHY Reset */
- IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static void setup_iomux_enet(void)
-{
- SETUP_IOMUX_PADS(enet_pads);
-
- /* Reset AR8031 PHY */
- gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
- mdelay(10);
- gpio_set_value(IMX_GPIO_NR(1, 25), 1);
- udelay(100);
-}
-
-static iomux_v3_cfg_t const usdhc2_pads[] = {
- IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D4__SD2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D5__SD2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D6__SD2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D7__SD2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
/* CD */
-};
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
- IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), /*
CD */
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
- IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const ecspi1_pads[] = {
- IOMUX_PADS(PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
- IOMUX_PADS(PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
- IOMUX_PADS(PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
- IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const rgb_pads[] = {
- IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DI0_PIN4__IPU1_DI0_PIN04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT0__IPU1_DISP0_DATA00 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT1__IPU1_DISP0_DATA01 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT2__IPU1_DISP0_DATA02 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT3__IPU1_DISP0_DATA03 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT4__IPU1_DISP0_DATA04 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT5__IPU1_DISP0_DATA05 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT6__IPU1_DISP0_DATA06 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT7__IPU1_DISP0_DATA07 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT8__IPU1_DISP0_DATA08 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT9__IPU1_DISP0_DATA09 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT10__IPU1_DISP0_DATA10 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT11__IPU1_DISP0_DATA11 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT12__IPU1_DISP0_DATA12 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT13__IPU1_DISP0_DATA13 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT14__IPU1_DISP0_DATA14 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT15__IPU1_DISP0_DATA15 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT16__IPU1_DISP0_DATA16 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT17__IPU1_DISP0_DATA17 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT18__IPU1_DISP0_DATA18 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT19__IPU1_DISP0_DATA19 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT20__IPU1_DISP0_DATA20 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT21__IPU1_DISP0_DATA21 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT22__IPU1_DISP0_DATA22 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_DISP0_DAT23__IPU1_DISP0_DATA23 |
MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const bl_pads[] = {
- IOMUX_PADS(PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static void enable_backlight(void)
-{
- SETUP_IOMUX_PADS(bl_pads);
- gpio_direction_output(DISP0_PWR_EN, 1);
-}
-
-static void enable_rgb(struct display_info_t const *dev)
-{
- SETUP_IOMUX_PADS(rgb_pads);
- enable_backlight();
-}
-
-static void enable_lvds(struct display_info_t const *dev)
-{
- enable_backlight();
-}
-
-static struct i2c_pads_info mx6q_i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
- .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
- .gp = IMX_GPIO_NR(4, 12)
- },
- .sda = {
- .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
- .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
- .gp = IMX_GPIO_NR(4, 13)
- }
-};
-
-static struct i2c_pads_info mx6dl_i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
- .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
- .gp = IMX_GPIO_NR(4, 12)
- },
- .sda = {
- .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
- .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
- .gp = IMX_GPIO_NR(4, 13)
- }
-};
-
-static void setup_spi(void)
-{
- SETUP_IOMUX_PADS(ecspi1_pads);
-}
-
-iomux_v3_cfg_t const pcie_pads[] = {
- IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
/* POWER */
- IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL)),
/* RESET */
-};
-
-static void setup_pcie(void)
-{
- SETUP_IOMUX_PADS(pcie_pads);
-}
-
-iomux_v3_cfg_t const di0_pads[] = {
- IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK), /* DISP0_CLK */
- IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02), /* DISP0_HSYNC
*/
- IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03), /* DISP0_VSYNC
*/
-};
-
-static void setup_iomux_uart(void)
-{
- SETUP_IOMUX_PADS(uart1_pads);
-}
-
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg usdhc_cfg[3] = {
- {USDHC2_BASE_ADDR},
- {USDHC3_BASE_ADDR},
- {USDHC4_BASE_ADDR},
-};
-
-#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 2)
-#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 0)
-
-int board_mmc_get_env_dev(int devno)
-{
- return devno - 1;
-}
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC2_BASE_ADDR:
- ret = !gpio_get_value(USDHC2_CD_GPIO);
- break;
- case USDHC3_BASE_ADDR:
- ret = !gpio_get_value(USDHC3_CD_GPIO);
- break;
- case USDHC4_BASE_ADDR:
- ret = 1; /* eMMC/uSDHC4 is always present */
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-#ifndef CONFIG_SPL_BUILD
- int ret;
- int i;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-Boot device node) (Physical Port)
- * mmc0 SD2
- * mmc1 SD3
- * mmc2 eMMC
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc2_pads);
- gpio_direction_input(USDHC2_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- break;
- case 1:
- SETUP_IOMUX_PADS(usdhc3_pads);
- gpio_direction_input(USDHC3_CD_GPIO);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- case 2:
- SETUP_IOMUX_PADS(usdhc4_pads);
- usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- break;
- default:
- printf("Warning: you configured more USDHC controllers"
- "(%d) then supported by the board (%d)\n",
- i + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return -EINVAL;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret)
- return ret;
- }
-
- return 0;
-#else
- struct src *psrc = (struct src *)SRC_BASE_ADDR;
- unsigned reg = readl(&psrc->sbmr1) >> 11;
- /*
- * Upon reading BOOT_CFG register the following map is done:
- * Bit 11 and 12 of BOOT_CFG register can determine the current
- * mmc port
- * 0x1 SD1
- * 0x2 SD2
- * 0x3 SD4
- */
-
- switch (reg & 0x3) {
- case 0x1:
- SETUP_IOMUX_PADS(usdhc2_pads);
- usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
- break;
- case 0x2:
- SETUP_IOMUX_PADS(usdhc3_pads);
- usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
- break;
- case 0x3:
- SETUP_IOMUX_PADS(usdhc4_pads);
- usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
- break;
- }
-
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-#endif
-}
-#endif
-
-static int ar8031_phy_fixup(struct phy_device *phydev)
-{
- unsigned short val;
-
- /* To enable AR8031 ouput a 125MHz clk from CLK_25M */
- phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
- phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
- phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
-
- val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
- val &= 0xffe3;
- val |= 0x18;
- phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
-
- /* introduce tx clock delay */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
- val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
- val |= 0x0100;
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
-
- return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
- ar8031_phy_fixup(phydev);
-
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
-}
-
-#if defined(CONFIG_VIDEO_IPUV3)
-static void disable_lvds(struct display_info_t const *dev)
-{
- struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
-
- int reg = readl(&iomux->gpr[2]);
-
- reg &= ~(IOMUXC_GPR2_LVDS_CH0_MODE_MASK |
- IOMUXC_GPR2_LVDS_CH1_MODE_MASK);
-
- writel(reg, &iomux->gpr[2]);
-}
-
-static void do_enable_hdmi(struct display_info_t const *dev)
-{
- disable_lvds(dev);
- imx_enable_hdmi_phy();
-}
-
-struct display_info_t const displays[] = {{
- .bus = -1,
- .addr = 0,
- .pixfmt = IPU_PIX_FMT_RGB666,
- .detect = NULL,
- .enable = enable_lvds,
- .mode = {
- .name = "Hannstar-XGA",
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15384,
- .left_margin = 160,
- .right_margin = 24,
- .upper_margin = 29,
- .lower_margin = 3,
- .hsync_len = 136,
- .vsync_len = 6,
- .sync = FB_SYNC_EXT,
- .vmode = FB_VMODE_NONINTERLACED
-} }, {
- .bus = -1,
- .addr = 0,
- .pixfmt = IPU_PIX_FMT_RGB24,
- .detect = detect_hdmi,
- .enable = do_enable_hdmi,
- .mode = {
- .name = "HDMI",
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15384,
- .left_margin = 160,
- .right_margin = 24,
- .upper_margin = 29,
- .lower_margin = 3,
- .hsync_len = 136,
- .vsync_len = 6,
- .sync = FB_SYNC_EXT,
- .vmode = FB_VMODE_NONINTERLACED
-} }, {
- .bus = 0,
- .addr = 0,
- .pixfmt = IPU_PIX_FMT_RGB24,
- .detect = NULL,
- .enable = enable_rgb,
- .mode = {
- .name = "SEIKO-WVGA",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 29850,
- .left_margin = 89,
- .right_margin = 164,
- .upper_margin = 23,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 10,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED
-} } };
-size_t display_count = ARRAY_SIZE(displays);
-
-static void setup_display(void)
-{
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
- struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
- int reg;
-
- /* Setup HSYNC, VSYNC, DISP_CLK for debugging purposes */
- SETUP_IOMUX_PADS(di0_pads);
-
- enable_ipu_clock();
- imx_setup_hdmi();
-
- /* Turn on LDB0, LDB1, IPU,IPU DI0 clocks */
- reg = readl(&mxc_ccm->CCGR3);
- reg |= MXC_CCM_CCGR3_LDB_DI0_MASK | MXC_CCM_CCGR3_LDB_DI1_MASK;
- writel(reg, &mxc_ccm->CCGR3);
-
- /* set LDB0, LDB1 clk select to 011/011 */
- reg = readl(&mxc_ccm->cs2cdr);
- reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
- | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
- reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
- | (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
- writel(reg, &mxc_ccm->cs2cdr);
-
- reg = readl(&mxc_ccm->cscmr2);
- reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV | MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV;
- writel(reg, &mxc_ccm->cscmr2);
-
- reg = readl(&mxc_ccm->chsccdr);
- reg |= (CHSCCDR_CLK_SEL_LDB_DI0
- << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
- reg |= (CHSCCDR_CLK_SEL_LDB_DI0
- << MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET);
- writel(reg, &mxc_ccm->chsccdr);
-
- reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
- | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW
- | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
- | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
- | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
- | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
- | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
- | IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED
- | IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0;
- writel(reg, &iomux->gpr[2]);
-
- reg = readl(&iomux->gpr[3]);
- reg = (reg & ~(IOMUXC_GPR3_LVDS1_MUX_CTL_MASK
- | IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
- | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
- << IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET);
- writel(reg, &iomux->gpr[3]);
-}
-#endif /* CONFIG_VIDEO_IPUV3 */
-
-/*
- * Do not overwrite the console
- * Use always serial for U-Boot console
- */
-int overwrite_console(void)
-{
- return 1;
-}
-
-int board_eth_init(bd_t *bis)
-{
- setup_iomux_enet();
- setup_pcie();
-
- return cpu_eth_init(bis);
-}
-
-#ifdef CONFIG_USB_EHCI_MX6
-#define USB_OTHERREGS_OFFSET 0x800
-#define UCTRL_PWR_POL (1 << 9)
-
-static iomux_v3_cfg_t const usb_otg_pads[] = {
- IOMUX_PADS(PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usb_hc1_pads[] = {
- IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static void setup_usb(void)
-{
- SETUP_IOMUX_PADS(usb_otg_pads);
-
- /*
- * set daisy chain for otg_pin_id on 6q.
- * for 6dl, this bit is reserved
- */
- imx_iomux_set_gpr_register(1, 13, 1, 0);
-
- SETUP_IOMUX_PADS(usb_hc1_pads);
-}
-
-int board_ehci_hcd_init(int port)
-{
- u32 *usbnc_usb_ctrl;
-
- if (port > 1)
- return -EINVAL;
-
- usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
- port * 4);
-
- setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
-
- return 0;
-}
-
-int board_ehci_power(int port, int on)
-{
- switch (port) {
- case 0:
- break;
- case 1:
- if (on)
- gpio_direction_output(IMX_GPIO_NR(1, 29), 1);
- else
- gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
- break;
- default:
- printf("MXC USB port %d not yet supported\n", port);
- return -EINVAL;
- }
-
- return 0;
-}
-#endif
-
-int board_early_init_f(void)
-{
- setup_iomux_uart();
-
- return 0;
-}
-
-int board_init(void)
-{
- /* address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-#ifdef CONFIG_MXC_SPI
- setup_spi();
-#endif
- if (is_mx6dq() || is_mx6dqp())
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
- else
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
-#if defined(CONFIG_VIDEO_IPUV3)
- setup_display();
-#endif
-#ifdef CONFIG_USB_EHCI_MX6
- setup_usb();
-#endif
-
- return 0;
-}
-
-int power_init_board(void)
-{
- struct pmic *p;
- unsigned int reg;
- int ret;
-
- p = pfuze_common_init(I2C_PMIC);
- if (!p)
- return -ENODEV;
-
- ret = pfuze_mode_init(p, APS_PFM);
- if (ret < 0)
- return ret;
-
- /* Increase VGEN3 from 2.5 to 2.8V */
- pmic_reg_read(p, PFUZE100_VGEN3VOL, ®);
- reg &= ~LDO_VOL_MASK;
- reg |= LDOB_2_80V;
- pmic_reg_write(p, PFUZE100_VGEN3VOL, reg);
-
- /* Increase VGEN5 from 2.8 to 3V */
- pmic_reg_read(p, PFUZE100_VGEN5VOL, ®);
- reg &= ~LDO_VOL_MASK;
- reg |= LDOB_3_00V;
- pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
-
- return 0;
-}
-
-#ifdef CONFIG_MXC_SPI
-int board_spi_cs_gpio(unsigned bus, unsigned cs)
-{
- return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1;
-}
-#endif
-
-#ifdef CONFIG_CMD_BMODE
-static const struct boot_mode board_boot_modes[] = {
- /* 4 bit bus width */
- {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
- {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
- /* 8 bit bus width */
- {"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)},
- {NULL, 0},
-};
-#endif
-
-int board_late_init(void)
-{
-#ifdef CONFIG_CMD_BMODE
- add_board_boot_modes(board_boot_modes);
-#endif
-
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- env_set("board_name", "SABRESD");
-
- if (is_mx6dqp())
- env_set("board_rev", "MX6QP");
- else if (is_mx6dq())
- env_set("board_rev", "MX6Q");
- else if (is_mx6sdl())
- env_set("board_rev", "MX6DL");
-#endif
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Board: MX6-SabreSD\n");
- return 0;
-}
-
-#ifdef CONFIG_SPL_BUILD
-#include <asm/arch/mx6-ddr.h>
-#include <spl.h>
-#include <linux/libfdt.h>
-
-#ifdef CONFIG_SPL_OS_BOOT
-int spl_start_uboot(void)
-{
- gpio_direction_input(KEY_VOL_UP);
-
- /* Only enter in Falcon mode if KEY_VOL_UP is pressed */
- return gpio_get_value(KEY_VOL_UP);
-}
-#endif
-
-static void ccgr_init(void)
-{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- writel(0x00C03F3F, &ccm->CCGR0);
- writel(0x0030FC03, &ccm->CCGR1);
- writel(0x0FFFC000, &ccm->CCGR2);
- writel(0x3FF00000, &ccm->CCGR3);
- writel(0x00FFF300, &ccm->CCGR4);
- writel(0x0F0000C3, &ccm->CCGR5);
- writel(0x000003FF, &ccm->CCGR6);
-}
-
-static int mx6q_dcd_table[] = {
- 0x020e0798, 0x000C0000,
- 0x020e0758, 0x00000000,
- 0x020e0588, 0x00000030,
- 0x020e0594, 0x00000030,
- 0x020e056c, 0x00000030,
- 0x020e0578, 0x00000030,
- 0x020e074c, 0x00000030,
- 0x020e057c, 0x00000030,
- 0x020e058c, 0x00000000,
- 0x020e059c, 0x00000030,
- 0x020e05a0, 0x00000030,
- 0x020e078c, 0x00000030,
- 0x020e0750, 0x00020000,
- 0x020e05a8, 0x00000030,
- 0x020e05b0, 0x00000030,
- 0x020e0524, 0x00000030,
- 0x020e051c, 0x00000030,
- 0x020e0518, 0x00000030,
- 0x020e050c, 0x00000030,
- 0x020e05b8, 0x00000030,
- 0x020e05c0, 0x00000030,
- 0x020e0774, 0x00020000,
- 0x020e0784, 0x00000030,
- 0x020e0788, 0x00000030,
- 0x020e0794, 0x00000030,
- 0x020e079c, 0x00000030,
- 0x020e07a0, 0x00000030,
- 0x020e07a4, 0x00000030,
- 0x020e07a8, 0x00000030,
- 0x020e0748, 0x00000030,
- 0x020e05ac, 0x00000030,
- 0x020e05b4, 0x00000030,
- 0x020e0528, 0x00000030,
- 0x020e0520, 0x00000030,
- 0x020e0514, 0x00000030,
- 0x020e0510, 0x00000030,
- 0x020e05bc, 0x00000030,
- 0x020e05c4, 0x00000030,
- 0x021b0800, 0xa1390003,
- 0x021b080c, 0x001F001F,
- 0x021b0810, 0x001F001F,
- 0x021b480c, 0x001F001F,
- 0x021b4810, 0x001F001F,
- 0x021b083c, 0x43270338,
- 0x021b0840, 0x03200314,
- 0x021b483c, 0x431A032F,
- 0x021b4840, 0x03200263,
- 0x021b0848, 0x4B434748,
- 0x021b4848, 0x4445404C,
- 0x021b0850, 0x38444542,
- 0x021b4850, 0x4935493A,
- 0x021b081c, 0x33333333,
- 0x021b0820, 0x33333333,
- 0x021b0824, 0x33333333,
- 0x021b0828, 0x33333333,
- 0x021b481c, 0x33333333,
- 0x021b4820, 0x33333333,
- 0x021b4824, 0x33333333,
- 0x021b4828, 0x33333333,
- 0x021b08b8, 0x00000800,
- 0x021b48b8, 0x00000800,
- 0x021b0004, 0x00020036,
- 0x021b0008, 0x09444040,
- 0x021b000c, 0x555A7975,
- 0x021b0010, 0xFF538F64,
- 0x021b0014, 0x01FF00DB,
- 0x021b0018, 0x00001740,
- 0x021b001c, 0x00008000,
- 0x021b002c, 0x000026d2,
- 0x021b0030, 0x005A1023,
- 0x021b0040, 0x00000027,
- 0x021b0000, 0x831A0000,
- 0x021b001c, 0x04088032,
- 0x021b001c, 0x00008033,
- 0x021b001c, 0x00048031,
- 0x021b001c, 0x09408030,
- 0x021b001c, 0x04008040,
- 0x021b0020, 0x00005800,
- 0x021b0818, 0x00011117,
- 0x021b4818, 0x00011117,
- 0x021b0004, 0x00025576,
- 0x021b0404, 0x00011006,
- 0x021b001c, 0x00000000,
-};
-
-static int mx6qp_dcd_table[] = {
- 0x020e0798, 0x000c0000,
- 0x020e0758, 0x00000000,
- 0x020e0588, 0x00000030,
- 0x020e0594, 0x00000030,
- 0x020e056c, 0x00000030,
- 0x020e0578, 0x00000030,
- 0x020e074c, 0x00000030,
- 0x020e057c, 0x00000030,
- 0x020e058c, 0x00000000,
- 0x020e059c, 0x00000030,
- 0x020e05a0, 0x00000030,
- 0x020e078c, 0x00000030,
- 0x020e0750, 0x00020000,
- 0x020e05a8, 0x00000030,
- 0x020e05b0, 0x00000030,
- 0x020e0524, 0x00000030,
- 0x020e051c, 0x00000030,
- 0x020e0518, 0x00000030,
- 0x020e050c, 0x00000030,
- 0x020e05b8, 0x00000030,
- 0x020e05c0, 0x00000030,
- 0x020e0774, 0x00020000,
- 0x020e0784, 0x00000030,
- 0x020e0788, 0x00000030,
- 0x020e0794, 0x00000030,
- 0x020e079c, 0x00000030,
- 0x020e07a0, 0x00000030,
- 0x020e07a4, 0x00000030,
- 0x020e07a8, 0x00000030,
- 0x020e0748, 0x00000030,
- 0x020e05ac, 0x00000030,
- 0x020e05b4, 0x00000030,
- 0x020e0528, 0x00000030,
- 0x020e0520, 0x00000030,
- 0x020e0514, 0x00000030,
- 0x020e0510, 0x00000030,
- 0x020e05bc, 0x00000030,
- 0x020e05c4, 0x00000030,
- 0x021b0800, 0xa1390003,
- 0x021b080c, 0x001b001e,
- 0x021b0810, 0x002e0029,
- 0x021b480c, 0x001b002a,
- 0x021b4810, 0x0019002c,
- 0x021b083c, 0x43240334,
- 0x021b0840, 0x0324031a,
- 0x021b483c, 0x43340344,
- 0x021b4840, 0x03280276,
- 0x021b0848, 0x44383A3E,
- 0x021b4848, 0x3C3C3846,
- 0x021b0850, 0x2e303230,
- 0x021b4850, 0x38283E34,
- 0x021b081c, 0x33333333,
- 0x021b0820, 0x33333333,
- 0x021b0824, 0x33333333,
- 0x021b0828, 0x33333333,
- 0x021b481c, 0x33333333,
- 0x021b4820, 0x33333333,
- 0x021b4824, 0x33333333,
- 0x021b4828, 0x33333333,
- 0x021b08c0, 0x24912249,
- 0x021b48c0, 0x24914289,
- 0x021b08b8, 0x00000800,
- 0x021b48b8, 0x00000800,
- 0x021b0004, 0x00020036,
- 0x021b0008, 0x24444040,
- 0x021b000c, 0x555A7955,
- 0x021b0010, 0xFF320F64,
- 0x021b0014, 0x01ff00db,
- 0x021b0018, 0x00001740,
- 0x021b001c, 0x00008000,
- 0x021b002c, 0x000026d2,
- 0x021b0030, 0x005A1023,
- 0x021b0040, 0x00000027,
- 0x021b0400, 0x14420000,
- 0x021b0000, 0x831A0000,
- 0x021b0890, 0x00400C58,
- 0x00bb0008, 0x00000000,
- 0x00bb000c, 0x2891E41A,
- 0x00bb0038, 0x00000564,
- 0x00bb0014, 0x00000040,
- 0x00bb0028, 0x00000020,
- 0x00bb002c, 0x00000020,
- 0x021b001c, 0x04088032,
- 0x021b001c, 0x00008033,
- 0x021b001c, 0x00048031,
- 0x021b001c, 0x09408030,
- 0x021b001c, 0x04008040,
- 0x021b0020, 0x00005800,
- 0x021b0818, 0x00011117,
- 0x021b4818, 0x00011117,
- 0x021b0004, 0x00025576,
- 0x021b0404, 0x00011006,
- 0x021b001c, 0x00000000,
-};
-
-static int mx6dl_dcd_table[] = {
- 0x020e0774, 0x000C0000,
- 0x020e0754, 0x00000000,
- 0x020e04ac, 0x00000030,
- 0x020e04b0, 0x00000030,
- 0x020e0464, 0x00000030,
- 0x020e0490, 0x00000030,
- 0x020e074c, 0x00000030,
- 0x020e0494, 0x00000030,
- 0x020e04a0, 0x00000000,
- 0x020e04b4, 0x00000030,
- 0x020e04b8, 0x00000030,
- 0x020e076c, 0x00000030,
- 0x020e0750, 0x00020000,
- 0x020e04bc, 0x00000030,
- 0x020e04c0, 0x00000030,
- 0x020e04c4, 0x00000030,
- 0x020e04c8, 0x00000030,
- 0x020e04cc, 0x00000030,
- 0x020e04d0, 0x00000030,
- 0x020e04d4, 0x00000030,
- 0x020e04d8, 0x00000030,
- 0x020e0760, 0x00020000,
- 0x020e0764, 0x00000030,
- 0x020e0770, 0x00000030,
- 0x020e0778, 0x00000030,
- 0x020e077c, 0x00000030,
- 0x020e0780, 0x00000030,
- 0x020e0784, 0x00000030,
- 0x020e078c, 0x00000030,
- 0x020e0748, 0x00000030,
- 0x020e0470, 0x00000030,
- 0x020e0474, 0x00000030,
- 0x020e0478, 0x00000030,
- 0x020e047c, 0x00000030,
- 0x020e0480, 0x00000030,
- 0x020e0484, 0x00000030,
- 0x020e0488, 0x00000030,
- 0x020e048c, 0x00000030,
- 0x021b0800, 0xa1390003,
- 0x021b080c, 0x001F001F,
- 0x021b0810, 0x001F001F,
- 0x021b480c, 0x001F001F,
- 0x021b4810, 0x001F001F,
- 0x021b083c, 0x4220021F,
- 0x021b0840, 0x0207017E,
- 0x021b483c, 0x4201020C,
- 0x021b4840, 0x01660172,
- 0x021b0848, 0x4A4D4E4D,
- 0x021b4848, 0x4A4F5049,
- 0x021b0850, 0x3F3C3D31,
- 0x021b4850, 0x3238372B,
- 0x021b081c, 0x33333333,
- 0x021b0820, 0x33333333,
- 0x021b0824, 0x33333333,
- 0x021b0828, 0x33333333,
- 0x021b481c, 0x33333333,
- 0x021b4820, 0x33333333,
- 0x021b4824, 0x33333333,
- 0x021b4828, 0x33333333,
- 0x021b08b8, 0x00000800,
- 0x021b48b8, 0x00000800,
- 0x021b0004, 0x0002002D,
- 0x021b0008, 0x00333030,
- 0x021b000c, 0x3F435313,
- 0x021b0010, 0xB66E8B63,
- 0x021b0014, 0x01FF00DB,
- 0x021b0018, 0x00001740,
- 0x021b001c, 0x00008000,
- 0x021b002c, 0x000026d2,
- 0x021b0030, 0x00431023,
- 0x021b0040, 0x00000027,
- 0x021b0000, 0x831A0000,
- 0x021b001c, 0x04008032,
- 0x021b001c, 0x00008033,
- 0x021b001c, 0x00048031,
- 0x021b001c, 0x05208030,
- 0x021b001c, 0x04008040,
- 0x021b0020, 0x00005800,
- 0x021b0818, 0x00011117,
- 0x021b4818, 0x00011117,
- 0x021b0004, 0x0002556D,
- 0x021b0404, 0x00011006,
- 0x021b001c, 0x00000000,
-};
-
-static void ddr_init(int *table, int size)
-{
- int i;
-
- for (i = 0; i < size / 2 ; i++)
- writel(table[2 * i + 1], table[2 * i]);
-}
-
-static void spl_dram_init(void)
-{
- if (is_mx6dq())
- ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
- else if (is_mx6dqp())
- ddr_init(mx6qp_dcd_table, ARRAY_SIZE(mx6qp_dcd_table));
- else if (is_mx6sdl())
- ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
-}
-
-void board_init_f(ulong dummy)
-{
- /* DDR initialization */
- spl_dram_init();
-
- /* setup AIPS and disable watchdog */
- arch_cpu_init();
-
- ccgr_init();
- gpr_init();
-
- /* iomux and setup of i2c */
- board_early_init_f();
-
- /* setup GP timer */
- timer_init();
-
- /* UART clocks enabled and gd valid - init serial console */
- preloader_console_init();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
-}
-#endif
diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
deleted file mode 100644
index e0202ef57db..00000000000
--- a/configs/mx6sabresd_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6SABRESD=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_SPL_EXT_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_GADGET_SUPPORT=y
-CONFIG_SPL_USB_SDP_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_SPL=y
-CONFIG_CMD_SPL_WRITE_SIZE=0x20000
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_SDP=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_EFI_PARTITION=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x12000000
-CONFIG_FASTBOOT_BUF_SIZE=0x10000000
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=2
-CONFIG_FSL_ESDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="FSL"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_CI_UDC=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
deleted file mode 100644
index 555942a2c2a..00000000000
--- a/include/configs/mx6sabresd.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- *
- * Configuration settings for the Freescale i.MX6Q SabreSD board.
- */
-
-#ifndef __MX6SABRESD_CONFIG_H
-#define __MX6SABRESD_CONFIG_H
-
-#ifdef CONFIG_SPL
-#include "imx6_spl.h"
-#endif
-
-#define CONFIG_MACH_TYPE 3980
-#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONSOLE_DEV "ttymxc0"
-
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
-#include "mx6sabre_common.h"
-
-/* Falcon Mode */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
-#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
-
-/* Falcon Mode - MMC support: args@1MB kernel@2MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE /
512)
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
-
-#define CONFIG_SYS_FSL_USDHC_NUM 3
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */
-#endif
-
-#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_PCIE_IMX
-#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
-#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19)
-#endif
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED 100000
-
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-
-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller
number */
-#endif
-
-#endif /* __MX6SABRESD_CONFIG_H */
--
2.19.1.1215.g8438c0b245-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
