[U-Boot] [PATCH 08/25] ARM: dts: sun7i: Add mmc0 node for Primo73 tablet

[Jagan Teki]

Reuse mmc0 node from sun7i-a20.dtsi like other board
dts files for Primo73 tablet dts file, and drop in dts
mmc0 definition.

Cc: Siarhei Siamashka <siarhei.siamas...@gmail.com>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
 arch/arm/dts/sun7i-a20-primo73.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/sun7i-a20-primo73.dts 
b/arch/arm/dts/sun7i-a20-primo73.dts
index 0658f82675..942a955309 100644
--- a/arch/arm/dts/sun7i-a20-primo73.dts
+++ b/arch/arm/dts/sun7i-a20-primo73.dts
@@ -62,16 +62,6 @@
        };
 
        soc@01c00000 {
-               mmc0: mmc@01c0f000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc0_pins_a>, 
<&mmc0_cd_pin_reference_design>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       cd-gpios = <&pio 7 1 0>; /* PH1 */
-                       cd-inverted;
-                       status = "okay";
-               };
-
                usbphy: phy@01c13400 {
                        usb2_vbus-supply = <&reg_usb2_vbus>;
                        status = "okay";
@@ -100,3 +90,13 @@
                status = "okay";
        };
 };
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+       cd-inverted;
+       status = "okay";
+};
-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot