On Mon, Jul 16, 2018 at 01:49:39PM +0530, Jagan Teki wrote: > Reuse mmc0 node from sun7i-a20.dtsi like other board > dts files for Primo73 tablet dts file, and drop in dts > mmc0 definition. > > Cc: Siarhei Siamashka <siarhei.siamas...@gmail.com> > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > --- > arch/arm/dts/sun7i-a20-primo73.dts | 20 ++++++++++---------- > 1 file changed, 10 insertions(+), 10 deletions(-) > > diff --git a/arch/arm/dts/sun7i-a20-primo73.dts > b/arch/arm/dts/sun7i-a20-primo73.dts > index 0658f82675..942a955309 100644 > --- a/arch/arm/dts/sun7i-a20-primo73.dts > +++ b/arch/arm/dts/sun7i-a20-primo73.dts > @@ -62,16 +62,6 @@ > }; > > soc@01c00000 { > - mmc0: mmc@01c0f000 { > - pinctrl-names = "default"; > - pinctrl-0 = <&mmc0_pins_a>, > <&mmc0_cd_pin_reference_design>; > - vmmc-supply = <®_vcc3v3>; > - bus-width = <4>; > - cd-gpios = <&pio 7 1 0>; /* PH1 */ > - cd-inverted; > - status = "okay"; > - }; > - > usbphy: phy@01c13400 { > usb2_vbus-supply = <®_usb2_vbus>; > status = "okay"; > @@ -100,3 +90,13 @@ > status = "okay"; > }; > }; > + > +&mmc0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; > + vmmc-supply = <®_vcc3v3>; > + bus-width = <4>; > + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ > + cd-inverted; > + status = "okay"; > +};
You're not adding the node, you're just moving it around. Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot