Usually eMMC is default env fat device for environment,
if MMC_SUNXI_SLOT_EXTRA != 1 Sunxi always probed emmc
device as 1. but with DM_MMC it can be more possible to
probe eMMC as device 2 since for most of the sunxi platforms
eMMC is configured mmc2.
So update the fastboot mmc default device as 2 if DM_MMC and
MMC_SUNXI_SLOT_EXTRA != 1 slot is 2 defined but some boards
may not use all possible mmc devices or partly disabled in DT,
for those update the device in board specific defconfig.
Cc: Olliver Schinagl <oli...@schinagl.nl>
Cc: Chen-Yu Tsai <w...@csie.org>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 +
configs/Sinlinx_SinA33_defconfig | 1 +
configs/amarula_a64_relic_defconfig | 1 +
drivers/fastboot/Kconfig | 3 ++-
4 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig
b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
index 5657fc2594..20ea254191 100644
--- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig
+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
@@ -29,4 +29,5 @@ CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig
index 394534b8b5..7841219a65 100644
--- a/configs/Sinlinx_SinA33_defconfig
+++ b/configs/Sinlinx_SinA33_defconfig
@@ -21,5 +21,6 @@ CONFIG_DFU_RAM=y
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_MUSB_GADGET=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_USB_FUNCTION_MASS_STORAGE=y
diff --git a/configs/amarula_a64_relic_defconfig
b/configs/amarula_a64_relic_defconfig
index b72cbfabc6..caeb3f6008 100644
--- a/configs/amarula_a64_relic_defconfig
+++ b/configs/amarula_a64_relic_defconfig
@@ -12,4 +12,5 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-amarula-relic"
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_USB_MUSB_GADGET=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index bc25ea1d9c..4a1bfd119c 100644
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -88,7 +88,8 @@ config FASTBOOT_FLASH_MMC_DEV
int "Define FASTBOOT MMC FLASH default device"
depends on FASTBOOT_FLASH_MMC
default 0 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1
- default 1 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1
+ default 1 if ARCH_SUNXI && !DM_MMC && MMC_SUNXI_SLOT_EXTRA != -1
+ default 2 if ARCH_SUNXI && DM_MMC && MMC_SUNXI_SLOT_EXTRA != -1
help
The fastboot "flash" command requires additional information
regarding the non-volatile storage device. Define this to
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
